M3T-DUMMY80 Dummy IC for 80-pin 0.8mm-pitch QFP (80P6N-A) Dimensions Function This accessory tool connects the probe of an emulation pod and the target, or an MCU and the target. Its dimensions are the same as those of MCU for the 80-pin 0.8mm-pitch QFP (80P6N-A) package. It consists of (1) to (3) shown in the diagram. Attaching Procedure This converter can be used during debugging and board-mounted evaluation in common. When debugging (1) Mount a socket on the target. (2) On top of it, mount the M3T-DUMMY80 and a socket frame in that order. (3) Then connect the probe of the emulation pod to the connector provided at the top of the M3T-DUMMY80. During board-mounted evaluation Mount an MCU and a socket frame on a socket on the target in that order. ① denotes pin numbers on the M3T-DUMMY80. 1 denotes pin numbers of the top of a connector. Symbol Term Dimensions [mm] A Fitting height 5.0 b Pin width 0.3 D Package length 14.0 E Package width 20.0 e Interval in row of pins 0.8 HD Overall length 18.0 HE Overall width 24.0 M Mount pad size 6.3 Foot Pattern Reference Dimensions See Appendix B "Reference Dimensional Drawing for Common 80-pin 0.8mm-pitch QFP Foot Pattern". [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies.