F E D C B A NOTES: 12,58 `0,3 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; GREEN (3,93) 8,65 `0,3 3. SIGNAL CONTACTS: COPPER ALLOY (5:1) PLATING: GOLD FLASH over NICKEL D 4. HIGH POWER CONTACTS 40A: COPPER ALLOY D PLATING, MATING AREA: 30µin HARD GOLD over min. 50µin NICKEL PLATING, TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 14,2 `0,3 6. METAL BRACKETS: STEEL; 320µin TIN over 80µin NICKEL 7. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1mm; PCB-THICKNESS: 1,6mm 8. P.C.B. HOLE DRILLINGS ON SHEET 2 3,2 `0,2 9. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB 0,9 0,31 67 +- 0,45 61,11 +- 0,13 0,12 C 6 +- 00,31 10. CONNECTOR IS PART MARKED: 3024W7PAU60G40X CONEC ABC C 52,81 +- 0,12 0,13 15,38 +- 0,37 0,39 11,07 +- 0,13 0,12 PCB-SNAP n3,75 (7x) 10° n0,6 `0,05 (17x) B 4-40 UNC E DO NOT ALTER CAD DRAWING BY HAND RoHS compliant THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 9,4 `0,3 18,1 SEE NOTE 10 A F 17,2 `0,2 12,24 `0,2 3024W7PAU60G40X CONEC ABC B 3,97 +- 0,2 0,6 METAL BRACKET PRESS FOR FIXING ON PCB scale: material: tolerance 2:1 (5:1) see notes dim. in mm date drawn 18.03.15 appd. 18.03.15 A title: name D-SUB COMBINATION MALE 90° Henneboel 24W7P 0.370inch with threaded insert; metal bracket and snap dwg no: DIN- Schmidt norm d-old Original rev. description D date part no: name C A3 13K1A4921 R a B sh: 1/2 3024W7PAU60G40X A F E D C B A D D P.C.B. HOLE DRILLINGS (P.C.B TOP SIDE) 61,11 +- 0,13 0,12 20,57 `0,1 Ø4,1 `0,1 (7x) 13,76 `0,1 C 6,91 `0,1 13,14 15,1 `0,1 A1 C Ø3,1 `0,1 (2x) 1 Ø1 +- 0,1 0 (17) 2,77 `0,1 5,54 `0,1 10,3 `0,1 P.C.B. EDGE 8,28 `0,1 11,05 `0,1 13,82 `0,1 B B 16,56 `0,1 19,33 `0,1 A F E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 22,1 `0,1 scale: material: tolerance 2:1 SEE SHEET 1 dim. in mm date drawn 18.03.15 appd. 18.03.15 A title: name Henneboel P.C.B. HOLE DRILLINGS Schmidt D-SUB COMBINATION MALE 90° 24W7P with threaded insert, metal bracket and snap dwg no: DIN- norm d-old Original rev. description D date part no: name C A3 13K1A4921 R a B sh: 2/2 SEE SHEET 1 A