GAS GENERATOR SET MTU 10V0183 GS350

GAS GENERATOR SET
MTU 10V0183 GS350
300 kWe /60 Hz /Prime
208 - 600V
Reference MTU 10V0183 GS350 (350 kWe) for Standby Rating Technical Data
SYSTEM RATINGS
Prime
Voltage (L-L)
Phase
PF
Hz
Natural Gas
Ratings: Amps
Natural Gas
Ratings: kW/kVA
[email protected]%
Voltage Dip
Generator Model
Temp Rise
Connection
240V**
1
1
60
208V**
3
0.8
60
240V**
3
0.8
60
480V**
3
0.8
60
600V**
3
0.8
60
1250
1041
902
451
361
300/300
300/375
300/375
300/375
300/375
700
573RSL4035
105 °C/40 °C
12 LEAD ZIG-ZAG
959
433CSL6220
105 °C/40 °C
12 LEAD LOW WYE
959
433CSL6220
105 °C/40 °C
12 LEAD HI DELTA
1277
433CSL6220
105 °C/40 °C
12 LEAD HI WYE
1100
433PSL6248
105 °C/40 °C
4 LEAD WYE
** UL 2200 Offered
CERTIFICATIONS AND STANDARDS
// Generator set is designed and manufactured
in facilities certified to standards ISO 9001:2008 and
ISO 14001:2004
// UL 2200 / CSA – Optional
– UL 2200 Listed
– CSA Certified
// Performance Assurance Certification (PAC)
- Generator Set Tested to ISO 8528-5 for Transient Response
- Verified product design, quality and performance integrity
- All engine systems are prototype and factory tested
// Power Rating
- Accepts Rated Load in One Step Per NFPA 110
2
/ // /
MTU 10V0183 GS350 (300 kWe) - Prime
STANDARD FEATURES*
MTU Onsite Energy is a single source supplier
Global Product Support
2 Year Standard Warranty
18.3 L Turbo Engine Charge Air Cooling
- 18.3 Liter Displacement
- 4-Cycle
// 3-Way Catalyst
// Engine-generator resilient mounted
// Complete Range of Accessories
// // // // Generator
- Brushless, Rotating Field Generator
- 2/3 Pitch Windings
- 300% Short Circuit Capability with PMG
○ PMG Standard for 570 frame and larger
○ PMG Optional for 430 frame and smaller
// Digital Control Panel(s)
- UL Recognized, CSA Certified, NFPA 110
- Complete System Metering
- LCD Display
// Cooling System
- Integral Set-Mounted
- Engine Driven Fan
// STANDARD EQUIPMENT*
// Engine
Air Cleaner
Oil Pump
Oil Drain Extension & S/O Valve
Full Flow Oil Filter
Jacket Water Pump
Thermostats
Blower Fan & Fan Drive
Radiator - Unit Mounted
Electric Starting Motor - 24V
Governor – Electronic Isochronous
Base - Formed Steel
SAE Flywheel & Bell Housing
Charging Alternator - 24V
Battery Box & Cables
Flexible Fuel Connectors
Flexible Exhaust Connection
EPA Certified Engine
// Generator
NEMA MG1, IEEE and ANSI standards compliance for temperature rise
and motor starting
Sustained short circuit current of up to 300% of the rated current for
up to 10 seconds (with PMG only)
Self Ventilated and Drip-proof
Superior Voltage Waveform
Solid State, Volts-per-hertz Regulator (Digital when PMG is Standard)
±1% Voltage Regulation No Load to Full Load
Brushless Alternator with Brushless Pilot Exciter
4 pole, Rotating Field
105 °C Maximum Prime Temperature Rise
1 Bearing, Sealed
Flexible Coupling
Full Amortisseur Windings
125% Rotor Balancing
3-phase Voltage Sensing
100% of Rated Load - One Step
5% Maximum Total Harmonic Distortion
// Digital Control Panel(s)
Digital Metering
Engine Parameters
Generator Protection Functions
Engine Protection
SAE J1939 Engine ECU Communications
Windows®-Based Software
Multilingual Capability
Remote Communications to RDP-110 Remote Annunciator
Programmable Input and Output Contacts
UL Recognized, CSA Certified, CE Approved
Event Recording
IP 54 Front Panel Rating with Integrated Gasket
NFPA110 Compatible
* Represents standard product only. Consult Factory/MTU Onsite Energy Distributor for additional configurations.
