1SS400 Surface Mount Switching Diodes Features • Extremely High Switching Speed • Low Reverse Leakage Current • High Reliability • Small Outline Surface Mount SOD-523 Package • RoHS compliant package Applications • High speed switching Packing & Order Information 3,000/Reel Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol ISS400 Unit VRM 90 V VR 80 V Maximum Average Forward Current IF(AR) 100 mA Peak Forward Surge Current@t=1S IFSM 500 mA TJ 125 °C TSTG 40 to +125 °C Maximum Peak Reverse Voltage Maximum DC Reverse Voltage Operating Junction Temperature Range Storage temperature range Publication Order Number: [1SS400] © Bruckewell Technology Corporation Rev. A -2014 1SS400 Surface Mount Switching Diodes Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Min. Typ. Max. Unit Reverse Breakdown Voltage (IR=100μA) V(BR)R 80 -- -- V Forward Voltage IF=100mA VF -- -- 1.2 V Reverse Current VR=80V IR -- -- 0.1 μA Capacitance between terminals VR=0.5V, f=1MHZ CT -- -- 3.0 pF Reverse Recovery Time VR=6V, IF=10mA,RL=100Ω Trr -- -- 4.0 ns Device marking PART 1SS400 Publication Order Number: [1SS400] MARK A4 © Bruckewell Technology Corporation Rev. A -2014 1SS400 Surface Mount Switching Diodes ■RATING AND CHARACTERISTIC CURVES FIG.1- FORWARD CHARACTERISTICS FIG.2- REVERSE CHARACTERISTICS FIG.3- CAPACITANCE BETWEEN TERMINALS FIG.4- REVERSE RECOVERY TIME CHARACTERISTICS FIG.5- SURGE CURRENT CHARACTERISTIC FIG.6- REVERSE RECOVERY TIME (TRR) MEASUREMENT CIRCUIT Publication Order Number: [1SS400] © Bruckewell Technology Corporation Rev. A -2014 1SS400 Surface Mount Switching Diodes Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [1SS400] © Bruckewell Technology Corporation Rev. A -2014