SCHOTTKY DIE SPECIFICATION Product Name: BWS-65-40-SA General Description: 65mil 40V Standard VF ELECTRICAL CHARACTERISTICS Reverse Breakdown Voltage: Ir=0.20mA Average Rectified Forward Current SYM Spec. Limit UNIT VBRM 45 Volt IFAV 5.0 Amp VF MAX 0.50 Volt IR MAX 0.100 mA IFSM 150 Amp Tj 125 ℃ TSTG -55 to +125 ℃ Maximum Instantaneous Forward Voltage @ 5 Amperes, Ta=25℃ Maximum Instantaneous Reverse Current VR= 43 Volt, Ta=25℃ MAXIMUM RATINGS Nonrepetitive Peak Surge Current Semi-Sine Wave, Duty = 8.3ms、1cycle Operating Junction Temperature Storage Temperatures 1. Specification is applied to die only. Actual performance may degrade when assembled. BW does not guarantee device performance after assembly. 2. Suggest to storage in Nitrogen cabinet, 45-60% RH, 22-26 ℃ for 6 months. 3. Data sheet information is subjected to change without notice. 4. Suggest Soldering profile (Pb92.5%,5%Sn,Ag2.5%): Soldering peak Temp. 320~350 ℃ 3~5min. DICE OUTLINE DRAWING DIM ITEM μm Mil A Die Size 1650 65.00 B Top Metal Pad Size 1450 57.08 C Thickness 280 11.00 (1)Cutting street width is around 20µm. (2)Top-side is Ti/Al and back-side metal is Ti/Ni/Ag. (3) Top-side Ti/Ni thk: 0.42um, Ag thk: 3.5um