CPI Beverly Microwave Division manufactures a variety of high power plasma TR tubes and TR Limiters from L-band to Ka-band Typical Operating Parameters Frequency L-Band S-Band C-Band X-Band Ku-Band Ka-band Peak Power Handling 1 MW 500 KW 250 KW 100 KW 50 KW 10 KW Average Power Handling 1 KW 500 W 250 W 100 W 50 W 10 W Pulse Width 5 µs 5 µs 5 µs 5 µs 5 µs 1 µs Insertion Loss 0.4 dB 0.5 dB 0.8 dB 1.0 dB 1.5 dB 2.0 dB Flat Leakage 50 mw 50 mw 50 mw 50 mw 50 mw 75 mw Spike Leakage 150 mw 150 mw 150 mw 150 mw 200 mw 400 mw Recovery Time 10 µs 10 µs 10 µs 5 µs 2 µs 1 µs Performance Advantages • Low Loss • Low Cost • Out of Band Filtering • Low Output Leakage Multifunction Capability • • • • • Single and Dual Configurations Variable Attenuation Excess Noise Generation Coupling Waveguide to Coax Transitions The values listed above represent typical limits for the product and design trade-offs are available for enhanced performance of various parameters. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com, or contact CPI Beverly Microwave Division, 150 Sohier Road, Beverly, MA 01915 Telephone: 1 (978) 922-6000 FAX: 1 (978) 922-2736 email: [email protected] CPI │ Plasma Receiver Protectors Plasma Receiver Protectors TR Tubes & TR Limiters CPI Beverly Microwave Division manufactures a variety of high power plasma Pre-TR Limiters from L-band to Ka-Band Typical Operating Parameters Frequency L-Band S-Band C-Band X-Band Ku-Band Ka-band Peak Power Handling 1 MW 500 KW 500KW 250KW 250KW 100 KW Average Power Handling 10 KW 7 KW 5 KW 5 KW 2KW 100 W Pulse Width 100 µs 100 µs 100 µs 100 µs 100 µs 100 µs Insertion Loss 0.5 dB 0.6 dB 0.8 dB 1.0 dB 1.5 dB 1.8 dB Flat Leakage 50 mw 20 mw 20 mw 20 mw 20 mw 20 mw Spike Leakage 200 mw 100 mw 100 mw 100 mw 100 mw 100 mw Recovery Time 5 µs 2 µs 1 µs 1 µs 0.5 µs 0.5 µs Performance Advantages • Extremely high power handling • Fast recovery time • Low Radioactive Content Multifunction Capability • • • • • Variable Attenuation Excess Noise Generation Filtering Coupling Waveguide to Coax Transitions The values listed above represent typical limits for the product and design trade-offs are available for enhanced performance of various parameters. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com, or contact CPI Beverly Microwave Division, 150 Sohier Road, Beverly, MA 01915 Telephone: 1 (978) 922-6000 FAX: 1 (978) 922-2736 email: [email protected] CPI │ Plasma Receiver Protectors Plasma Receiver Protectors PRE-TR Limiters