DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD Parts are UL1950 & CSA-950 Recognized Under UL File# E162344 or are Pending * Thru Hole or SMD Package * 1500Vrms Minimum Isolation Voltage * UL, IEC & CSA Insulation System * Extended Temperature Range Version TEMP RANGE ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -40OC TO +85OC PART NUMBER Ratio (SEC:PRI ± 3%) PM-DSL10 PM-DSL11 PM-DSL11G PM-DSL12 PM-DSL13 PM-DSL13G PM-DSL14 PM-DSL15 PM-DSL16 PM-DSL17 PM-DSL18 PM-DSL19 PM-DSL20 PM-DSL20G PM-DSL21G PM-DSL22G PM-DSL23 PM-DSL24 PM-DSL24G PM-DSL25 PM-DSL25G PM-DSL26 PM-DSL26G PM-DSL27 PM-DSL27G PM-DSL28 PM-DSL28G PM-DSL29 PM-DSL29G PM-DSL30 PM-DSL30G PM-DSL31 PM-DSL31G PM-DSL32 PM-DSL32G PM-DSL33 PM-DSL33G PM-DSL34 PM-DSL34G PM-DSL35 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 1.0 1 : 1.0 1 : 2.0 1 : 1.5 1 : 3.0 1 : 1.0 1 : 2.0ct 1 : 2.0 1 : 1.0 1 : 1.0 1 : 2.0 1 : 1.5 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 2.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 2.0 Primary PRI - SEC OCL LL (mH TYP.) (H Max.) 12.5 12.5 12.5 16.5 5.0 5.0 12.5 2.25 2.25 1.0 1.0 3.0 0.43 0.43 3.0 2.25 2.0 2.0 2.0 3.0 3.0 3.5 3.5 8.0 8.0 5.0 5.0 4.5 4.5 2.5 2.5 5.8 5.8 4.4 4.4 3.0 3.0 2.0 2.0 3.0 40.0 40.0 40.0 20.0 16 16 18.0 30.0 30.0 12.0 12.0 30.0 10.0 10.0 11.0 30.0 30.0 11.0 11.0 11.0 11.0 30.0 30.0 30.0 30.0 20.0 20.0 20.0 20.0 11.0 11.0 20.0 20.0 20.0 20.0 20.0 DCR ( Max) PRI SEC 4.0 4.0 4.0 3.0 1.5 1.5 2.1 3.63 3.63 2.0 2.0 2.0 1.0 1.65 1.65 1.5 3.36 1.0 2.5 .45 .45 2.5 3.3 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 3.5 3.5 3.0 3.0 3.5 3.5 2.6 2.6 2.6 2.6 2.0 2.0 2.0 2.0 2.5 1.0 .35 .35 1.6 3.05 1.25 1.0 1.0 1.0 1.0 1.0 1.0 2.3 2.3 2.2 2.2 1.0 1.0 1.1 1.1 1.0 1.0 1.0 1.0 1.9 1.9 1.9 1.9 1.0 Package / Schematic EP13/G EP13/AC EP13G/AC EP13/AD EP13/I EP13G/I EP13/D EP13/E EP13/C R/F R/F EP13/A EP13/B EP13G/B EP13G/A EP13G/C EP13/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A EP13G/A EP13/A IC Manufacture IC P/N Globespan Globespan Brooktree BT8970 Brooktree BT8970 Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Brooktree Burr Brown BT8921/8970 BT8921/8970 BT8921/8970 BT8921/8970 BT8921/8970 BT8960 BT8960 BT8960 BT8960 BT8960 BT8960 BT8960 BT8960 BT8960 BT8960 BT8970 BT8970 BT8970 BT8970 BT8952 BT8952 BT8952 BT8952 AFC1124 pm-dslxx 01/02 Specifications subject to change without notice. 