Mechanical Specifications Part Type Information - Fair

Fair-Rite Product's Catalog
Part Data Sheet, 2744065447
Printed: 2014-06-11
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2744065447
Frequency Range: Broadband Frequencies 10-300 MHz (44 material)
Description:
44 COMMON MODE SM BEAD
Application:
Suppression Components
Where Used:
Board Component
Part Type:
SM Beads (Common-Mode)
Mechanical Specifications
Weight:
1.800
(g)
Part Type Information
Surface mount common-mode beads are available from Fair-Rite in several materials and sizes. The common-mode bead provides a common
magnetic path for the flux generated by the current to the load and the return current from the load. The current compensation results
in zero magnetic flux in the bead.
-SM Beads on 12 mm tape width are supplied taped and reeled per EIA 481 and IEC 60286-3 standards. SM Beads on 16 and 24 mm tape
widths are supplied taped and reeled per EIA 481 and IEC 60286-3 standards. Taped and reeled parts are supplied on a 13'' reel.
-SM Beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the
part number to a '6'.
-Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating.
-SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the mounting
site of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the copper strip are
not specified as solderable surfaces.
-After preheating the beads to within 100 oC of the soldering temperature, the parts meet the resistance to soldering requirements
of EIA-186-10E, temperature 260±5 oC and time 10±1 seconds.
-Suggested land patterns are in accordance with the latest revision of IPC-7351.
-SM Beads are controlled for impedance limits only. Minimum impedance values are specified for the + marked frequencies. The
minimum impedance is typically the listed value less 20%. SM Beads in 44 materials are measured for impedance on the 4193
Vector Impedance Analyzer. The 52 SM Beads are tested for impedance on the 4291A RF Impedance Analyzer.
-Recommended storage and operation temperature is -55 oC to 125 oC.
-The maximum current rating for these SM Beads is 5 amps.
-For any SM Bead requirement not listed, please contact our customer service group for availability and pricing.
-Our Surface Mount Bead Kit' (part number 0199000025) is available for prototype evaluation.
-Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled.
Fair-Rite Product's Catalog
Part Data Sheet, 2744065447
Printed: 2014-06-11
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Mechanical Specifications
Land Patterns
V
Dim
mm
A
B
C
D
E
F
G
H
J
K
5.30
7.00
14.80
2.50
3.00
-
mm
nominal inch
tol
inch
misc.
Max
Max
Max
±0.50
±0.10
-
0.209
0.275
0.582
0.098
0.118
-
Max
Max
Max
-
Electrical Specifications
Typical Impedance ( )
10 MHz
95
25 MHz+
145
100 MHz+
255
250 MHz
_
300 MHz
315
W
X
Y
Z
1.100
0.043
5.000
0.197
3.000
0.118
ref
6.800
0.268
11.800
0.465
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
24
12
-
1000
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Electrical Properties
Max Rdc(m )
4.10
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2744065447
Printed: 2014-06-11
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
See next page for further material specifications.
Fair-Rite Product's Catalog
Part Data Sheet, 2744065447
Printed: 2014-06-11
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2744065447
Printed: 2014-06-11
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com