BAV19-21W Surface mount switching diode Features • Fast switching speed • Surface mount package ideally suited for automatic insertion • For general purpose switching applications • RoHS compliant package Mechanical Data • Surface mount fast switching diode Packing & Order Information 3,000/Reel Graphic symbol ORDERING INFORMATION Type No. Marking Package Code BAV19W A8 SOD-123 BAV20W T2 SOD-123 BAV21W T3 SOD-123 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATING @ Ta=25°C unless otherwise specified Parameter Symbol Non-Repetitive Peak Reverse Voltage VRM Peak repetitive peak reverse voltage VRRM Working peak VRWM DC Blocking voltage Publication Order Number: [BAV19-21W] BAV19W BAV20W BAV21W Unit 120 200 250 V 100 150 200 V VR © Bruckewell Technology Corporation Rev. A -2014 BAV19-21W Surface mount switching diode MAXIMUM RATING @ Ta=25°C unless otherwise specified Parameter Symbol RMS Reverse Voltage BAV19W BAV20W BAV21W Unit 71 106 141 V VR(RMS) Forward Continuous Current IFM 400 mA Average Rectified Output Current ID 200 mA IFSM 2.5 A Non-Repetitive Peak Forward Surge Current @t=1.0 μs @t=1.0 s 0.5 Repetitive Peak Forward Surge Current IFRM 625 mA Power Dissipation PD 250 mW RθJA 500 °C/W Tj,TSTG -65 to +150 °C Thermal Resistance Junction to Ambient Air Operating and Storage Temperature Rage ELECTRICAL CHARACTERISTICS @ Ta=25°C unless otherwise specified Characteristic Conditions Symbol Min Maximum Forward Voltage IF=100mA IF=200mA Reverse Current BAV19W VR=100V BAV20W VR=150V BAV21W VR=200V Junction Capacitance Reverse Recovery Time VR=0,f=1.0MHz IF=IR=30mA, Irr=0.1×IR,RL=100Ω Publication Order Number: [BAV19-21W] VF1 VF2 -- Max 1.0 1.25 Unit V IR -- 0.1 μA Cj -- 5.0 pF TRR -- 50 ns © Bruckewell Technology Corporation Rev. A -2014 BAV19-21W Surface mount switching diode ■TYPICAL CHARACTERISTICS @ Ta=25°C unless otherwise specified Publication Order Number: [BAV19-21W] © Bruckewell Technology Corporation Rev. A -2014 BAV19-21W Surface mount switching diode Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [BAV19-21W] © Bruckewell Technology Corporation Rev. A -2014