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 1 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD TEMP RANGE ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -40OC TO +85OC Ratio Primary PRI - SEC (SEC:PRI) OCL LL (mH TYP.) (H Max.) ± 3% DCR ( Max) PRI SEC PM-DSL35G PM-DSL36 PM-DSL36G PM-DSL37G PM-DSL38G PM-DSL39 PM-DSL39G PM-DSL40 PM-DSL41 PM-DSL41G PM-DSL42 PM-DSL43 PM-DSL44 PM-DSL45 PM-DSL46 PM-DSL47 PM-DSL48 PM-DSL49G PM-DSL50 PM-DSL51G PM-DSL53 PM-DSL53G PM-DSL54 PM-DSL54G PM-DSL55 PM-DSL55G PM-DSL56 PM-DSL56G PM-DSL57 PM-DSL58 PM-DSL59 PM-DSL60 PM-DSL61 PM-DSL61G PM-DSL62 PM-DSL62G PM-DSL63 PM-DSL64 PM-DSL64G 1 : 2.0 1 : 1.8 1 : 1.8 1 : 1.08 1 : 2.0 1 : 4.0 1 : 4.0 1 : 2.0 1 : 4.0 1 : 4.0 1 : 4.0 1 : 4.0 1 : 3.1 1 : 4.0 1 : 4.0 1 : 1.41 1 : 1.8 1 : 1.0 1 : 5.0 1 : 4.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 2.0 1 : 2.0 1 : 1.0 1 : 1.0 1 : 1.0 1 : 2.0 1 : 1.2 1 : 1.2 1 : 1.0 1 : 1.0 1 : 1.42 1 : 1.8 1 : 1.8 3.0 2.95 2.95 0.480 0.530 2.0 2.0 0.800 2.0 2.0 2.0 4.0 3.0 3.0 4.0 0.800 2.75 0.470 2.0 2.0 200 200 200 200 40 40 .410 .410 .440 .50 .24 1.50 4.0 4.0 .40 .40 1.5 3.0 3.0 20.0 11.0 11.0 10.0 25.0 30.0 30.0 10.0 20.0 20.0 30.0 30.0 30.0 30.0 30.0 10.0 50.0 10.0 1.0 17.0 36 36 60 60 40 40 10 10 10 12 15 15 10 10 18 30 30 2.5 3.2 3.2 0.45 3.3 4.0 4.0 1.5 5.0 5.0 2.4 4.0 5.0 5.0 6.0 1.4 6.0 0.6 1.4 3.0 10 10 8.0 8.0 8.0 8.0 .84 1.40 1.2 1.65 .70 2.0 5.5 5.5 1.4 1.4 4.0 3.0 3.0 1.0 1.8 1.8 0.35 1.4 0.3 0.3 0.8 0.5 0.5 0.25 0.4 0.5 1.0 0.5 1.7 3.2 0.7 0.35 0.35 5 5 16 16 8.0 8.0 .40 .70 1.0 1.65 .70 .55 5.5 5.5 1.3 1.3 .75 2.2 2.2 EP13G/A EP13/A EP13G/A EP13G/I EP7G/J EP13/A EP13G/A EP13/D EP10/X EP10G/X EP13/C EP13/C EP13/K EP13/K EP13/L EP13/D P18-11/M EP13G/I EP13/L EP13G/L EP13/B EP13G/B EP13/N EP13G/N EP7/M EP7/M EP13/B EP13G/B EP13/B EP7/O EP13/P EP13/Q EP13/R EP13G/R EP13/I EP13G/I EP13/Q EP13/S EP13G/S Globespan Level One Level One Level One Level One Level One Level One Alcatel Alcatel Alcatel Alcatel Alcatel Texas Motorola Motorola Alcatel Alcatel Texas Level One Level One PM-DSL65 PM-DSL66 PM-DSL67 PM-DSL67G 1 : 1.0 1 : 1.27 1 : 1.41 1 : 1.41 1.25 18 .475 .475 12 12 10 10 1.3 1.3 1.1 1.1 1.3 .85 .90 .90 EP13/B EP13/T EP13/T EP13G/T Lucent Analog Devices Globespan Globespan PART NUMBER Specifications subject to change without notice. Package / Schematic IC Manufacture Burr Brown Burr Brown Burr Brown Alcatel Globespan IC P/N AFC1124 AFC1124 AFC1124 MTK-20140 DLC Globespan Globespan Globespan Globespan Globespan Globespan Globespan Brooktree/LV1 SK70704/6 LXT400/441 LXT400/441 LXT400/441 LXT400/441 LXT441 LXT/441 MTK-20150/140 MTK-20150/140 MTK-20141 1AB071110008 1AB01965-0026 THS6012 XS143462SK1 XS143462SK1 MTK-20141 MTK-20141 TNETD4000R SK70704/706/ SK70704/706/ 725/721 LEO1 AD20msp918 DMT IC DMT