RAIO TECHNOLOGY INC. 7F, No.19-1, Industry East 4th Road, Hsinchu Science Park, Hsinchu, Taiwan, R.O.C. TEL：886-3-5637888 FAX：886-3-5637666 RA8835 Dot Matrix LCD Controller RoHS Test Report Testing House : Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan Measurement Date : May 05, 2009 Part Manufacturer : RAIO TECHNOLOGY INC. 7F, No.19-1, Industry East 4th Road, Hsinchu Science Park, Hsinchu, Taiwan TEL：886-3-5637888 FAX：886-3-5637666 宜特科技股份有限公司 Integrated Service Technology Logging No.：QA9800155 Report No. ：TR9800697 Report Date：2009/05/08 Total Pages ： 2 Of 7 Test Report MDL Test Item Sample Pretreatment Method Pb Modified from SW-846 of US EPA 3052 acidic digestion procedurce by using microwave digestion system. YES NIEA M104.01C (ICP-OES) 1.65 N.D. Cd Modified from SW-846 of US EPA 3052 acidic digestion procedurce by using microwave digestion system. YES NIEA M104.01C (ICP-OES) 0.55 N.D. Hg Modified from SW-846 of US EPA 3052 acidic digestion procedurce by using microwave digestion system. YES NIEA M104.01C (ICP-OES) 1.37 N.D. Cr6+ Modified from IEC 62321:2008 - UV-VIS 0.86 N.D. Totally Dissolved Analytical Method Remark: 1. N.D. means that the quantitation was below the detection limit. Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan 宜特科技股份有限公司 300 新竹市埔頂路 31 號 1 樓 Tel: 886-3-5782266 Fax: 886-3-5785205 Result (Method Detection Limit, mg/kg, ppm) (mg/kg, ppm) 宜特科技股份有限公司 Integrated Service Technology Logging No.：QA9800155 Report No. ：TR9800697 Report Date：2009/05/08 Total Pages ： 3 Of 7 Test Report Test Item Sample Pretreatment Method Totally Dissolved Analytical Method MDL Result (Method Detection Limit,mg/kg, ppm) (mg/kg, ppm) Monobromobiphenyl 2.31 N.D. Dibromobiphenyl 2.57 N.D. Tribromobiphenyl 2.62 N.D. Tetrabromobipheny 2.12 N.D. 2.04 N.D. 2.40 N.D. Heptabromobiphenyl 3.04 N.D. Octabromobiphenyl 3.70 N.D. Nonabromobiphenyl 3.56 N.D. Decabromobiphenyl 3.59 N.D. Adopted by Pentabromobiphenyl Modified from IEC 62321:2008 - Hexabromobiphenyl US EPA 8000B (GC) Remark： 1. N.D. means that the quantitation was below the detection limit. Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan 宜特科技股份有限公司 300 新竹市埔頂路 31 號 1 樓 Tel: 886-3-5782266 Fax: 886-3-5785205 宜特科技股份有限公司 Integrated Service Technology Test Report Test Item Sample Pretreatment Method Totally Dissolved Analytical Method Logging No.：QA9800155 Report No. ：TR9800697 Report Date：2009/05/08 Total Pages ： 4 Of 7 MDL Result (Method Detection Limit,mg/kg, ppm) (mg/kg, ppm) Monobromodiphenyl ether 2.21 N.D. Dibromodiphenyl ether 2.17 N.D. Tribromodiphenyl ether 2.25 N.D. Tetrabromodipheny ether 1.88 N.D. 2.02 N.D. 2.29 N.D. Heptabromodiphenyl ether 2.49 N.D. Octabromodiphenyl ether 2.86 N.D. Nonabromodiphenyl ether 3.15 N.D. Decabromodiphenyl ether 3.26 N.D. Adopted by Pentabromodiphenyl ether Modified from IEC 62321:2008 - Hexabromodiphenyl ether US EPA 8000B (GC) Remark： 1. N.D. means that the quantitation was below the detection limit. Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan 宜特科技股份有限公司 300 新竹市埔頂路 31 號 1 樓 Tel: 886-3-5782266 Fax: 886-3-5785205 宜特科技股份有限公司 Integrated Service Technology Logging No.：QA9800155 Report No. ：TR9800697 Report Date：2009/05/08 Total Pages ： 5 Of 7 TR9800697 Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan 宜特科技股份有限公司 300 新竹市埔頂路 31 號 1 樓 Tel: 886-3-5782266 Fax: 886-3-5785205 宜特科技股份有限公司 Integrated Service Technology Logging No.：QA9800155 Report No. ：TR9800697 Report Date：2009/05/08 Total Pages ： 6 Of 7 Measurement Flowchart-US EPA 3052 1. Weigh approximately testing sample. 2. Add the mixture of hydrofluoric acid and nitric acid into a digestion vessel until all mixture reacted with sample for a while. 3. Cover and tight the digestion vessel. 4. Place the sample into the microwave system until sample was totally digested. 5. After digestion, cooling the extract at room temperature then dilute cautiously with distilled water. 6. Filtrate the digestive solution. 7. Add distilled water into volumetric flask to make-up the line of volumetric flask. 8. Analyzed by Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). Measurement Flowchart- IEC 62321 Method for determination of Cr (Vl) in polymers and electronics by colorimetric method 1. Add digestion solution, MgCl2, and Phosphate buffer solution into each of sample. 2. Stir and heat the samples on the hot plate. 3. Cooling the sample, and then filter the sample by 0.45um membrane filter. 4. Add Nitric Acid solution, Diphenylcarbazide solution and Sulfuric Acid solution. 5. Stand the sample 5~10 mins for full color development. 6. Analyzed the sample by UV-VIS Photometer at 540nm wavelength. Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan 宜特科技股份有限公司 300 新竹市埔頂路 31 號 1 樓 Tel: 886-3-5782266 Fax: 886-3-5785205 宜特科技股份有限公司 Integrated Service Technology Logging No.：QA9800155 Report No. ：TR9800697 Report Date：2009/05/08 Total Pages ： 7 Of 7 Measurement Flowchart - IEC 62321 Method for determination of PBBs and PBDEs in polymers 1. Weigh appropriately sample to thimble filter tube. 2. Add organic solvent to each sample and mix it. 3. Extraction all sample by Automated Soxhlet equipment for 2 hrs. 4. After cooling, concentrated sample by rotary evaporation with Nitrogen gas (N2) until dryness. 5. Re-dissolve the extract with organic solvent. 6. Filter the extract through 0.45 µm Teflon membrane and collect filtrate in a 5 mL volumetric flask. 7. Make to volume with organic solvent and add PCB-206 as internal standard. 8. Transfer sample of 2 mL into sample vial and analyzed by GC-MS. Integrated Service Technology 1F, No.31, Pu-Ding Rd., Hsinchu, Taiwan 宜特科技股份有限公司 300 新竹市埔頂路 31 號 1 樓 Tel: 886-3-5782266 Fax: 886-3-5785205