AD10CG - RFE International, Inc.

MULTILAYER CERAMIC CAPACITOR
RoHS
AD Series (C0G/NPO): Axial Leaded
INTRODUCTION
FEATURES
Radial Leaded Multilayer Ceramic Capacitors are
made with a superior epoxy coating for moisture
and mechanical protection. The small size is
suitable for a wide range of applications, including:
data processing, telecommunications,
instrumentation, and industrial controls.
• Epoxy Coating
• Minature Size
• Auto Insertable
• Operating Temperature Range -55 to 125°C
• Temperature Characterisistics 0 ± 30 PPM/°C
PART NUMBER EXAMPLE
AD10 CG 104 K 500 R
Packing Code
Temperature
Coefficient
Voltage Code
Tolerance Code
P=5.0+/-0.5mm
T1=6.0+/-0.3mm
W=52+/-1
L1=L2=24
SIZE CODE & CAPACITANCE RANGE
Dimensions (mm)
Size Code
T (max)
AD10
2.6
AD15
4.0
3.1
Voltage Vdc
Voltage Code
6.3V
10V
16V
25V
50V
100V
250V
6.3V
10V
16V
25V
50V
100V
250V
500V
060
100
160
250
500
101
251
60
100
160
250
500
101
251
501
C0G / NPO (pF)
D (max)
5.1
1 ~ 10,000
1 ~ 4,700
100 ~ 2,700
3,900 ~ 33,000
3,900 ~ 10,000
3,300 ~ 8,200
100 ~ 3,300
CAPACITANCE CODE
Code
Capacitance
1R0
3R3
100
470
101
102
222
1.0pF
3.3pF
10pF
47pF
100pF
1000pF
2200pF
103
10000pF
333
33000 pF
Page 1 of 4
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1BD03
2012.12.13
MULTILAYER CERAMIC CAPACITOR
RoHS
AD Series (C0G/NPO): Axial Leaded
TOLERANCE CODE
Symbol
Cap.
TEMPERATURE COEFFICIENT
Tol.
C
±0.25pF
D
±0.5pF
F
±1%
G
±2%
J
±5%
K
±10%
M
±20%
Code
Temp.
Charact.
Temperature
Range
Capacitance
Change
CG
C0G/NPO
-55 ~ 125°C
0±30 ppm/°C
X5R
X5R
-55 ~ 85°C
±15°C
XR
X7R
-55 ~ 125°C
±15°C
YV
Y5V
-30 ~ 85°C
+22°C, -82%
ZU
Z5U
+10 ~ 85°C
+22°C, -56%
* See other AD Series for X5R, X7R, Y5V, Z5U
+80%, -20%
Z
DIMENSIONS
Tape Spec.
Symbol Dimension (mm)
5.08±0.51
Pitch of component
P
Culmulative Tolerance of P
±0.15
Over 6 Consecutive Units.
6.0±1.0
Tape Width
Wt
Lead Wire Protrusion
Le
1.0 max
Lead Extension into Tape
Li
1.5 max
Offset Between Tapes
T
0.8 max
52.4±1.5
Width Between Tapes
W
Lead Diameter
d
0.483
Reel Spec.
Centered
Core Diameter
Reel Diameter
Core Width
Recess Depth
Arbor Hole
Deflection from Nominal
Position
Symbol Dimension (mm)
±0.76
C
D1
34.9-92.1
Standard 82
D2
360 max
Standard 340
W1
67(+1.5, -0)
9.5 min.
R
Standard 16
13.89-38.10
H0
Standard 17
h
1.2 max
Page 2 of 4
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1BD03
2012.12.13
MULTILAYER CERAMIC CAPACITOR
RoHS
AD Series (C0G/NPO): Axial Leaded
ELECTRICAL CHARACTERISTICS
C0G/NPO
Specification
Parameter
Capacitance
Q
Measuring Condition
With the specified tolerance
Shall be measured at 25°C ± 2°C
at the frequency and voltage
C=> 30pF : Q=> 1000
C < 30pF : Q=> 400+20xC
(C is nominal capacitance)
C<
= [email protected] ± 20%, 1±0.2Vrms
C > [email protected] ± 10%, 1±0.2Vrms
Applied voltage:
Rated voltage x 2.5
Withstanding Voltage
Insulation Resistance
No defects
100V~500V Rated voltage (over) x 1.5
Duration: 1 to 5 sec.
The charge/discharge current is less
than 50mA
More than 10GΩ or 500MΩ • µF
Whichever is less
Apply rated voltage for 1 minute
at 25°C ± 2°C and 70% R.H. max
16Vdc product:
More than 10GΩ or 100MΩ • µF
whichever is less
16Vdc product:
Measurement voltage is 25Vdc
STORAGE
1. The storage conditions <40°C, < 70% R.H.
2. After opening the package, please store in desiccators.
ENVIRONMENTAL AND TEST CHARACTERISTICS
Parameter
Strength of
Specification
Measuring Condition
Termination not to be broken or loosened
termination
Force : 4 LB min.
Keep time : 10±1 sec.
Solderability
Lead wire to be soldered vertically up
to the coating end point.
of leads
At least 75% of lead surface is covered
Solder temperature: 260 ± 5°C
Dipping: 2 ± 0.5 sec.
(containing Ag 2~5%)
(Flux shall be used)
Page 3 of 4
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1BD03
2012.12.13
MULTILAYER CERAMIC CAPACITOR
RoHS
AD Series (C0G/NPO): Axial Leaded
ELECTRICAL CHARACTERISTICS
C0G/NPO
Item
Measuring Condition
Specification
Resistance to Soldering heat
Measuring Condition
Thermal shock
The lead wire is immersed in the melted
solder 1.5mm to 2mm from the main body
at 260 ± 5°C for 10 ± 0.5sec
Let sit at room temperature for 24 ±
2hrs.then measure.
More than 10GΩ or 500MΩ • µF
Whichever is less
Perform the initial measurement.
16Vdc product:
More than 10GΩ or 100MΩ • µF
whichever is less
Step
1
Min.
Temp.
Operating
(℃)
Temp.
Time
30±3
2
Room
Temp.
15
3
Max.
Operating
Temp.
30±3
4
Room
Temp.
15
Perform the initial measurement.
Measuring Condition
Measuring Condition
Moisture resistance
(Steady state)
High temperature loading
Apply the rated DC voltage at
40 ± 2°C and 90 to 95% R.H.
for 500+- 240 hrs.
Remove and let sit at room
temperature for24 ± 2 hrs.,
then measure.
More than 1000MΩ or 50MΩ • µF
Whichever is less
Perform the five cycles according to
the four heat treatments listed in the
following table. Remove and let sit
at room temperature for 24 ± 2hrs.,
then measure.
Apply 200%of the rated DC
voltage for 1000 +48
- 0 hrs at the
maximum operating temperature
± 2°C. Remove and let sit at
room temperature for 24 ± 2hrs,
then measure.
The charge/discharge current is
less
than 50mA.
Perform the initial measurement.
Perform the initial measurement.
* 100% for 100V~500V over.
16Vdc product:
More than 1000MΩ or 10MΩ • µF
whichever is less
• Withstanding voltage: No defects
• Exterior: No abnormalities
Page 4 of 4
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1BD03
2012.12.13