Radial Leaded PPTC FRV Series RoHS AGENCY RECOGNITION FEATURES • Low hold current, solid state, radial leaded product ideal for up to 265VAC/DC • Application: Line Voltage Power Supply, Transformer and appliances • Operation Current: 0.05A ~ 2.00A • Maximum Operating Voltage: 240VAC/DC • Maximum Interrupt Voltage: 265VAC/DC • Temperature Range: -20°C to 85°C • UL (E211981) • C-UL (E211981) • TUV (R50087018) ELECTRICAL CHARACTERISTICS (23°C) Part Number Hold Trip Max.Time Current Current to Trip IH, A IT, A at 5xIH, S Maximum Current IMAX, A Rated Voltage VMAX, VAC/DC Max.Int Voltage VMAX, VAC Typical Resistance Power RMIN R1MAX Pd, W Ohm Ohms FRV005-240F 0.05 0.12 15.0 1.0 240 265 0.70 18.50 65.00 FRV008-240F 0.08 0.19 15.0 1.2 240 265 0.80 7.40 26.00 FRV012-240F 0.12 0.30 15.0 1.2 240 265 1.00 3.00 12.00 FRV016-240F 0.16 0.37 15.0 2.0 240 265 1.40 2.50 7.80 FRV025-240F 0.25 0.56 18.5 3.5 240 265 1.50 1.30 3.80 FRV033-240F 0.33 0.74 18.5 4.5 240 265 1.70 0.83 2.60 FRV040-240F 0.40 0.90 24.0 5.5 240 265 2.00 0.60 1.90 FRV055-240F 0.55 1.25 26.0 7.0 240 265 3.40 0.45 1.45 FRV075-240F 0.75 1.50 18.0 7.5 240 265 2.60 0.32 0.84 FRV100-240F 1.00 2.00 21.0 10.0 240 265 2.90 0.22 0.58 FRV125-240F 1.25 2.50 23.0 12.5 240 265 3.30 0.17 0.44 FRV200-240F 2.00 4.00 28.0 20.0 240 265 4.50 0.09 0.22 IH=Hold current-maximum current at which the device will not trip at 23°C still air. IT=Trip current-minimum current at which the device will always trip at 23°C still air. V MAX=Maximum voltage device can withstand without damage at its rated current. I MAX=Maximum fault current device can withstand without damage at rated voltage (V MAX). Pd=Typical power dissipated from device when in the tripped state in 23°C still air environment. RMIN=Minimum device resistance at 23°C. R1MAX=Maximum device resistance at 23°C, 1 hour after tripping. Figure 1 Lead Size: 24AWG Φ 0.51 mm Diameter Figure 2 Lead Size: 22AWG Φ 0.65 mm Diameter Physical specifications: Lead material: FRV005-240F ~ FRV016-240F Tin plated copper, 24AWG. FRV025-240F ~ FRV040-240F Tin plated copper, 22AWG. FRV055-240F Tin plated copper, 20AWG Soldering characteristics: MIL-STD-202, Method 208E. Insulating coating: Flame retardant epoxy, meets UL-94V-0 requirement. Figure 3 Lead Size: 20AWG Φ 0.81 mm Diameter Figure 4 Lead Size: 20AWG Φ 0.81 mm Diameter FRV PRODUCT DIMENSIONS (MILLIMETERS) Part Number FRV005-240F FRV008-240F FRV012-240F FRV016-240F FRV025-240F FRV033-240F FRV040-240F FRV055-240F FRV075-240F FRV100-240F FRV125-240F FRV200-240F Figure 1 1 1 1 2 2 2 3 3 4 4 3 A B C D E F Maximum Maximum Typical Minimum Maximum Typical 8.3 10.7 5.1 7.6 3.8 1.6 8.3 10.7 5.1 7.6 3.8 1.6 8.3 10.7 5.1 7.6 3.8 1.6 9.9 12.5 5.1 7.6 3.8 1.6 9.6 17.4 5.1 7.6 3.8 1.8 11.4 16.5 5.1 7.6 3.8 1.8 11.5 19.5 5.1 7.6 3.8 1.8 14.0 21.7 5.1 7.6 4.1 1.9 11.5 23.4 5.1 7.6 4.8 1.9 18.7 24.4 10.2 7.6 5.1 1.9 21.2 27.4 10.2 7.6 5.3 1.9 24.9 33.8 10.2 7.6 6.1 1.9 Page 1 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5EB09 2013.11.25 Radial Leaded PPTC FRV Series RoHS THERMAL DERATING CURVE FRV Series Precent of Rated Hold and Trip Current 200% A= FRV005-240F~ FRV055-240F 150% B= FRV075-240F ~ FRV200-240F 100% 50% A B 0% -20 0 20 40 60 80 Ambient Temperature (C) TYPICAL TIME-TO-TRIP AT 23°C Time-to-trip (S) 1000 A B C D E F G H 100 10 1 0.1 0.01 0.1 1 = = = = = = = = FRV005-240F FRV008-240F FRV012-240F FRV016-240F FRV025-240F FRV033-240F FRV040-240F FRV055-240F 10 NOTE: All specifications subject to change without notice. Page 2 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5EB09 2013.11.25