Mechanical Specifications Part Type Information - Fair

Fair-Rite Product's Catalog
Part Data Sheet, 9677001015
Printed: 2015-02-12
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
9677001015
Frequency Range: Power Applications
Description:
77 BOBBIN GROUND
Application:
Inductive Components
Where Used:
Open Magnetic Circuit
Part Type:
Bobbins
Mechanical Specifications
Weight:
6.700
(g)
Part Type Information
Bobbins are an economical and well-proven core design for many applications where relatively low but stable inductance
values are required.
-For higher frequency designs, use small bobbins in 43 material.
-For power applications, bobbins in 77 material are specified for AL and dc bias limits.
-Bobbins in Figures 2-5 can be supplied with a uniform coating of thermo-set plastic coating which can withstand a
minimum breakdown of 500Vrms. This coating will change the dimensions a maximum of 0.5mm (.020''). The last digit of
the thermo-set plastic coated part is an '8'.
-The listed dimensions are for assembled bobbins without thermo-set plastic.
-Bobbins are tested for AL value at 1kHz < 10 gauss.
-For any bobbin requirement not listed in the catalog, please contact our customer service group for availability and
pricing.
-Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 8 = coated bobbin.
Fair-Rite Product's Catalog
Part Data Sheet, 9677001015
Printed: 2015-02-12
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Mechanical Specifications
Land Patterns
V
Dim
mm
A
B
C
D
E
F
G
H
J
K
9.55
19.00
12.70
4.65
1.00
1.03
-
mm
nominal inch
tol
inch
misc.
-0.15
±0.70
±0.15
+0.20
+0.25
+0.10
-
0.373
0.750
0.500
0.187
0.045
0.043
-
-
Electrical Specifications
Typical Impedance ( )
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
Electrical Properties
(-)
AL (nH)
39 ±10%
ALmin. @ Nl (At)
33 - 125
N/AWG
75/24
# Holes
# Rows
0.3
-
-
Aw
(cm2)
Connector Plate
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 9677001015
Printed: 2015-02-12
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
See next page for further material specifications.
Fair-Rite Product's Catalog
Part Data Sheet, 9677001015
Printed: 2015-02-12
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 9677001015
Printed: 2015-02-12
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com