Preliminary Datasheet RJK1212DPA 120V, 3A, 310m max. N Channel Power MOS FET High Speed Power Switching R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 Features High speed switching Capable of 4.5 V gate drive Low drive current High density mounting Low on-resistance Pb-free Halogen-free Outline RENESAS Package code: PWSN0008DE-A (Package name: WPAK(3F)) 5 6 7 8 D D D D 5 6 7 8 4 3 2 1 1, 2, 3 Source 4 Gate 5, 6, 7, 8 Drain 4 G S S S 1 2 3 Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Avalanche current Avalanche energy Channel dissipation Channel to case thermal impedance Channel temperature Storage temperature Symbol VDSS VGSS ID ID(pulse)Note1 IDR IAP Note 2 EAS Note 2 Pch Note3 ch-c Note3 Tch Tstg Ratings 120 +12, -5 3 9 3 2 0.34 15 8.33 150 –55 to +150 Unit V V A A A A mJ W C/W C C Notes: 1. PW 10 s, duty cycle 1% 2. Value at Tch = 25C, Rg 50 3. Tc = 25C R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 Page 1 of 6 RJK1212DPA Preliminary Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Gate to source leak current Zero gate voltage drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Gate Resistance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body–drain diode forward voltage Body–drain diode reverse recovery time Symbol V(BR)DSS IGSS IDSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss Rg Qg Qgs Qgd td(on) tr td(off) tf VDF trr Min 120 — — 1.2 — — — — — — — — — — — — — Typ — — — — 240 250 6.5 450 42 17 2.7 4.0 1.5 1.0 6.7 3.0 32 — — — 3.4 0.83 30 Max — ± 0.1 10 2.5 310 340 — — — — — — — — — — — Unit V A A V m m S pF pF pF nC nC nC ns ns ns 1.1 — ns V ns Test Conditions ID = 10 mA, VGS = 0 VGS = +12, -5 V, VDS = 0 VDS = 120 V, VGS = 0 VDS = 10 V, I D = 1 mA ID = 1.5 A, VGS = 10 V Note4 ID = 1.5 A, VGS = 4.5 V Note4 ID = 1.5 A, VDS = 5 V Note4 VDS = 10 V VGS = 0 f = 1 MHz VDD = 50 V VGS = 4.5 V ID = 3 A VGS = 10 V, ID = 1.5 A VDD 30 V RL = 20 Rg = 4.7 IF = 3 A, VGS = 0 Note4 IF =3 A, VGS = 0 diF/ dt = 100 A/ s Notes: 4. Pulse test R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 Page 2 of 6 RJK1212DPA Preliminary Main Characteristics Maximum Safe Operation Area Power vs.Temperature Derating 50 PW = 10 ms 0.1 0.01 Operation in this area is limited by RDS(on) Tc = 25°C 1 shot Pulse 50 100 150 0.001 0.1 200 10 100 300 Drain to Source Voltage VDS (V) Typical Output Characteristics Typical Transfer Characteristics 10 10 V 4.5 V Drain Current ID (A) Pulse Test Tc = 25°C 8 3.4 V 3.2 V 6 4 3.0 V 2 0 1 Case Temperature Tc (°C) 10 VGS = 2.8 V 2 4 6 8 VDS = 5 V Pulse Test 8 Tc = 25°C 6 4 2 0 10 1 2 3 4 5 Drain to Source Voltage VDS (V) Gate to Source Voltage VGS (V) Drain to Source Saturation Voltage vs. Gate to Source Voltage Static Drain to Source on State Resistance vs. Drain Current (Typical) 2.0 Pulse Test 1.6 1.2 ID = 3 A 0.8 2A 0.4 0 1A 2 4 6 8 10 Gate to Source Voltage VGS (V) R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 12 Drain to Source on State Resistance