H G F E 46,1 max. D 20,9 max. C B 1,5 A PCB hole pattern F F edge of daugther card for reference only 13,4 `0,05 6 `0,05 22x suggested hole size n2,65 + 0,1 -0 (2x) 4,5 `0,05 A 12,47 `0,05 2 `0,05 24,08 24,5 `0,05 (2x ) 4,5 `0,05 +0 - 0 ,1 2,2 `0,05 12,47 `0,05 14,72 Marking on opposite side (see note 6) E 6,6 `0,05 8,8 3,8 41,3 max. c ,7 3,9 `0,05 c c 6,1 14,3 18,65 n1 c 11,3 c E 33 b 3 `0,05 5 10 13,7 `0,05 10 `0,05 18,5 `0,05 12 8x suggested hole size 9,4 `0,05 Contact 27 datum plane 4 B 2,2 `0,05 4,95 3,9 `0,05 28,6 max. 17,5 max. 6,6 `0,05 13 b 11 12 `0,05 21,2 `0,05 D 14,5 `0,05 D 22,55 `0,05 Drilled hole n1,15 `0,025 1 Drilled hole n1,75 `0,025 23,9 `0,05 (22x) Contact 27 datum plane 9 Copper thickness minimum 25µm Copper thickness minimum 25µm 7 2 Tin thickness minimum 15µm Tin thickness minimum 15µm Finished hole + 0,09 n1 - 0,06 (22x) C 3 NOTES: 8 6 Finished hole + 0,09 n1,6 - 0,06 A ( 10 : 1 ) 13 (8x) C (8x) B ( 10 : 1 ) 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 PLATING TERMINATION AREA: 0,8-1,5 µM TIN (SN 100) 2. ELECTRICAL CHARACTERISTICS: CREEPING AND CLEARANCE DISTANCE; MINIMUM SPACING: - CONTACTS 5-16 TO ANY OTHER CONTACT WITHIN THIS GROUP: 0,7 MM - CONTACTS 17-24 TO ANY OTHER CONTACT WITHIN THIS GROUP: 2,5 MM B Fixing plate Signal contact type 7 Signal contact type 6 Signal contact type 5 Signal contact type 4 Signal contact type 3 Signal contact type 2 Signal contact type 1 Power contact type 4 Power contact type 3 Power contact type 2 Power contact type 1 Case 34pos. male part description 1 5 3 2 2 2 3 5 3 1 3 1 1 quantity - CONTACTS: COPPER ALLOY, PLATING MATING AREA: FLASH GOLD OVER NICKEL - CONTACT 25 TO 26: 5,5 MM - CONTACTS 27-34 TO ANY OTHER CONTACT WITHIN THIS GROUP: 1,4 MM - CONTACTS 13-16 TO 17-20: 3,0 MM - CONTACTS 21-24 TO 25-26: 4,0 MM - CONTACTS 25-26 TO 27-29: 2,0 MM CONTACT CURRENT RATING: - POWER CONTACTS: 16 AMPERES MINIMUM, 13 12 11 10 9 8 7 6 5 4 3 2 1 item INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0022 OHM MAX. - SIGNAL CONTACTS: 0,0085 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 3. POSITIONS WITHOUT CONTACTS: 1, 2, 3, 4 4. WORKING TEMPERATURE: -55°C TO +125°C 5. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED 6. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC G F E D C DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH - SIGNAL CONTACTS: 2 AMPERES NOMINAL H material dwg no. / norm partlist TESTED PER CSA C22.2 NO. 182.3-M1987, ALL CONTACTS UNDER LOAD A B finish: tolerance see notes ISO 2768-m drawn 09.03.05 appd. dim. in mm 09.03.05 Ä 3057 21.07.08 Lehm. d-old 2xb Ä 2592 23.10.06 HS a Origin date name rev. description PRESS-FIT ANGLED AdvancedTCA Kühle dwg no: Inventor 46K1A005 R part no: B see notes PLUG CONNECTOR 30pos. Mankopf norm 5xc 2,5:1 (10:1) title: name date scale: material: A DINA2 sh: 1 ATC30W08MAE3S5X A