H G F E D C B A 44 `0,05 44 `0,05 88 37,6 `0,05 n2,6 F F 33,4 `0,05 29,2 `0,05 37,7 `0,05 25 `0,05 32,65 `0,05 20,8 `0,05 27,6 `0,05 Pos. 46 and 47 5mm recessed 16,6 `0,05 12,4 `0,05 8,2 `0,05 E 4,1 `0,05 9,5 `0,05 Drilled hole n1,15 `0,025 Drilled hole n1,75 `0,025 14,9 `0,05 (24x) see note 3 3 2 Copper thickness minimum 25µm 1 NOTES: Copper thickness minimum 25µm 23 `0,05 C Tin thickness minimum 15µm Tin thickness minimum 15µm 1. MATERIALS AND FINISHES: (20x) 17,6 `0,05 20,3 `0,05 4 D 20x suggested hole size 6,8 `0,05 12,2 `0,05 C 2,125 `0,05 B 2,7 `0,05 2,7 `0,05 ,3 +0 - 0 ,1 ( 3x ) (2x ) 94 max. 1 n3 n3 ,5 12,7 max. +0 - 0 ,1 Crimp contacts (3x) must be ordered separately 0,2 `0,05 A 3,9 0,8 see note 6 24x suggested hole size 2,125 `0,05 2,125 `0,05 6 2,125 `0,05 18,8 4 `0,05 0,625 D E - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 - CONTACTS: COPPER ALLOY, PLATING MATING AREA: 0,8 µM GOLD OVER NICKEL Finished hole + 0,09 n1 - 0,06 (24x) PLATING TERMINATION AREA: 0,8-1,5 µM TIN (SN 100) 2. ELECTRICAL CHARACTERISTICS: CREEPING AND CLEARANCE DISTANCE; MINIMUM: Finished hole + 0,09 n1,6 - 0,06 PCB hole pattern A ( 10 : 1 ) - CONTACT 47 TO CONTACT 46: 2,5 MM (20x) B ( 10 : 1 ) - CONTACT 47 TO CONTACT 45: 3,2 MM - CONTACT 46 TO CONTACT 45: 3,2 MM - CONTACT 47 TO SIGNAL CONTACTS: 6,4 MM B - CONTACT 46 TO SIGNAL CONTACTS: 6,4 MM B - CONTACT 45 TO SIGNAL CONTACTS: 2,0 MM CONTACT CURRENT RATING: 3 24 20 1 quantity - POWER CONTACTS POS. 45-47: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 3 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0007 OHM MAX. VOLTAGE PROOF: - CONTACTS POS. 46, 46, 47: 3 kV r.m.s. - CONTACTS POS. 1-20: 1,5 kV r.m.s. - CONTACTS POS. 21-44: 1 kV r.m.s. 3. CONTACTS (3x) ARE CRIMP, REMOVABLE AND ORDERED SEPARATELY 4. WORKING TEMPERATURE: -55°C TO +125°C 5. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED 6. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC G F E D C DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a H material dwg no. / norm partlist - SIGNAL CONTACTS: 0,004 OHM MAX. A 4 3 2 1 item Crimp contact (Pos. 45-47) see note 3 Signal contact (Pos. 21-44) Power contact (Pos. 1-20) Case 47pos. female part description finish: tolerance see notes ISO 2768-m 21.02.06 FEMALE CONNECTOR 47pos. Schmidt CRIMP LOW + PRESS-FIT, STRAIGHT CompactPCI Kühle norm dwg no: d-old date part no: name B Inventor 45K2A027 R rev. description 2:1 see notes title: name date drawn 21.02.06 appd. dim. in mm scale: material: DINA2 sh: 1 CPH47W23FGE1SN9X A A