RDS(on) (mΩ) Drain Current ID (A) s n t io ra pe 5 m s 1 μs 0μ O 10 1 10 C Drain Current ID (A) 15 0 Drain to Source Saturation Voltage VDS(on) (V) 10 10 D Channel Dissipation Pch (W) 20 1000 VGS = 4.5 V 10 V 100 Pulse Test 10 0.1 1 10 Drain Current ID (A) Page 3 of 6 Preliminary Typical Capacitance vs. Drain to Source Voltage (Typical) Static Drain to Source on State Resistance vs. Temperature (Typical) 1000 Capacitance C (pF) 800 10000 Pulse Test ID = 1.5 V 600 VGS = 4.5 V 400 10 V 200 1000 Ciss 100 Coss 10 Crss VGS = 0 f = 1 MHz 0 −25 0 25 50 75 1 0.1 100 125 150 1 10 100 1000 Case Temperature Tc (°C) Drain to Source Voltage VDS (V) Dynamic Input Characteristics (Typical) Reverse Drain Current vs. Source to Drain Voltage (Typical) 60 16 ID = 3 A Ta = 25 °C VDD = 50 V VDS 12 25 V VGS 10 V 40 8 20 4 VDD = 50 V 25 V 10 V 0 2 4 0 6 8 10 Gate Charge Qg (nC) 5 Reverse Drain Current IDR (A) 80 Gate to Source Voltage VGS (V) Drain to Source Voltage VDS (V) Static Drain to Source on State Resistance RDS(on) (mΩ) RJK1212DPA VGS = 0 V Pulse Test Ta = 25 °C 4 3 2 1 0 0.2 0.4 0.6 0.8 1.0 Source to Drain Voltage VSD (V) Maximum Avalanche Energy vs. Channel Temperature Derating Avalanche Energy EAS (mJ) 0.5 IAP = 2 A VDD = 50 V duty < 0.1% Rg ≥ 50 Ω 0.4 0.3 0.2 0.1 0 25 50 75 100 125 150 Channel Temperature Tch (°C) R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 Page 4 of 6 RJK1212DPA Preliminary Normalized Transient Thermal Impedance γs (t) Normalized Transient Thermal Impedance vs. Pulse Width 3 D=1 1 0.5 0.3 0.2 0.1 0.1 θ ch – c(t) = γ s (t) • θ ch – c θ ch – c = 8.33°C/W, Tc = 25°C 0.05 2 0.0 PDM 1 0.0 0.03 ot 1sh 0.01 10 μ D= PW T PW T e puls 100 μ 1m 10 m 100 m 1 10 Pulse Width PW (s) Avalanche Test Circuit Avalanche Waveform EAS = L VDS Monitor 1 L • IAP2 • 2 VDSS VDSS – VDD IAP Monitor V(BR)DSS IAP Rg VDS VDD D. U. T ID Vin 15 V 50 Ω 0 VDD Switching Time Test Circuit Switching Time Waveform Vout Monitor Vin Monitor 90% D.U.T. Rg RL Vin Vout Vin 10 V 10% 10% VDS = 30 V 90% td(on) R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 10% tr 90% td(off) tf Page 5 of 6 RJK1212DPA Preliminary Package Dimensions JEITA Package Code ⎯ RENESAS Code PWSN0008DE-A Previous Code WPAK(3F)V MASS[Typ.] 0.075g 0.85Max 5.1 ± 0.2 Unit: mm 0.5 ± 0.15 Package Name WPAK(3F) 4.23Typ 1.27Typ 1.27Typ 0.21Typ 0.5 ± 0.15 +0.1 -0.2 5.9 +0.1 -0.3 6.1 0.05Max 0Min Stand-off 0.545Typ 3.6 ± 0.2 3.92 ± 0.22 0.42 ± 0.08 4.90 ± 0.1 (Sn plating) Notice:The reverse pattern of die-pad support lead described above exists. Ordering Information Orderable Part Number RJK1212DPA-00-J5A Quantity 3000 pcs Shipping Container Taping Note: The symbol of 2nd "-" is occasionally presented as "#". R07DS0091EJ0400 Rev.4.00 Apr 11, 2013 Page 6 of 6 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-651-700, Fax: +44-1628-651-804 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 © 2013 Renesas Electronics Corporation. All rights reserved. Colophon 2.2