Cree® XLamp® MK-R LEDs Product Description Built on Cree’s FEATURES revolutionary SC³ • Available in ANSI white bins as well Table of Contents Characteristics...............................................2 as 4-step and 2-step EasyWhite bins Flux Characteristics, Standard Order MK‑R LED brings new levels of price and at 2700 K, 3000 K, 3500 K, 4000 K, Codes and Bins - 6 V......................................3 performance to directional LED arrays, 4500 K and 5000 K CCT Flux Characteristics, ANSI White Order Technology® platform, the XLamp® enabling lighting manufacturers to create • Two voltage options: 6 V & 12 V Codes and Bins - 6 V......................................4 the next generation of high-lumen indoor • Low thermal resistance: 1.7 °C/W Flux Characteristics, Standard Order and outdoor LED lighting systems. In • Maximum junction temperature: Codes and Bins -12 V.....................................6 single-LED systems, the XLamp MK‑R Flux Characteristics, ANSI White Order LED, with EasyWhite ® 150 °C color binning, • Binned at 85 °C Codes and Bins - 12 V....................................7 provides the LED industry’s tightest unit- • Viewing angle: 120° Relative Spectral Power Distribution............9 to-unit color consistency. For systems • Available in cool white, 70-, 80- and Relative Flux vs. Junction Temperature........9 using multiple LEDs, the MK-R enables 90‑CRI minimums Electrical Characteristics............................ 10 manufacturers to use fewer LEDs while • Unlimited floor life at Relative Flux vs. Current............................. 11 maintaining light output and color ≤ 30 ºC/85% RH consistency, which translates to lower • Reflow solderable - JEDEC system cost. J‑STD‑020C • Electrically neutral thermal path Relative Chromaticity vs. Current............... 12 Relative Chromaticity vs. Temperature...... 13 Typical Spatial Distribution......................... 13 Thermal Design........................................... 14 The XLamp MK‑R LED is optimized for • RoHS‑ and REACh‑compliant Performance Groups - Brightness............. 15 directional Performance Groups - Chromaticity.......... 16 lighting applications and • UL-recognized component (E349212) CLD-DS60 Rev 7A Product family data sheet is a welcome addition to applications Cree EasyWhite® Bins Plotted on the 1931 requiring high lumen output, a compact CIE Color Space.......................................... 19 optical source and a broad palette of color Cree ANSI White Bins Plotted on the 1931 temperature and CRI values. CIE Color Space.......................................... 20 Bin and Order Code Formats...................... 21 www.cree.com/Xlamp Reflow Soldering Characteristics............... 22 Notes........................................................... 23 Mechanical Dimensions............................. 25 Tape and Reel.............................................. 26 Packaging.................................................... 