200W Outdoor TWT Amplifier for Satellite Communications Ku- Band The T02UO-2G Ku-Band 200 Watt TWT Power Amplifier — higher efficiency in an environmentally sealed compact package designed for outdoor operation note: photo is not necessarily representative of your desired configuration Highly Compact CPI's environmentally sealed 200 W Ku-band hubmount TWTA is the most efficient amplifier in its class. Consuming only 650 W prime power to achieve 175 W at the flange, the Mini-Ku is at least 24% more efficient than any similar product. 10% smaller and 25% lighter than any other 200 W TWTA. Reliable Global Applications Designed and built to survive in extremely adverse environmental conditions. Operates in ambient temperatures up to 60°C. Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Easy to Maintain Modular design and built-in fault diagnostic capability via remote monitor and control. Digital Ready, Simple to Operate User-friendly microprocessor-controlled logic. Integrated Ethernet computer interface and forward power detection over CIF are now standard. A variety of optional configurations, including integral linearizers and BUCs, is available. Worldwide Support Backed by over three decades of satellite communications experience and CPI’s worldwide 24-hour customer support network that includes sixteen regional factory service centers. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: [email protected] www.cpii.com/satcom 200W Outdoor TWT Amplif ier Less Prime Power, More Efficient Ku -B a n d SPECIFICATIONS, T02UO-2G Electrical (continued) Electrical Frequency OPTIONS: • Remote Control Panel Output Power TWT Flange 200 W min. (53.01 dBm) 175 W min. (52.43 dBm) Bandwidth 750 MHz (1750 MHz with wideband option) Gain 38 dB min. at rated power output (68 dB min. with SSIPA option); 40 dB min. at small signal (70 dB min. with SSIPA option) (71 dB min. with SSIPA and linearizer) • Redundant Subsystems • Integrated 1:1 switch control and drive Gain Stability ±0.45 dB/24hr max. (at constant drive and temp.) Small Signal Gain Slope ±0.04 dB/MHz max. Small Signal Gain Variation 1.0 dB pk-pk across any 80 MHz band; 3.5 dB pk-pk across the 750 MHz band 4.5 dB pk-pk across 1750 MHz (wideband option) RF Level Adjust Range 30 dB typ. (not available with low gain version) Input VSWR 1.3:1 max. • Integral Linearizer • Extended Frequency --12.75 - 14.50 GHz • Attenuated Solid State IPA • Serial Interface • Integral L-Band Block Upconverter (BUC --- option is available over 12.75 to 13.25 GHz OR 13.75 to 14.50 GHz frequency ranges only). This data sheet does not provide amplifier specifications for when the BUC is included. Consult CPI for details. 13.75 to 14.50 GHz (output, wideband option 12.75 to 14.50 GHz) Output VSWR 2.2:1 max. (1.3:1 max. with optional external output isolator) 100-240 VAC ±10% single phase, 47-63 Hz Power Consumption 700 VA max; 600 VA typ. at 100 W output power Power Factor 0.95 min. Environmental (Operating) Ambient Temperature -40°C to +60°C operating, including solar loading; -40°C to +71°C non-operating Relative Humidity 100% condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 50,000 ft., non-operating Shock 20 g pk, 11 mS, 1/2 sine Vibration 3 grms Acoustic Noise 65 dBA @ 3 ft. from amplifier Mechanical Forced air with integral blower Computer Interface Ethernet (serial interface optional) -50 dBc below 10 kHz -20 [1.5 + log F(kHz)] dBc 10 kHz to 500 kHz RF Input Connection Type N female (standard) RF Output Connection 10 dB below IESS-308 continuous mask -36 dBc AC fundamental -41 dBc sum of all spurs WR-75 waveguide flange, grooved with UNC 2B 6-32 threaded holes RF Output Monitor Type N female, 44 dB nom. Spurious -60 dBc max. at 175 W flange output Dimensions (W x H x D) AM/PM Conversion 2.0°/dB max. for a single carrier up to 7 dB OBO (up to 4 dB OBO with linearizer option) 8.5 x 8.5 x 15.0 in. max. (216 x 216 x 381 mm) Weight 24.25 lbs (11.0 kg) with no options; 25.41 lbs (11.5 kg) with BUC Residual AM Phase Noise Harmonic Output -60 dBc max. at rated power Noise Power Density (at maximum gain) <-130 dBW/4 kHz, below 12.7 GHz <-70 dBW/4 kHz, passband <-66 dBW/4 kHz, passband with linearizer Group Delay in any 80 MHz band 0.02 ns/MHz linear 0.003 ns/MHz2 parabolic max. 0.75 ns pk-pk ripple max. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. PDF Primary Power Cooling For more detailed information, please refer to the corresponding CPI Technical Description. 10/11 -24 dBc max. with respect to the sum of both carriers at total output power 7 dB OBO (4 dB OBO with optional linearizer) 2.0:1 max. continuous operation; any value for operation without damage Load VSWR Certificate Number: 30515 MKT 249, ISSUE 15 Intermodulation