IC pm-dslxx 06/00 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 2 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD TEMP RANGE ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -40OC TO +85OC PART NUMBER PM-DSL68G PM-DSL69 PM-DSL70 PM-DSL70G PM-DSL71 PM-DSL72G PM-DSL73G PM-DSL74G PM-DSL75 PM-DSL75G PM-DSL76G PM-DSL77G PM-DSL78 PM-DSL79G PM-DSL80 PM-DSL81 PM-DSL82G PM-DSL83G PM-DSL84 PM-DSL84G PM-DSL85 PM-DSL85G PM-DSL86 PM-DSL87 PM-DSL88 PM-DSL89 PM-DSL89G PM-DSL90 PM-DSL91 PM-DSL92 PM-DSL92G PM-DSL93G PM-DSL95G PM-DSL96G PM-DSL97G PM-DSL98G PM-DSL99 PM-DSL99G PM-DSL102 PM-DSL102G PM-DSL103 PM-DSL103G PM-DSL105G Ratio Primary PRI - SEC (SEC:PRI) OCL LL (mH TYP.) (H Max.) ± 3% DCR ( Max) PRI SEC 1 : 1.27 1 : 2.2 1 : 3.3 1 : 3.3 1 : 1.41 1 : 2.0 1 : 4.0 1 : 5.4 1 : 1.1 1 : 1.1 1 : 1.0 1 : 1.8 1 : 2.0 1 : 1.0 1 : 1.27 1 : 2.3 1 : 5.4 1 : 1.0 1 : 7.48 1 : 7.48 1 : 5.4 1 : 5.4 1 : 4.0 1 : 2.14 1 : 4.0 1 : 2.0 1 : 2.0 1 : 1.0 1:1:1:1 1 : 5.4 1 : 5.4 1 : 3.4 1 : 1.8 1 : 2.0 1 : 2.0 1 : 3.4 1 : 5.4 1 : 5.4 1 : 2.76 1 : 2.76 1 : 4.4 1 : 4.4 1 : 4.0 1.4 2.5 1.1 1.1 1.0 1.4 2.5 2.2 2.6 2.6 2.0 1.6 1.4 1.65 1.8 1.6 5.0 18.5 6.0 6.0 3.2 3.2 2.5 3.74 .85 1.0 .40 .40 1.0 .50 1.0 .44 2.4 2.4 1.0 .30 .80 1.65 1.0 .85 .30 18.5 0.30 0.30 0.35 0.35 0.35 2.0 5.2 5.2 20.0 5.0 4.0 4.0 3.1 5.0 2.5 1.4 3.0 1.50 1.50 3.2 3.2 1.46 1.46 20.0 5.0 0.35 0.35 0.44 2.3 1.4 0.70 0.44 0.35 0.35 1.6 1.6 3.0 0.45 17.6 3.0 .800 .800 .100 .100 2.0 3.0 2.0 2.0 .440 .450 .800 5.0 17.6 2.0 2.0 200 3.0 3.0 3.0 3.0 2.0 3.2 2.0 2.0 2.0 250 0.8 3.00 3.00 3.2 2.75 2.00 410 3.25 3.00 3.00 2.00 2.00 2.50 2.50 2.05 12 11 10 10 12 12 12 12 10 10 5 6 10 18 12 35 18 60 38 38 15 15 13 30 32 30 30 60 15 15 15 15 10 15 16 15 15 25 25 0.35 0.35 15 Package / Schematic EP13G/T EP13/D EP13/D EP13G/D EP13G/B EP13G/B EP13G/A EP13G/A EP13/T EP13G/T EP13G/T EP13G/I EP13/D EP13G/T EP13/T EP13/D EP10/X EP13/N EP13/V EP13G/V EP13/W EP13G/W EP13/W EP13/Y EP17/Z EP13/V EP13G/V EP13/N EP13/AA EP13/V EP13G/V EP13G/V EP13G/V EP13G/AB EP13G/B EP13G/V EP13/V EP13G/V EP13/R EP13G/R EP13/AE EP13G/AE EP13G/V IC Manufacture IC P/N Analog Devices Globespan Conexant Conexant Globespan Globespan Globespan Globespan Analog Devices Analog Devices Centillium Analog Devices Conexant Centillium Analog Devices Level One Globespan Level One AD20msp918 HDSL2 20441 20441 DSL DSL MDSL MDSL2 AD20msp930 AD20msp930 CT-L41SC04 CT-L50SC04 CN9001 CT-L41ST01 AD20msp918 SK 70740 Globespan Globespan GS 2237/GS3137 GS 2237/GS3137 Globespan HDSL Globespan Globespan METALINK METALINK GS 2237/GS3137 GS 2237/GS3137 LXT400 METALINK Globespan pm-dslxx 01/02 Specifications subject to change without notice. 