27 Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® MK-R LEDs Characteristics Characteristics Unit Thermal resistance, junction to solder point °C/W 1.7 degrees 120 Temperature coefficient of voltage (6 V, 1400 mA, 85 °C) mV/°C -4 Temperature coefficient of voltage (12 V, 700 mA, 85 °C) mV/°C -8 Viewing angle - full width half maximum (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current (6 V, 1400 mA, 85 °C) mA 2500 DC forward current (12 V, 700 mA, 85 °C) mA 1250 Reverse voltage V -5 Forward voltage (6 V, 1400 mA, 85 °C) V 5.85 7 Forward voltage (12 V, 700 mA, 85 °C) V 11.7 14 LED junction temperature °C 150 Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 2 XLamp ® MK-R LEDs Flux Characteristics, Standard Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C) The following tables provide order codes for XLamp MK‑R EasyWhite LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 21). Minimum Luminous Flux Color CCT Range 5000 K 4500 K 4000 K 80-CRI EasyWhite 3500 K 3000 K 2700 K 3000 K 90-CRI EasyWhite 2700 K 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1125 H2 900 1044 G4 840 974 H4 970 1125 H2 900 1044 G4 840 974 MKRAWT-00-0000-0B0HG445H MKRAWT-00-0000-0B0HG445F H4 970 1125 MKRAWT-00-0000-0B0HH440H MKRAWT-00-0000-0B0HH440F H2 900 1044 G4 840 974 MKRAWT-00-0000-0B0HG440H MKRAWT-00-0000-0B0HG440F H4 970 1125 MKRAWT-00-0000-0B0HH435H MKRAWT-00-0000-0B0HH435F H2 900 1044 G4 840 974 G2 780 905 MKRAWT-00-0000-0B0HG235H MKRAWT-00-0000-0B0HG235F H2 900 1044 MKRAWT-00-0000-0B0HH230H MKRAWT-00-0000-0B0HH230F G4 840 974 G2 780 905 MKRAWT-00-0000-0B0HG230H MKRAWT-00-0000-0B0HG230F G4 840 974 MKRAWT-00-0000-0B0HG427H MKRAWT-00-0000-0B0HG427F G2 780 905 F4 730 847 MKRAWT-00-0000-0B0HF427H MKRAWT-00-0000-0B0HF427F F2 680 789 MKRAWT-00-0000-0B0UF230H MKRAWT-00-0000-0B0UF230F E4 635 737 E2 590 684 MKRAWT-00-0000-0B0UE230H MKRAWT-00-0000-0B0UE230F E4 635 737 MKRAWT-00-0000-0B0UE427H MKRAWT-00-0000-0B0UE427F E2 590 684 D4 550 638 Chromaticity Region Order Code Chromaticity Region MKRAWT-00-0000-0B0HH450H 50H MKRAWT-00-0000-0B0HH250H MKRAWT-00-0000-0B0HH450F 50F MKRAWT-00-0000-0B0HG450H 40H 35H 30H 27H 30H 27H MKRAWT-00-0000-0B0HH245H MKRAWT-00-0000-0B0HH240H MKRAWT-00-0000-0B0HH235H MKRAWT-00-0000-0B0HG435H MKRAWT-00-0000-0B0HG430H MKRAWT-00-0000-0B0HG227H MKRAWT-00-0000-0B0UE430H MKRAWT-00-0000-0B0UE227H MKRAWT-00-0000-0B0UD427H MKRAWT-00-0000-0B0HH250F MKRAWT-00-0000-0B0HG450F MKRAWT-00-0000-0B0HH445H 45H Order Code MKRAWT-00-0000-0B0HH445F 45F 40F 35F 30F 27F 30F 27F MKRAWT-00-0000-0B0HH245F MKRAWT-00-0000-0B0HH240F MKRAWT-00-0000-0B0HH235F MKRAWT-00-0000-0B0HG435F MKRAWT-00-0000-0B0HG430F MKRAWT-00-0000-0B0HG227F MKRAWT-00-0000-0B0UE430F MKRAWT-00-0000-0B0UE227F MKRAWT-00-0000-0B0UD427F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 23). • Minimum CRI for 80-CRI White is 80. • Minimum CRI for 90-CRI White is 90. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 3 XLamp ® MK-R LEDs Flux Characteristics, ANSI White Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C) Chromaticity Kit CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CRI Typical J4 1120 1299 MKRAWT-00-0000-0B00J4051 J2 1040 1206 MKRAWT-00-0000-0B00J2051 MKRAWT-00-0000-0B0BJ2051 H4 970 1125 MKRAWT-00-0000-0B00H4051 MKRAWT-00-0000-0B0BH4051 H2 900 1044 J2 1040 1206 MKRAWT-00-0000-0B00J20E1 H4 970 1125 MKRAWT-00-0000-0B00H40E1 H2 900 1044 J2 1040 1206 MKRAWT-00-0000-0B00J20E2 H4 970 1125 MKRAWT-00-0000-0B00H40E2 H2 900 1044 J2 1040 1206 MKRAWT-00-0000-0B00J20E3 