TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC FIGURE 1: SCHEMATIC DIAGRAM MIN. PRIMARY INDUCTANCE (1-3) FREQ. = 100 KHZ @ 0.4Vrms 2300 2484 2680 HY LEAKAGE IND (4-1). (TIE5-6) FREQ. = 100 KHZ @ 0.250Vrms -------- -------- 70 HY 1 UNITS PRIMARY SPEC LIMITS TYP. M AX. PARAMETER 5 (12V@260mA) 4 SECONDARY TURN RATIO'S: 1-3 : 6-5 -------- 3.73 :1 -------- + 3% PRIMARY RESONANT FREQUENCY 500 -------- -------- kHz HIPOT: PRIMARY TO SECONDARY 3000 -------- -------- Vrms 6 3 SHIELD NC FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) 8 WHITE DOT DENOES PIN#1 1 7 2 6 3 5 4 15.00 (.59) MAX 18.54 (.730) MAX P PNK-56002 M YYWW 14.6 (.575) MAX 4.0 (.157) 3.81 (.150) 1 2 3 0.6 (.023) NOTE1: 4 A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B)TRIPLE BASIC INSULATED SECONDARY C) VARNISH FINISHED ASSEMBLY. 12.5 (.492) 8 7 6 5 UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING REV. DESCRIPTION OF CHANGES BY 02/10/09 05/11/09 OGIRINAL RELEASE UPDATE, CEMENT, NO OTHER PP PP TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-56002 REVISION: 05/11/09 ENGR: PETER PHAM REF: LNK-LP SCALE: NONE SHEET: 1 OF 2