Fair-Rite Product's Catalog Part Data Sheet, 2506033007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Application: Suppression Components Where Used: Board Component Part Type: Chip Beads Fair-Rite Product's Catalog Part Data Sheet, 2506033007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Frequency Range: Medium Current Application: Suppression Components Where Used: Board Component Part Type: Chip Beads Part Type Information Fair-Rite offers a broad selection of cost effective multi-layer chip beads to suppress conducted EMI signals. Chip beads can be used in an array of devices such as cellular phones, computers, laptops, pagers, etc. The small package sizes accommodate automated placements and allow for a dense packaging of circuit boards. Chip beads are 100% tested for impedance and dc resistance. They are available in standard, high and GHz signal speeds. The multi-layer chip beads are organized by increasing package size and current carrying capacity. -All multi-layer chip beads are supplied taped and reeled, if required bulk packed chip beads can be provided. -The impedance values listed are typical values. The nominal impedance with a ± 25% tolerance is specified for the + marked 100 MHz. Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A. -Chip beads have plated contacts, 100% matte tin over a nickel undercoating. They can accommodate both reflow and wave soldering technologies. -The suggested land patterns are in accordance to the latest revision of IPC-7351. -Recommended storage and operating temperature range is -55°C to 125°C. -Our 'Chip Bead Kit' (part number 0199000018) is available for prototype evaluation. Fair-Rite Product's Catalog Part Data Sheet, 2506033007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2506033007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .006 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.80 0.80 1.60 0.40 - mm nominal inch tol inch misc. ±0.15 ±0.15 ±0.15 ±0.20 - 0.031 0.031 0.063 0.016 - - Electrical Specifications Typical Impedance ( ) 50 MHz 23 100 MHz+ 30 ±25% 500 MHz 40 1000 MHz 41 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 1.000 0.039 1.100 0.043 - ref 0.600 0.024 1.700 0.067 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0603 (1608) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2506033007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2506036007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2506036007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .006 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.80 0.80 1.60 0.40 - mm nominal inch tol inch misc. ±0.15 ±0.15 ±0.15 ±0.20 - 0.031 0.031 0.063 0.016 - - Electrical Specifications Typical Impedance ( ) 50 MHz 48 100 MHz+ 60 ±25% 500 MHz 84 1000 MHz 81 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 1.000 0.039 1.100 0.043 - ref 0.600 0.024 1.700 0.067 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0603 (1608) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2506036007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2506031217Y2 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2506031217Y2 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .006 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.80 0.80 1.60 0.40 - mm nominal inch tol inch misc. ±0.15 ±0.15 ±0.15 ±0.20 - 0.031 0.031 0.063 0.016 - - Electrical Specifications Typical Impedance ( ) 50 MHz 90 100 MHz+ 120 ±25% 500 MHz 170 1000 MHz 152 Electrical Properties Signal Speed Standard Max DCR ( ) 0.05 Max Current (mA) 2000 W X Y Z 1.000 0.039 1.100 0.043 - ref 0.600 0.024 1.700 0.067 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0603 (1608) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2506031217Y2 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508053007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508053007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 23 100 MHz+ 30 ±25% 500 MHz 41 1000 MHz 41 Electrical Properties Signal Speed Standard Max DCR ( ) 0.03 Max Current (mA) 3000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508053007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508056007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508056007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 49 100 MHz+ 60 ±25% 500 MHz 84 1000 MHz 84 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508056007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508051217Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508051217Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 91 100 MHz+ 120 ±25% 500 MHz 165 1000 MHz 135 Electrical Properties Signal Speed Standard Max DCR ( ) 0.05 Max Current (mA) 3000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508051217Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508053017Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508053017Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 239 100 MHz+ 300 ±25% 500 MHz 218 1000 MHz 117 Electrical Properties Signal Speed Standard Max DCR ( ) 0.05 Max Current (mA) 3000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508053017Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508056017Y2 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508056017Y2 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 449 100 MHz+ 600 ±25% 500 MHz 293 1000 MHz 159 Electrical Properties Signal Speed Standard Max DCR ( ) 0.10 Max Current (mA) 2000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508056017Y2 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508051027Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508051027Y1 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 764 100 MHz+ 1000 ±25% 500 MHz 402 1000 MHz 216 Electrical Properties Signal Speed Standard Max DCR ( ) 0.30 Max Current (mA) 1000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508051027Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2508052027Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2508052027Y1 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .010 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 0.90 1.25 2.00 0.50 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.035 0.049 0.079 0.020 - - Electrical Specifications Typical Impedance ( ) 50 MHz 599 100 MHz+ 2000 ±25% 500 MHz 350 1000 MHz 189 Electrical Properties Signal Speed Standard Max DCR ( ) 0.30 Max Current (mA) 1000 W X Y Z 1.500 0.059 1.300 0.051 - ref 0.600 0.024 1.900 0.075 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 4000 10000 - Package Size Pkg Size 0805 (2012) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2508052027Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512063007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512063007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 24 100 MHz+ 30 ±25% 500 MHz 40 1000 MHz 38 Electrical Properties Signal Speed Standard Max DCR ( ) 0.03 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512063007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512065007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512065007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 39 100 MHz+ 50 ±25% 500 MHz 69 1000 MHz 70 Electrical Properties Signal Speed Standard Max DCR ( ) 0.03 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512065007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512067007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512067007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 53 100 MHz+ 70 ±25% 500 MHz 102 1000 MHz 103 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512067007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512061517Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512061517Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 120 100 MHz+ 150 ±25% 500 MHz 173 1000 MHz 130 Electrical Properties Signal Speed Standard Max DCR ( ) 0.05 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512061517Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512063017Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512063017Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 212 100 MHz+ 300 ±25% 500 MHz 150 1000 MHz 88 Electrical Properties Signal Speed Standard Max DCR ( ) 0.06 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512063017Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512066017Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512066017Y1 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 460 100 MHz+ 600 ±25% 500 MHz 260 1000 MHz 120 Electrical Properties Signal Speed Standard Max DCR ( ) 0.08 Max Current (mA) 1000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512066017Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2512061027Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2512061027Y1 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .030 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.10 1.60 3.20 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.043 0.063 0.126 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 925 100 MHz+ 1000 ±25% 500 MHz 210 1000 MHz 117 Electrical Properties Signal Speed Standard Max DCR ( ) 0.30 Max Current (mA) 1000 W X Y Z 1.800 0.071 1.600 0.063 - ref 1.200 0.047 2.800 0.110 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 8 4 3000 10000 - Package Size Pkg Size 1206 (3216) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2512061027Y1 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2518066007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2518066007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .060 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.60 1.60 4.50 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.063 0.063 0.177 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 44 100 MHz+ 60 ±25% 500 MHz 91 1000 MHz 94 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.900 0.075 - ref 2.000 0.079 3.900 0.154 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 12 8 2000 10000 - Package Size Pkg Size 1806 (4516) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2518066007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2518068007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2518068007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .060 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.60 1.60 4.50 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.063 0.063 0.177 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 64 100 MHz+ 80 ±25% 500 MHz 114 1000 MHz 114 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 1.800 0.071 1.900 0.075 - ref 2.000 0.079 3.900 0.154 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 12 8 2000 10000 - Package Size Pkg Size 1806 (4516) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2518068007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2518127007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2518127007Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .090 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.50 3.20 4.50 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.063 0.126 0.177 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 54 100 MHz+ 70 ±25% 500 MHz 96 1000 MHz 96 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 3.400 0.134 1.900 0.075 - ref 2.000 0.079 3.900 0.154 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 12 8 1000 5000 - Package Size Pkg Size 1812 (4532) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2518127007Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Fair-Rite Product's Catalog Part Data Sheet, 2518121217Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 2518121217Y3 Description: MULTI-LAYER CHIP BEAD Preferred Part: Weight: .090 (g) Mechanical Specifications Land Patterns V Dim A B C D E F G H J K mm 1.50 3.20 4.50 0.70 - mm nominal inch tol inch misc. ±0.20 ±0.20 ±0.20 ±0.30 - 0.063 0.126 0.177 0.028 - - Electrical Specifications Typical Impedance ( ) 50 MHz 92 100 MHz+ 120 ±25% 500 MHz 150 1000 MHz 106 Electrical Properties Signal Speed Standard Max DCR ( ) 0.04 Max Current (mA) 3000 W X Y Z 3.400 0.134 1.900 0.075 - ref 2.000 0.079 3.900 0.154 Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel 12 8 1000 5000 - Package Size Pkg Size 1812 (4532) Connector Plate # Holes # Rows - - Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 2518121217Y3 Printed: 2015-01-05 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com