Leading Resistor Supplier to Oil & Gas Market High

Leading Resistor Supplier to Oil & Gas Market
High Temperature Resistors
Riedon is a major supplier to Oil & Gas electronics equipment
manufacturers and independent design firms engaged oil & gas
instrumentations.
High pressures and high temperatures will continue to push the
limits of existing technology. In order to meet the demand of
future requirements, designers will need to work closely with
technology suppliers to craft solutions capable of operation in
extreme environments. Our customers look to us for answers. At
Riedon, we leverage our knowledge and experience to create
solutions fueling next generation designs.
Formation sampling and well completion disciplines are
constantly being improved, as the intelligence of the drill bit,
tool string and monitoring gauge continue to increase. Therefore
customers demand more form passive components to meet
higher requirements. Down hole tool design and development
require both mechanical and electrical technologies capable of
operation in extreme environments above 200⁰C and pressures
greater than 30K psi.
The following page list our product offering for this market.
Riedon Offers:



Custom Designed Solutions
Wide Range of Resistor
Technology
Quick Delivery
Oil & Gas Applications:

Down Hole Robotics

Wellhead monitoring
systems

Well Drilling

Underground Pressure
Monitoring

Fluid handling

High Temperature Probes
Riedon High Temperature Resistor selection for Oil & Gas market:








Resistance from 0.02 to 260k Ohms
Excellent Pulse Handling
High Temperature: -55⁰C to 275⁰C
Resistance Tolerances to ±0.01%
Power Rating 0.1 to 13 Watts
Low TCR: ±20ppm/K Standard
Non-Inductive Windings Available
MIL-R-26 / MIL-R-39007 Power Ratings
Wirewound Precision







Resistance to 6 MOhms
Tolerances to 0.005%
High Temperature: -55⁰C to 250⁰C
100% Acceptance Tested
Traceable to NIST
Low TCR down to ±2 ppm/K
Long Term Stability
CHR








Resistance from 1 to 10M Ohms
Power Rating from 0.05 to 1W
Resistance Tolerances to ±1%
TCRs to ±50ppm/K
Non-magnetic (PtAg)
Suitable for Glueing or Soldering
Sizes 0402, 0504, 0603, 0805, 1206
Special HT Version up to 300⁰C
HVS








Resistance from 100k to 10T Ohms
Power Rating to 0.05 to 1.5 Watts
Resistance Tolerances to ±1%
TCRs to ±25ppm/K
Non-magnetic (PtAg)
High Value Thick Film Resistance Element
Sizes: 0805, 1206, 1210, 2512, 4020
Special HT Version up to 300⁰C
Wirewound Power