OCO-M50BS Ultra Low Noise OCXO Sine wave Features Applications: Base station, LTE, 3G & 4G High frequency stability vs. temperature (up to ±2 x 10-10 ) Wide operating temperature range: -40 up to +85 °C Parameter OCO-M50BS5-XX Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change (±5 %) vs. load change (±5 %) vs. aging after 30 days of operation Short term stability Output waveform Output level Output load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range (Vin) Vcontrol (Vc) via external voltage Reference voltage output (Vref) Phase noise @ 10 MHz carrier frequency Specification OCO-M50BS12-XX 8.192 ~ 32.7680 MHz 8.192, 10.0, 12.80, 13.00, 15.36, 16.384, 20.00, 26.00, 32.768 MHz ±2.0 x 10-10 over -40 ~ +85 °C ±5.0 x 10-10 over -40 ~ +85 °C ±1.0 x 10-9 over -40 ~ +85 °C ±5 x 10-10 optional ±2 x 10-10 -10 optional ±2 x 10-10 ±5 x 10 -8 ±2 x 10 1st year -13 < 6 x 10 Allan deviation per 1 s sine wave > 300 mV (rms) 9 dBm ±0.5 dBm 50 Ω ±5 % +5.0 V 5 % +12 V 5 % < 500 mA < 250 mA < 3 min < 2 x 10-8 @ +25 °C > ±4 x 10-7 positive slope 0 ~ +4.5 V 0 ~ +5.0 V +4.5 V +5.0 V < -108 dBc/Hz @ 1 Hz < -137 dBc/Hz @ 10 Hz < -157 dBc/Hz @ 100 Hz < -161 dBc/Hz @ 1 kHz < -162 dBc/Hz @ 10 kHz Harmonics > 30 dBc Operating temperature range Storage temperature range -10 ~ +60 °C, Case height (H) optional > 50 dBc -20 ~ +70 °C, -40 ~ +70 °C -55 ~ +85 °C or -40 ~ +85 °C 10 ~ 16.0 mm Environmental test vibration shock acceleration: 5 g; 10 Hz up to 200 Hz and down to 10 Hz; all 3 axes 75 g, half-sine, 3 ms Pin function 1# 2# 3# 4# 5# Vc Vref RF GND Vdc Connection Circuit Supply voltage Reference output Output signal Case Ground +5 V supply Zout = 50 Case height H = 10 ~ 16 mm 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 19 Aug. 11