E D C n0,6 `0,05 (44x) F NOTES: 1. FOR WAVESOLDERING ( SOLDER BATH TEMPERATURE 240°C FOR 5 SEC. / AND SOLDER PREHEAT 120°C FOR 120 SEC. ) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. SIGNAL CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): D B 3,3 +- 0,5 0 A 6,35 `0,3 (5:1) o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL D o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL SEALING COMPOUND 8. FRAME: ZINC DIE CAST; NICKEL PLATED max. 2 5,6 `0,3 min. 200µin TIN over 80µin NICKEL 7. HEXLOCKING SCREWS: STAINLESS STEEL 8,14 `0,3 120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; 10,68 `0,3 o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/ 9. FIXING PLATE: PBT GF UL 94 V-0; BLACK 11. RUBBER GASKET: TPE 12. SEALING COMPOUND: PUR; BLUE 13. P.C.B. HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.40Ncm (3.5 in.LB) 15. CONNECTOR IS PART MARKED: 6HDD44PoY99R20X CONEC ABC (see note 4) 5,7 +- 00,31 3,6 +- 0,25 0 10. O-RING: SILICON; BLUE 8,26 +- 0,22 0,03 61,4 +- 0,3 0 C RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 47,04 `0,13 38,86 +- 0,23 0,02 21,1 +- 0,3 0 Pos. 1 C Pos. 16 Pos. 31 10° METAL BRACKET FIXING PLATE 9,9 `0,2 6HDD44PoY99R20X CONEC ABC O-RING 4-40 UNC SEE NOTE 8 SEE NOTE 15 4,6 9,4 7,15 `0,2 B Ø3,18 (2x) B SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 4-40 UNC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date name drawn 11.07.12 Henneboel appd. 11.07.12 Koch D-SUB HD MALE 90° 44pos. SOLDER PIN ANGLED threaded insert,metal bracket,fixing-plate,hex bolt dwg no: DIN- norm d-old 1xb Ä4375 a Original rev. description D 11.07.12 A title: 18K1A476 K.H 15K1A1075 R date name part no: C A3 b sh: 1/2 6HDD44PoY99R20X (see note 4) B A F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D D 47,04 `0,13 33,147 `0,05 1,143 `0,1 7,01 `0,03 n0,9 +- 0,1 0 (44x) FRONTPANEL 3,3 `0,1 4,85 P.C.B. EDGE 2,54 `0,1 16,526 `0,1 2,54 `0,1 n3,1 `0,1 (2x) 10,75 2,286 `0,1 1 C C RECOMMENDED PANEL CUT-OUT 42,5 `0,1 i 0,26 A 11,4 `0,1 B 10°`1° B i 0,26 B ,13 `0 E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 47,04 `0,1 A F 4 R3, n3,1 `0,1 (2x) B A scale: material: tolerance 3:1 see sheet 1 dim. in mm date name A title: drawn 11.07.12 Henneboel P.C.B. HOLE DRILLINGS appd. 11.07.12 Koch PANEL CUT-OUT D-SUB Male 44pos. HD SOLDER PIN 90° dwg no: DIN- norm d-old Original rev. description D date name part no: C A3 15K1A1075 R a B sh: 2/2 SEE SHEET 1 A