Compact Medium Power Amplifier for EMI/EMC Test and Measurement Applications 1 8 .0 - 2 2 .0 GHz The VZK-2792J1 250 W TWT Compact Medium Power Amplifier Global Applications Five rack units tall (8.75 in, 222 mm) 230 VAC operation. Meets International Safety Standard EN61010 and Electromagnetic Compatibility 2004/108/EC. Versatile Worldwide Support Modular design and built-in fault diagnostic capability, backed by CPI’s worldwide 24-hour customer support network that includes twenty regional factory service centers. An integral solid state pre-amplifier and IEEE interface are included as standard features. 45 River Drive Georgetown, Ontario, Canada L7G 2J4 tel: +1 (905) 702-2228 fax: +1 (905) 877-5327 e-mail: [email protected] www.cpii.com/emc Compact Medium Power Amplifier Ultra-wideband, automatic fault recycle, userfriendly microprocessor-controlled logic with integrated computer interface, digital metering, electronic variable attenuation, soft-fail when subjected to extreme load SWR conditions, quiet operation for laboratory environment. 18.0 - 22.0 GHz Compact 1 8 .0 - 2 2. 0 G H z SPECIFICATIONS, VZK-2792J1 Environmental (Operating) Electrical OPTIONS: • Input Isolator (-1 dB gain) • Remote Control Panel • 115 VAC External Step-Up Transformer • 18.0 to 21.7 GHz, 240 W minimum at the flange Ambient Temperature 18.0 to 22.0 GHz Output Power TWT Flange Relative Humidity 95% non-condensing 250 W min. 210 W min. Altitude Up to 10,000 ft (3000 m) with standard adiabatic derating of 2°/1000 ft. Bandwidth 4.0 GHz Shock and Vibration Gain 52.2 dB min. at rated power output; 54.2 dB typ. at small signal Designed to meet conditions normally encountered in the laboratory Acoustic Noise 65 dBA @ 3 ft. from amplifier RF Level Adjust 0 to 20 dB continuous, typ. Gain Stability ±0.25 dB/24 hr max. (at constant drive and temp.) Gain Variation 10.0 dB pk-pk, typ. Input VSWR 2.5:1 max. 1.8:1 max. (with optional input isolator) Mechanical Cooling (TWT) Forced air with integral blower. Rear air intake and exhaust. RF Input Connection 2.9 mm Connector RF Output Connection WR-42 Waveguide Output VSWR 1.6:1 typ. RF Power Monitors 2.9 mm Connector Load VSWR 1.5:1 max. for full spec compliance; 2.0:1 max. continuous operation; any value without damage Dimensions (W x H x D) 19 x 8.75 x 26 in. (483 x 222 x 661 mm) Weight 110 lbs (50 kg) Noise and Spurious -60 dBc/4 kHz typ. Safety EN61010 Harmonic Content -20 dBc Primary Power 220-240 VAC ±10%, single phase, 47-63 Hz Power Consumption 2.6 kVA typ. 3.0 kVA max. Inrush Current 200% max. Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 289, ISSUE 5 -10° to +40°C operating Frequency SEP 13 PDF