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 3 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD MECH. PKG. "EP13G" MECH. PKG. "EP13" B-014, 17mm TIPS ONLY .730 (18.54) .070 (1.78) 1 10 5 6 .050 (1.27) 10 P IN # 1 W HITE DOT .700 .52 (13.2) (17.78) MAX .137 (3.5) TYP .024 (.61) .394 (10.00) .100 (2.54) REM O VE PIN# 3 3 6 CO RE TAPED PIN #1 WHITE DOT TERM IN ATIONS CANN OT EXCEED STAN DOFFS 4 7 .550 (13.97) MAX .500 (12.70) M AX 5 8 SPECIAL LOW PROFILE BO BBIN .550 (13.97) MA X .024 (.61) 9 2 .100 (2.54) 1 2 3 4 .520 (13.20) MAX 1 NOTE: THIS IS 17.0MM LEAD TIP BOBBIN (B-014 ONLY) 5 .530 (13.46) MAX CORE TAPED .485 (12.32) MAX .010 (0.25) 6 7 8 9 .590 (15.00) MIN .700 (17.78) MAX 10 .028 (0.70) .100 (2.54) .028 (0.7) MIN MECH. PKG. "EP10" 5 6 7 MECH. PKG. " EP10G" 8 .600 (15.24) 8 4 3 2 1 7 6 5 .4 40 (11.18) MAX .413 (10.5) CO RE TAPE .4 75 (12.07) MAX 3 2 .024 (.61) 1 .295 (7.49) .098 (2.4 9) 4 8 4 5 .098 (2.50) .600 (15.24) M AX PIN # 1 W HITE DO T .120 (3.8 1) MIN .0 24 (.6 1) 1 .050 (1.27) PIN # 1 WHIT E DOT .4 80 (12.19) MAX .100 (2.54) PIN #1 W HITE DO T 1 2 3 4 .440 (1 1.18) MAX .490 (1 2.45) MAX C ORE TAPED .440 (11.18) MAX 5 6 7 .028 (0.70) 8 .098 (2.50) .010 (0.25 ) .480 (12.19) MIN .600 (15.24) M AX Specifications subject to change without notice. pm-dslxx 06/00 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 4 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD MECH. PKG. "EP7" 4 5 MECH. PKG. "EP7G" 6 .075 (1.91) 3 2 1 6 PIN #1 WHITE DOT .394 (10.01) MAX 4 .335 (8.51) MAX PIN #1 (Dot) .400 (10.16) MAX 1 2 3 .335 (8.51) MAX .394 (10.01) MAX .118 (3.00) TYP .024 SQ. .098 (2.49) CORE TAPED .197 (5.00) 2 .100 (2.54) .050 (1.27) CORES TAPED 3 5 .375 (9.53) .365 (9.27) MAX .010 (0.25) 1 .197 (5.00) 4 5 .024 (0.6) 6 .100 (2.54) .492 (12.5) .508 (12.9) MECH. PKG. "R" MECH. PKG. "EP17" 5 3 PIN #1 WHITE DOT .760 (19.30) MAX 6 1 .760 (19.30) MAX CORE TAPED CORE CLIPS, 2EA 2 WHITE DOT DENOTES PIN#1 SIDE OF BOBBIN .803 (20.4) MAX .640 (16.26) MAX .04 (1.02) TYP .764 (19.4) MAX .165 (4.19) MIN .197 (5.00) .800 (20.32) TYP .510 (12.95) MAX .014 (.356) .13 (3.3) LEAD LENGTH IS .165" MIN FROM W IRE/SOLDER CONNECTION TO LEAD TIPS. 4 .024 (.61) DIA. 3 2 .024 (.61) DIA .590 (14.99) 1 .028 (.71) 5 6 7 8 (8) (7) (6) (5) CUSTOMER PIN NUMBER ( #) pm-dslxx 01/02 Specifications subject to change without notice. 