3
/ // /
MTU 10V0183 GS350 (300 kWe) - Prime
APPLICATION DATA
// Engine
Manufacturer
Model
Type
Arrangement
Displacement: L (in3)
Bore: cm (in)
Stroke: cm (in)
Compression Ratio
Rated RPM
Engine Governor
Maximum Power (NG): kWm (bhp)
Speed Regulation
Air Cleaner
// // Doosan
18.3L CAC
4-Cycle
10-V
18.3 (1,115)
12.8 (5.04)
14.2 (5.59)
10.5:1
1,800
Bosch
340 (456)
±0.5%
Dry
Liquid Capacity (Lubrication)
Total Oil System: L (gal)
Engine Jacket Water Capacity: L (gal)
System Coolant Capacity: L (gal)
42.1 (11.1)
50 (11)
289 (63.5)
At 100% of Power Rating: m3/hr (ft3/hr)
At 75% of Power Rating: m3/hr (ft3/hr)
At 50% of Power Rating: m3/hr (ft3/hr)
// Electrical
Electric Volts DC
Cold Cranking Amps Under -17.8 °C (0 °F)
// 24
1,050
Fuel Inlet
Fuel Supply Connection Size
Fuel Supply Pressure: mm H20 (in. H20)
3” NPT
178–279 (7–11)
92 (3,247.5)
71.5 (2,524.8)
51.9 (1,831.7)
Cooling - Radiator System
Ambient Capacity of Radiator: °C (°F)
Maximum Restriction of Cooling Air, Intake,
and Discharge Side of Rad.: kPa (in. H20)
Water Pump Capacity: L/min (gpm)
Heat Rejection to Coolant: kW (BTUM)
Heat Radiated to Ambient: kW (BTUM)
Fan Power: kW (hp)
50 (122)*
0.12 (0.5)
660 (174)
365 (20,784)
88.5 (5,030)
20.9 (28)
* Installation of enclosures reduces the ambient capacity of the cooling
system by 1 °C (1.8 °F). Gravity exhaust louvers reduce ambient
capacity of the cooling system by an additional 3 °C (5.5 °F).
// // Fuel Consumption (NG-1000 BTU/ft3)
Air Requirements
Aspirating: *m3/min (SCFM)
Air Flow Required for Rad.
Cooled Unit: **m3/min (SCFM)
Remote Cooled Applications;
Air Flow Required for Dissipation
of Radiated Gen-set Heat for a
Max of 25 °F Rise: *m3/min (SCFM)
19.4 (664)
1,019 (36,000)
321 (11,350)
* Air density = 1.184 kg/m (0.0739 lbm/ft )
** At 0.25 kPa (1 in. H20) static pressure and 52 °C (125 °F) at radiator
3
// 3
Exhaust System
Gas Temp. (Stack): °C (°F)
Gas Volume at Stack
Temp: m3/min (CFM)
Maximum Allowable
Back Pressure: kPa (in. H20)
607 (1,125)
58.6 (2,070)
2.5 (10.25)
4
/ // /
MTU 10V0183 GS350 (300 kWe) - Prime
WEIGHTS AND DIMENSIONS
Drawing above for illustration purposes only, based on standard open power 480 volt generator set. Lengths may vary with other voltages. Do not use for installation design.
See website for unit specific template drawings.
System
Open Power Unit (OPU)
Dimensions (L x W x H)
4,369 x 2,506 x 2,413 mm (172 x 98.63 x 95 in)
Weight (dry)
4,741 kg (10,452 lb)
SOUND DATA
Unit Type
Level 0: Open Power Unit dB(A)
Prime Full Load (NG)
84.7
Prime Full Load (LP)
C/F
Sound data is provided at 7 m (23 ft). Generator set tested in accordance with ISO 8528-10 and with infinite exhaust.
EMISSIONS DATA
Fuel Type
Natural Gas
THC + NOx
0.59
RATING DEFINITIONS AND CONDITIONS
CO
0.21
All units are in g/hp-hr and are EPA weighted cycle values.
Emission levels of the engine may vary with ambient
temperature, barometric pressure, humidity, fuel type and
quality, installation parameters, measuring instrumentation, etc.
The data was obtained in compliance with US EPA regulations.
C/F = Consult Factory/MTU Onsite Energy Distributor
N/A = Not Available
MTU Onsite Energy
A Rolls-Royce Power Systems Brand
www.mtuonsiteenergy.com
Ambient capability factor at 984 ft (300 m). Consult your
local MTU Onsite Energy Power Generation Distributor for
other altitudes.
// Prime power ratings apply to installations where utility power
is unavailable or unreliable. At varying load, the number of
generator set operating hours is unlimited. A 10% overload
capacity is available for one hour in twelve. Ratings are in
accordance with ISO-8528/1, ISO-3046/1, BS 5514, and
AS 2789. Average load factor: ≤ 75%. For limited running
time and base load ratings, consult the factory.
// Deration Factor:
Production tolerances in engines and installed components
can account for power variations. Altitude, temperature and
excessive exhaust and intake restrictions should be applied
to power calculations. Consult your local MTU Onsite Energy
Power Generation Distributor for derations.
// © MTU Onsite Energy. Subject to alteration due to technological advances. OE 23 479 (72 3E) 2014-08
Weights and dimensions are based on open power units and are estimates only. Consult the factory for accurate weights and dimensions for your specific generator set.