Rack-Mount Solid State Power Amplifiers CPI Solid Inside and Out C - Band High Power SSPAs C-Band Model S5CI Series 125 and 225 Watt C-band Solid State Power Amplifiers—Efficient and Compact With CPI Brick Inside. Global Applications With CPI-built RF brick inside and plenty of thermal margin, SSPA is rock-solid, highly efficient and easy to maintain. Provides up to 125 or 225 watts of power in a 5.25" rack-mountable unit covering the 5.850 - 6.425 GHz frequency band (to 6.725 GHz optional). Meets International Safety Standards EN-60950 and EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Multi-Carrier Digital Operation Highly linear: excellent AM/PM, phase noise and spectral regrowth performance. Worldwide Support Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes sixteen regional factory service centers. Simple to Operate User-friendly microprocessor-controlled logic with integrated RS422/485 computer interface, digitally controlled attenuator, and optional Ethernet interface. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: [email protected] www.cpii.com/satcom Rack Mount Solid State Power Amplifiers CPI-Built RF Brick Inside C-B a n d SPECIFICATIONS, S5CI Rack-Mount SSPA Electrical OPTIONS: • 1 RU Remote Control Panel • Redundant and Power Combined Subsystems • L-Band BUC • Extended Frequency Range (to 6.725 GHz) • RF Input and Output Monitors Frequency Range 5.850 to 6.425 GHz (to 6.725 GHz RF Output Saturated, min. P1dB, min. Group Delay (in any 80 MHz band) 125 W (50.97 dBm) or 225 W (53.50 dBm)1 100 W (50.0 dBm) or 200 W (53.0 dBm)1 0.03 ns/MHz linear max. 0.003 ns/MHz 2 parabolic max. 1.0 ns pk-pk ripple max. Primary Power 100-240 VAC ±10%, single phase; 47-63 Hz Small Signal Gain (at max. 70 dB min. (at max. gain setting) Power Consumption 800 W typ. for 125 W SSPA; 1500 W typ. for 200/225 W SSPAs Gain Adjustment Range 23 dB Power Factor 0.95 min. Gain Setting Resolution 0.1 dB RF Output Monitor -55 dB ±3 nom. wrt output Gain Stability Over -10°C to +50°C ±1.5 dB At constant temp. and drive ±0.25 dB Environmental (Operating) Ambient Temperature 0°C to +50°C operating Small Signal Gain Slope ±0.04 dB/MHz max. Relative Humidity 95% non-condensing Small Signal Gain Variation ±0.3 dB pk-pk across any 40 MHz band; ±1.5 dB pk-pk across passband Altitude Input VSWR 1.3:1 max. 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 50,000 ft., non-operating Output VSWR 1.3:1 max. 3rd Order Intermod -25 dBc max. at 3dB total backoff from P1dB Harmonic Output -60 dBc max. at P1dB Spurious -60 dBc max. at P1 dB (-55 dBc w/ BUC option Residual AM -50 dBc below 10 kHz -20 [1 +log F(kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz • Ethernet Interface • DC Power Supply Redundancy Module • External Receive Band Reject Filter • High Power Transient Voltage Surge Suppressor (TVSS) Electrical (continued) optional1) Noise Power Density -80 dBW/4 kHz in transmit band, -135 dBW/4 kHz from 3.7 to 4.2 GHz Phase Noise 10 dB below IESS phase noise profile, max. AM/PM Conversion 1.0°/dB max. at 3dB backoff from P1dB SSPA with optional redundant hot-swappable power supplies Note 1: There are two options for the 5.850 to 6.725 GHz frequency range: P1dB of 160 W and P1dB of 80 W. Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 197, ISSUE A 03/11 PDF High Power TVSS Option Clamp Voltage Energy Absorption Peak Current Shunt 440 VDC (line to line protection); 560 VDC (line to ground protection) 2 ms/250 J (line to line protection) 10,000 A repetitive Mechanical Cooling Forced air with integral blower RF Input Connection Type N female RF Output Connection CPR-137 waveguide flange, grooved threaded UNF 2B 10-32 RF Output Monitor Type N female Dimensions (W x H x D) 19.0 x 5.25 x 26 in. (483 x 134 x 661 mm); 19.0 x 7.00 x 26 in. (483 x 178 x 661 mm) with DC Power Supply Redundancy Option Weight 76 lbs (34.6 kg) typ., no options