Fair-Rite Product's Catalog Part Data Sheet, 2506031217Y0 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2506031217Y0 Frequency Range: Low Current Description: MULTI-LAYER CHIP BEAD Application: Suppression Components Where Used: Board Component Part Type: Chip Beads Mechanical Specifications Weight: .006 (g) Part Type Information Fair-Rite offers a broad selection of cost effective multi-layer chip beads to suppress conducted EMI signals. Chip beads can be used in an array of devices such as cellular phones, computers, laptops, pagers, etc. The small package sizes accommodate automated placements and allow for a dense packaging of circuit boards. Chip beads are 100% tested for impedance and dc resistance. They are available in standard, high and GHz signal speeds. The multi-layer chip beads are organized by increasing package size and current carrying capacity. -All multi-layer chip beads are supplied taped and reeled, if required bulk packed chip beads can be provided. -The impedance values listed are typical values. The nominal impedance with a ± 25% tolerance is specified for the + marked 100 MHz. Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A. -Chip beads have plated contacts, 100% matte tin over a nickel undercoating. They can accommodate both reflow and wave soldering technologies. -The suggested land patterns are in accordance to the latest revision of IPC-7351. -Recommended storage and operating temperature range is -55°C to 125°C. -Our 'Chip Bead Kit' (part number 0199000018) is available for prototype evaluation. Fair-Rite Product's Catalog Part Data Sheet, 2506031217Y0 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.80 0.80 1.60 0.40 - mm nominal inch tol inch misc. ±0.15 ±0.15 ±0.15 ±0.20 - 0.031 0.031 0.063 0.016 - - Electrical Specifications Typical Impedance ( ) 50 MHz 90 100 MHz+ 120 ±25% 500 MHz 179 1000 MHz+ - Electrical Properties Signal Speed Standard Max DCR ( ) 0.15 Max Current (mA) 400 W X Y Z 1.000 0.039 1.100 0.043 - ref 0.600 0.024 1.700 0.067 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0603 (1608) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2506031217Y0 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com