1SS400 - Bruckewell Technology Ltd.

1SS400
Surface Mount Switching Diodes
Features
• Extremely High Switching Speed
• Low Reverse Leakage Current
• High Reliability
• Small Outline Surface Mount SOD-523 Package
• RoHS compliant package
Applications
• High speed switching
Packing & Order Information
3,000/Reel
Graphic symbol
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
ISS400
Unit
VRM
90
V
VR
80
V
Maximum Average Forward Current
IF(AR)
100
mA
Peak Forward Surge [email protected]=1S
IFSM
500
mA
TJ
125
°C
TSTG
40 to +125
°C
Maximum Peak Reverse Voltage
Maximum DC Reverse Voltage
Operating Junction Temperature Range
Storage temperature range
Publication Order Number: [1SS400]
© Bruckewell Technology Corporation Rev. A -2014
1SS400
Surface Mount Switching Diodes
Electrical characteristics (Tc=25°C unless otherwise noted)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Reverse Breakdown Voltage (IR=100μA)
V(BR)R
80
--
--
V
Forward Voltage IF=100mA
VF
--
--
1.2
V
Reverse Current VR=80V
IR
--
--
0.1
μA
Capacitance between terminals VR=0.5V, f=1MHZ
CT
--
--
3.0
pF
Reverse Recovery Time VR=6V, IF=10mA,RL=100Ω
Trr
--
--
4.0
ns
Device marking
PART
1SS400
Publication Order Number: [1SS400]
MARK
A4
© Bruckewell Technology Corporation Rev. A -2014
1SS400
Surface Mount Switching Diodes
■RATING AND CHARACTERISTIC CURVES
FIG.1- FORWARD CHARACTERISTICS
FIG.2- REVERSE CHARACTERISTICS
FIG.3- CAPACITANCE BETWEEN TERMINALS
FIG.4- REVERSE RECOVERY TIME CHARACTERISTICS
FIG.5- SURGE CURRENT CHARACTERISTIC
FIG.6- REVERSE RECOVERY TIME (TRR)
MEASUREMENT CIRCUIT
Publication Order Number: [1SS400]
© Bruckewell Technology Corporation Rev. A -2014
1SS400
Surface Mount Switching Diodes
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [1SS400]
© Bruckewell Technology Corporation Rev. A -2014