125 Series HWT Output Inductors

TM
HWT
125 Series
Output Inductors
• Energy Storage Capacity: 6-10 mJ
Specifications
MIX 8 G0
MIX 52 G2
MIX 52 G1
MIX 52 G0
SCHOTT
P/N
L, µH
0 ADC
SCHOTT
P/N
L, µH
0 ADC
SCHOTT
P/N
L, µH
0 ADC
SCHOTT
P/N
L, µH
0 ADC
RATED
CURRENT
AMPS DC
DCR
mOHM
REF
# COILS
33589
1.22
33609
1.29
33629
1.76
33649
2.98
112
0.33
3
33590
1.75
33610
1.85
33630
2.53
33650
4.3
95.9
0.43
2
33591
2.39
33611
2.52
33631
3.45
33651
5.85
82.3
0.57
2
33592
3.12
33612
3.3
33632
4.51
33652
7.64
71.2
0.74
2
33593
3.94
33613
4.17
33633
5.7
33653
9.67
62.7
0.94
2
33594
4.87
33614
5.15
33634
7.04
33654
11.9
55.8
1.2
2
33595
5.89
33615
6.23
33635
8.52
33655
14.4
50.2
1.4
2
33596
7.01
33616
7.42
33636
10.1
33656
17.2
48.5
1.5
1
33597
8.23
33617
8.7
33637
11.9
33657
20.2
45.0
1.7
1
33598
9.55
33618
10.1
33638
13.8
33658
23.4
41.7
2.0
1
33599
11.0
33619
11.6
33639
15.8
33659
26.9
38.8
2.3
1
33600
12.5
33620
13.2
33640
18.0
33660
30.6
36.1
2.6
1
33601
15.8
33621
16.7
33641
22.8
33661
38.7
31.8
3.4
1
33602
19.5
33622
20.6
33642
28.2
33662
47.7
28.4
4.2
1
33603
23.6
33623
24.9
33643
34.1
33663
57.8
25.5
5.2
1
33604
28.1
33624
29.7
33644
40.6
33664
68.7
23.0
6.3
1
33605
32.9
33625
34.8
33645
47.6
33665
80.7
21.1
7.5
1
33606
38.2
33626
40.4
33646
55.2
33666
93.6
19.4
8.8
1
33607
43.8
33627
46.4
33647
63.4
33667
107
17.8
10.3
1
33608
49.9
33628
52.7
33648
72.1
33668
122
16.5
12.0
1
Parts availability subject to Schott manufacturing schedules and leadtimes. Not all parts available from stock.
Please contact us for more details and availability. The Adobe Acrobat Reader is required to view these linked documents.
Electrical Specifications Test Criteria
1. Inductance tolerances at zero DC current are ±10% for G2 designs, ± 12% for G0 and G1 designs.
2. Inductances shown are at zero DC current. See inductance vs. bias curves for inductances with DC current.
3. Temperature rise is approximately 60°C at rated DC current.
4. Multiple coil units are rated with all coils parallel connected.
5. Parts are 100% tested for inductance and hipot (1000 Vrms).
All data is believed to be accurate at time of printing. Schott Corporation reserves the right to make changes without notification.
“Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder.
© 2001 Schott Corporation
1000 Parkers Lake Road, Wayzata, Minnesota 55391 U.S.A.
Tel: + (952) 475-1173
Fax: + (952) 475-1786
Email: [email protected]
Web: http://www.schottcorp.com
Standard Configuration
125 SERIES
INDUCTANCE vs DC CURRENT
TYPICAL
100
Percent of Zero DC Inductance
80
1
2
60
3
40
1 - MIX 52 GAP-G2
2 - MIX 8 GAP-G0
3 - MIX 52 GAP-G1
4 - MIX 52 GAP-G0
4
20
0
0
20
40
60
80
100
120
140
160
180
200
Percent of Rated Current
1.01
MAX
2.00
MIN
.24 REF
1.31
MAX
84 REF
1.31
MAX
.90 REF
All statements and technical information contained herein are believed to be accurate, but the accuracy and completeness thereof is not guaranteed.
If any product is found to be defective, Schott Corporation’s (Seller) only obligation shall be to replace such quantity of the product proved to be
defective. User shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection
herewith. Seller shall not be liable for any direct, consequential, or incidental loss or damage. Conditions not specifically stated herein shall be
governed by established trade customs. Schott Corporation reserves the right to makes changes without notification. “Schott” is a trade name of
Schott Corporation. All other trademarks and trade names are the property of their respective holder.
©2001 Schott Corporation
Schott Corporation
1000 Parkers Lake Road
Wayzata, Minnesota 55391
U.S.A.
Tel: + (952) 475-1173
Fax: + (952) 475-1786
Email: [email protected]
Web: http://www.schottcorp.com