25.6 MBPS ATM FILTERS MODULES & SMD ISOLATION TRANSFORMERS * * * * Designed to meet ATM 25.6 PHY specifications. Designed to Support the SEEQ 93C95 PHY Interface. Provides the Cable Isolation & Impedance Matching for 100 Ohm UTP Applications Surface Mount Package. Return Loss (dB Min) PART NUMBER 1-17MHz 17-25Mhz PM-7583 -16 -9 Comm-Comm Rejection (dB Min) 12KHz 5MHz 20MHz 200MHz MAX Insertion Loss (dB) 4MHz 16MHz 24MHz MAX MAX MAX 36MHz MIN 5MHz 16MHz 24MHz -20 -25 -0.6 -10 -20 -3.0 -1.0 -1.8 Cross Talk (dB Min) -50 PM-7583 MECHANICAL -46 600 PM-7583 SCHEMATIC RECOMMENDED P.C.B. LAYOUT Dimensions in mm 16 x 2.54 -50 HI-POT (Vrms Min) TX+ 1 6.7 1:1 1:1 TX- 2 1 15 RX+ 16 7 x 2.54 16 x 1.02 CTX1 3 CTX2 4 14 CRX1 Low Pass Filter Low Pass Filter GND 5 8 9 14 P M 1 2 13 12 11 10 11 UTP TX+ 7 10 UTP RX- UTP TX- 8 9 UTP RX+ PM-7583 100BASE-TX MAGNETICS PHYSICAL DIMENSIONS ................... IN mm 15 13 CRX2 12 GND 6 16 16 RX- 9 PM-7583 YYWW 3 4 5 6 7 8 25.4 4.80 5.70 0.66 TYP 2.54 TYP 0.25 TYP 12.5 Specifications subject to change without notice. pm-758x 7/98 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 1 25.6 MBPS ATM FILTERS MODULES & SMD ISOLATION TRANSFORMERS * * * * Designed to meet ATM 25.6 PHY specifications. Designed to Support the SEEQ 93C95 PHY Interface. Provides the Cable Isolation & Impedance Matching for 100 Ohm UTP Applications Surface Mount Package. ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE 0OC TO 70OC PART NUMBER TRANSMIT TURNS RATIO (1-3 : 16-14) RECEIVE TURNS RATIO (11-9 : 6-8) 1:1 1 : 2CT PM-7582 PRIMARY OCL H Min.) Interwinding Capacitance Cw/w pF Max.) 3000 Leakage Inductance Llk H Max.) 55 DC Resistance DCR HI-POT Ohms Max.) (Vrms Min) 1.6 1.30 APPLICATIONS SCHEMATIC TYPICAL APPLICATION CIRCUIT +2 PM-7582 SEEQ 93C95 Rx 1 3 +26 1:1 6 Vcc 11 4 RJ45 (UTP) 5 6 1 7 28 -27 14 2CT:1 1 1 15 2 1 8 14 13 12 11 10 9 PRI. SEC. 1 1 1 1 SEC. PRI. 7 9 15 1 3 -3 Tx 9 16 16 1 2CT:1 1 49.9 CHASSIS GROUND DIGITAL GROUND 18 16 SCHEMATIC DIAGRAM 1:1 Vcc Vcc 1500 1 2 3 4 5 6 1 7 8 8 ANALOG GROUND DIMENSIONS PHYSICAL DIMENSIONS ................... IN INCHES (mm) 16 15 14 13 12 11 10 9 RECOMMENDED P.C.B. LAYOUT Dimensions in inches (mm) .420 (10.67) 16x.075 (1.91) P M .270 (6.86) 7x.050 (1.27) PM-7582 YYWW 1 16 16x.025 (.64) .350 (8.89) 1 2 3 4 5 6 7 8 8.80 12.70 6.80 8 9 4.80 5.70 0.30 TYP 1.27 TYP 0.25 TYP 9.40 Specifications subject to change without notice. pm-758x 7/98 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 TEL: (949) 452-0511 FAX: (949) 452-0512 http://www.premiermag.com 2