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 5 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD MECH. PKG. "P18/11" 4 3 5 2 6 1 PIN #1 I.D. .940 (23.88) Max .094 (2.39) .709 (18.0) Max. .420 (11.0) MAX. .190 (4.83) .015 .850 (21.59) .140 .280 Specifications subject to change without notice. pm-dslxx 06/00 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 6 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD PM-DSLxx SCHEMATIC "B" PM-DSLxx SCHEMATIC "A" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 1 SEC #1B PRI #1B 4 SECONDARY 8 (CHIP SIDE) 2 1 10 9 SEC #1B SECONDARY (CHIP SIDE) PRIMARY (LINE SIDE) 7 4 9 2 SEC #1A SEC #1A PRI #1A 7 5 PRI #1A PRI #1B 6 5 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#4 TO PIN#2 2) SECONDARY CENTER TAP IS FORMED BY CONNECTING PIN#7 TO PIN#9 PM-DSLxx SCHEMATIC "D" PM-DSLxx SCHEMATIC "C" WHITE DOT DENOTES PIN #1 10 W HITE DOT DEN OTES PIN #1 1 1 10 SEC #1B PRI #1B 7 SECONDARY or (CHIP SIDE) 8 5 2 SEC #1A PRI #1B PRIMARY (LINE SIDE) PRIM ARY (LINE SIDE) 4 9 2 SECONDARY (CHIP SIDE) SEC #1A 6 5 NOTE: 1) PRIM ARY CENTER TAP IS FORMED BY CONNECTIN G PIN#7 TO PIN#9 2) SECONDA RY CENTER TAP IS FORMED BY CONNECTIN G PIN#2 TO PIN#4 PM-DSLxx SCHEMATIC "E" PM-DSLxx SCHEMATIC "F" W H ITE D O T D EN O TES PIN # 1 WHITE DOT DENOTES PIN #1 1 SEC #1 B P RI #1 B 8 5 7 2 SEC #1 A P RI #1 A SEC O N DA RY (C HIP SID E) SEC #1B 7 PRI #1A PRI #1A 6 4 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#1 TO PIN#4 OR PIN#2 TO PIN#5 2) SECONDARY PIN #8 MAKES NO CONNECTION 10 PRIMARY (LINE SIDE) 1 P RIM A RY (LIN E SIDE) PRI #1A 2 6 4 N OTE: 1) PRIM ARY C EN TER TAP IS F OR M ED BY C ON N EC TIN G PIN# 2 TO PIN # 5 PRI #1B 3 SECONDARY 5 6 2) SEC O N D A RY C EN TER TAP IS F OR M ED BY C ON N EC TIN G PIN# 8 TO PIN # 7 pm-dslxx 01/02 Specifications subject to change without notice. 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 7 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD PM-DSLxx SCHEMATIC "G" PM-DSLxx SCHEMATIC "H" W H ITE D O T D EN O TES PIN #1 WHITE DOT DENOTES PIN #1 10 1 SEC # 1 B SEC O N DA RY (C H IP SID E) P RI # 1 B 9 2 8 3 SEC # 1 A 1 8 SEC #1B PRI #1B PRIM A RY (LIN E SID E) PRIMARY (LINE SIDE) 7 2 6 3 PRI #1A P RI # 1 A SECONDARY (CHIP SIDE) SEC #1A 6 5 N O TE: 1 ) PR IM ARY C E NTER TAP IS FO R M ED BY C O N N EC TIN G PIN# 2 TO P IN #3 4 5 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#6 TO PIN#7 2 ) SEC O N D A RY C EN TER TA P IS F O RM ED BY C O N N EC TIN G PIN# 9 TO P IN #8 2) SECONDARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#3 PM-DSLxx SCHEMATIC "I" PM-DSLxx SCHEMATIC "J" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 1 10 SEC #1B PRI #1A 6 8 3 9 2 PRI #1B 7 4 