Features: Meet Performance Requirements of JSS Std. & MIL Std. Miniature Size available for space savings. Available ranges from 10 ohm to 1M ohm. Values below range available on request. Flameproof Coating Available on request. TCR available 25,50,100ppm/°C. DIMENSION (mm) H (min) D TYPE POWER RATING TOL (±) L RMF125 0.125W 1%,2%,5% 3.3 ±0.5 1.7 ±0.2 28 RMFS40 0.4W 1% 3.3 ±0.5 1.7 ±0.2 28 RMF25 0.25W 1%,2%,5% 6.5 ±0.5 2.3 ±0.2 25 RMFS60 0.6W 1% 6.5 ±0.5 2.3 ±0.2 25 RMF50 0.5W 1%,2%,5% 9.5 ±1 3.5 ±0.5 25 RMFS100 1W 1%,5% 9.5 ±1 3.5 ±0.5 25 RMF100 1W 1%,5% 12 ±1 4.5 ±0.5 25 RMFS200 2W 1%,5% 12 ±1 4.5 ±0.5 25 d 0.45 ±0.05 0.45 ±0.05 0.60 ±0.05 0.60 ±0.05 0.60 ±0.05 0.60 ±0.05 0.80 ±0.05 0.80 ±0.05 Max. Working Voltage Max. Overload Voltage 200V 400V 200V 400V 250V 500V 250V 500V 350V 700V 350V 700V 500V 1000V 500V 1000V Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com [email protected] Fax: (626) 284-1704 TEST Dielectric Withstanding Voltage Insulation Resistance Temp Cycling Short Time Overload Damp Heat Steady State Load Life Robustness of Terminations Resistance to Soldering Heat PROCEDURE V - Block Method, 3X Rated Voltage Duration: 1min. V - Block Method, DC 500V Duration: 1min. 5 cycles of -65°C, 25°C,155°C, 25°C 2.5 X Rated Voltage Duration: 5 seconds 40°C 95% relative humidity, Duration: 56 Days Rated Voltage at 70°C ambient Duration: 2000 hours Tensile: 10N Duration: 10 sec. Bending: 180°, > 3 bends Torsion: 3 rotation of 360° each Temp. 260°C ± 5°C Duration: 10 seconds SPEC. R = (0.25% + 0.05 ohm) > 10,000 M ohm R = (1% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (1% + 0.05 ohm) R = (1% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (0.25% + 0.05 ohm) Shock (Medium Impact) 1 Km/S2 R = (0.25% + 0.05 ohm) Vibration (High Frequency) 10 to 2000Hz: m/S2 R = (0.25% + 0.05 ohm) Low Temp. Exposure High Temp. Exposure Solderability Resistance to Solvent at -65°C Duration: 2 Hrs at +155°C Duration: 16 Hrs. No Load Condition Dip Method, Solder bath Temp. 230°C ± 5°C. Duration: 5 sec. Solvent: Trichloroethylene Duration: 3 min. R = (0.25% + 0.05 ohm) R = (1% + 0.05 ohm) 95% coverage Marking should be legible Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com [email protected] Fax: (626) 284-1704