F E D C B A NOTES: 1. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL n1,8 (5x) 2. INSULATORS: PBT GF UL 94 V-0, GREEN 3. HIGH POWER CONTACTS 10A: COPPER ALLOY PLATING MATING AREA: 8µin HARD GOLD over min. 50µin NICKEL D PLATING TERMINATION SIDE: 8µin HARD GOLD over min. 50µin NICKEL D SOLDER CUP ACCEPTS CABLE AWG 16-20 (5:1) 4. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 14,23 +- 0,12 0,38 5. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. HEXLOCKING SCREWS: STAINLESS STEEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. O-RING: SILICON; BLUE SEALING COMPOUND 9. RUBBER-GASKET: TPE; BLACK 10. RECOMMENDED PANEL CUT-OUT ON SHEET 2 11. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1in.LB) / max. 40Ncm (3.5 in.LB) 3,6 +- 0,25 0 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. C 5,7 +- 00,31 12. CONNECTOR IS PART MARKED: 6005W5PXX61B30X CONEC ABC C 61,4 +- 0,3 0 8,26 +- 0,22 0,03 47,04 `0,13 38,86 +- 0,23 0,02 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 21,1 +- 0,3 0 Pos. A1 10° B B SEE NOTE 7 O-RING 60005W5PXX61B30X CONEC ABC 4-40 UNC 9,4 4,6 SEE NOTE 12 SW 4,8 TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC tolerance dim. in mm date name scale: material: 29.09.09 Petker appd. D-SUB COMBINATION MALE 29.09.09 Fischer 5W5P SOLDER CUP with threaded insert and hexlocking screw dwg no: Inventor 10 DIN- d-old R date name C A3 15K1A464 Origin rev. description D A title: drawn norm a 2:1 (5:1) SEE NOTES part no: B sh: 1 6005W5PXX61B30X A F E D C B A D D RECOMMENDED PANEL CUT-OUT 42,5 `0,1 i 0,26 A C C R3 n3,1 `0,05 (2x) 11,4 `0,1 B i 0,26 B ,4 ` 10° `1° 0 ,1 3 47,04 `0,1 A TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A B APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION B tolerance dim. in mm date name scale: material: 29.09.09 Petker appd. PANEL CUT-OUT 29.09.09 Fischer D-SUB COM. MALE 5W5P SOLDER CUP with threaded insert and hexlocking screw dwg no: Inventor 10 DIN- d-old R date name C A3 15K1A464 Origin rev. description D A title: drawn norm a 4:1 SEE SHEET 1 part no: B SEE SHEET 1 sh: 2 A