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 1 PRIMARY SECONDARY IC SIDE SEC #1A PRIMARY (LINE SIDE) LINE SIDE SECONDARY (CHIP SIDE) 3 4 2) SECONDARY CENTER TAP IS FORMED BY CONNECTING PIN#7 TO PIN#9 PM-DSLxx SCHEMATIC "K" PM-DSLxx SCHEMATIC "L" WHITE DOT DENOTES PIN #1 1 PRI #1A PRIMARY 3 (LINE SIDE) 2 WHITE DOT DENOTES PIN #1 1 8 9 PRI #1A SEC #1A 7 SEC #1A 4 PRIMARY (LINE SIDE) 2 SECONDARY (CHIP SIDE) 8 SECONDARY (CHIP SIDE) SEC #1B SEC #1B PRI #1B PRI #1B 7 5 5 4 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#3 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 Specifications subject to change without notice. pm-dslxx 06/00 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 8 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD PM-DSLxx SCHEMATIC "N" PM-DSLxx SCHEMATIC "M" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 6 1 PRI #1B SEC #1B PRIMARY 2 (LINE SIDE) 5 PRI #1A SEC #1B SECONDARY (CHIP SIDE) 8 SEC #1A 4 6 PM-DSLxx SCHEMATIC "P" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 2 6 IC SIDE SECONDARY 9 LINE SIDE 3 IC SIDE LINE SIDE 1 7 4 4 PM-DSLxx SCHEMATIC "Q" PM-DSLxx SCHEMATIC "R" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 1 PRI #1B 10 PR IMARY (LINE SIDE) PRIMARY 4 SECONDARY IC SIDE LINE SIDE 1 PRIMARY (LINE SIDE) PRI #1A 5 PM-DSLxx SCHEMATIC "O" PRIMARY PRI #1B SECONDARY (CHIP SIDE) 3 SEC #1A 3 10 1 4 2 PRI #1A 10 SEC #1B 6 SECONDARY (CHIP S IDE) 9 SEC #1A 5 7 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 7 2) SECO NDARY CENTER TAP IS FOR MED BY CONNECTING PIN#6 TO PIN#9 pm-dslxx 01/02 Specifications subject to change without notice. 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 9 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD PM-DSLxx SCHEMATIC "S" PM-DSLxx SCHEMATIC "T" WHITE DOT DENO TES PIN #1 10 10 1 PRI #1B 4 9 2 PRI #1A 1 PR I # 1B SEC #1B 6 PRIM ARY (LINE SIDE) W HI TE D O T D E NO TE S PIN #1 PR IM A RY (LIN E SID E ) SE C OND ARY (C HIP SIDE) 8 3 9 2 PR I # 1A SEC #1A SE C #1B SE C O N D AR Y (C HIP S ID E ) SE C #1A 7 5 NOTE: 1) PRIM AR Y C ENTER TAP IS FO RM ED BY CONNEC TING PIN#6 TO PIN#9 7 5 N O T E: 1 ) PRIM AR Y C EN TE R TA P IS FO RM ED BY C O N N EC TIN G PI N #8 TO PIN # 9 2) SECO NDAR Y CENTER TAP I S FOR MED BY CONNEC TING PIN#2 TO PIN#4 2 ) SE CO ND A R Y C EN TER TA P IS FO R M ED BY C O N N EC TIN G PI N #2 TO PIN # 3 PM-DSLxx SCHEMATIC "U" PM-DSLxx SCHEMATIC "V" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 10 PRI #1B PRIMARY (LINE SIDE) 1 9 4 PRI #1B SEC #1B 2 7 5 SECONDARY (CHIP SIDE) 4 SECONDARY (CHIP SIDE) PRIMARY (LINE SIDE) 2 SEC #1A PRI #1A PRI #1A 6 1 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#5 2) SECONDARY PIN #7 MAY NO CONNECTION 5 7 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#4 TO PIN#2 PM-DSLxx SCHEMATIC "X" PM-DSLxx SCHEMATIC "W" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 4 1 6 PRI #1A PRI #1B PRIMARY (LINE SIDE) 2 5 PRIMARY 3 (LINE SIDE) 2 SECONDARY (CHIP SIDE) 8 SECONDARY (CHIP SIDE) PRI #1B PRI #1A 5 10 4 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#3 1 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#5 Specifications subject to change without notice. pm-dslxx 06/00 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 10 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD PM-DSLxx SCHEMATIC "Z" PM-DSLxx SCHEMATIC "Y" W HITE D O T D EN O TES PIN # 1 W HITE DO T DENOTES PIN #1 1 10 (6) SEC #1B PRI #1B PRIMARY (LINE SIDE) S EC O N DA RY #1 5 8 (8) 2 7 (9) PRI #1A SECONDARY (CHIP SIDE) SEC O N DA RY (C HIP SID E) SEC #1A 4 PRI #1 A (7) 6 3 (5) 8 2 S EC O N DA RY #2 (10) 6 1 (6) 7 PRIM ARY (L IN E SID E) PRI #1 B 4 (8) 5 CUST OM ER PIN NU MB ER (#) CUSTOM ER PIN (#) N O TE: 1) PR IM A RY C EN TER TAP IS FO R ME D B Y C O N N EC TIN G PIN#2 TO PIN # 3 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN# 5 TO PIN#2 PM-DSLxx SCHEMATIC "AB" PM-DSLxx SCHEMATIC "AA" WHITE DOT DENOTES PIN #1 WHITE DOT DENOTES PIN #1 1 10 1 PRI #1A 10 SEC #1A SEC #1B PRI #1B 2 9 4 7 PRIMARY (LINE SIDE) 4 8 2 9 PRI #1B SECONDARY (CHIP SIDE) SEC #1B 5 7 SEC #1A PRI #1A 5 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#4 TO PIN#2 6 PM-DSLxx SCHEMATIC "AD" PM-DSLxx SCHEMATIC "AC" WHITE DOT DENOTES PIN #1 1 SEC #1B 2 SECONDARY (CHIP SIDE) 3 SEC #1A W H ITE D O T D EN O TES PIN # 1 10 8 PRI # 1B PRI #1B 9 8 PRIM ARY (LINE SIDE ) PRIMARY (LINE SIDE) SEC # 1B 7 2 6 3 PRI # 1A PRI #1A 1 S EC O N DA RY (CH IP SIDE ) SEC # 1A 5 6 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#9 TO PIN#8 4 5 NO TE: 1) PR IM ARY CE NTER TAP IS F OR MED BY CO NN EC TING PIN# 6 TO PIN# 7 2) SECONDARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#3 2) SE CO N DA RY CE NTER TAP IS F OR ME D BY CO NN EC TING PIN# 2 TO PIN# 3 pm-dslxx 01/02 Specifications subject to change without notice. 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 11 DSL LINE ISOLATION TRANSFORMERS THRU HOLE OR SMD PM-DSLxx SCHEMATIC "AE" WHITE DOT DENOTES PIN #1 1 9 SECONDARY #2 PRI #1A 4 2 8 7 SECONDARY #1B PRI #1B 10 SECONDARY #1A 5 6 Specifications subject to change without notice. pm-dslxx 06/00 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 12