MKRAWT-00-0000-0B0BJ20E3 H4 970 1125 MKRAWT-00-0000-0B00H40E3 MKRAWT-00-0000-0B0BH40E3 MKRAWT-00-0000-0B0HH40E3 H2 900 1044 MKRAWT-00-0000-0B00H20E3 MKRAWT-00-0000-0B0BH20E3 MKRAWT-00-0000-0B0HH20E3 G4 840 974 J2 1040 1206 MKRAWT-00-0000-0B00J20E4 MKRAWT-00-0000-0B0BJ20E4 H4 970 1125 MKRAWT-00-0000-0B00H40E4 MKRAWT-00-0000-0B0BH40E4 MKRAWT-00-0000-0B0HH40E4 H2 900 1044 MKRAWT-00-0000-0B00H20E4 MKRAWT-00-0000-0B0BH20E4 MKRAWT-00-0000-0B0HH20E4 G4 840 974 J2 1040 1206 MKRAWT-00-0000-0B00J20E5 MKRAWT-00-0000-0B0BJ20E5 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum ANSI White (2700 K - 8300 K) 51 E1 E2 E3 E4 E5 E6 E7 6200 K 6500 K 5700 K 5000 K 4500 K 4000 K 3500 K 3000 K MKRAWT-00-0000-0B0BH2051 MKRAWT-00-0000-0B0BH40E1 MKRAWT-00-0000-0B0BH20E1 MKRAWT-00-0000-0B0BH40E2 MKRAWT-00-0000-0B0BH20E2 MKRAWT-00-0000-0B0HG40E3 MKRAWT-00-0000-0B0HG40E4 H4 970 1125 MKRAWT-00-0000-0B00H40E5 MKRAWT-00-0000-0B0BH40E MKRAWT-00-0000-0B0HH40E5 H2 900 1044 MKRAWT-00-0000-0B00H20E5 MKRAWT-00-0000-0B0BH20E MKRAWT-00-0000-0B0HH20E5 G4 840 974 MKRAWT-00-0000-0B00G40E5 MKRAWT-00-0000-0B0BG40E5 MKRAWT-00-0000-0B0HG40E5 H4 970 1125 MKRAWT-00-0000-0B0BH40E6 H2 900 1044 MKRAWT-00-0000-0B0BH20E6 MKRAWT-00-0000-0B0HH20E6 G4 840 974 MKRAWT-00-0000-0B0BG40E6 MKRAWT-00-0000-0B0HG40E6 G2 780 905 H4 970 1125 MKRAWT-00-0000-0B0BH40E7 H2 900 1044 MKRAWT-00-0000-0B0BH20E7 MKRAWT-00-0000-0B0HH20E7 G4 840 974 MKRAWT-00-0000-0B0BG40E7 MKRAWT-00-0000-0B0HG40E7 G2 780 905 F4 730 847 F2 680 789 MKRAWT-00-0000-0B0UF20E7 E4 635 737 MKRAWT-00-0000-0B0UE40E7 E2 590 684 MKRAWT-00-0000-0B0UE20E7 MKRAWT-00-0000-0B0HG20E6 MKRAWT-00-0000-0B0HG20E7 ** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. • For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 15. • Minimum CRI for 70-CRI White is 70. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 4 XLamp ® MK-R LEDs Flux Characteristics, ANSI White Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C) - Continued Chromaticity Kit CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 974 MKRAWT-00-0000-0B0HG40E8 G2 780 905 MKRAWT-00-0000-0B0HG20E8 F4 730 847 MKRAWT-00-0000-0B0HF40E8 F2 680 789 E4 635 737 E2 590 684 MKRAWT-00-0000-0B0UE20E8 D4 550 638 MKRAWT-00-0000-0B0UD40E8 65 CRI Typical 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum ANSI White (2700 K - 8300 K) E8 2700 K MKRAWT-00-0000-0B0UE40E8 ** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. • For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 15. • Minimum CRI for 70-CRI White is 70. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 5 XLamp ® MK-R LEDs Flux Characteristics, Standard Order Codes and Bins -12 V (If = 700 mA, TJ = 85 °C) The following tables provide order codes for XLamp MK‑R EasyWhite LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 21). Minimum Luminous Flux Color CCT Range 5000 K 4500 K 4000 K 80-CRI EasyWhite 3500 K 3000 K 2700 K 3000 K 90-CRI EasyWhite 2700 K Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1125 H2 900 1044 G4 840 974 2-Step Chromaticity Region 4-Step Order Code Chromaticity Region MKRAWT-00-0000-0D0HH450H 50H MKRAWT-00-0000-0D0HH250H Order Code MKRAWT-00-0000-0D0HH450F 50F MKRAWT-00-0000-0D0HG450H MKRAWT-00-0000-0D0HH250F MKRAWT-00-0000-0D0HG450F H4 970 1125 H2 900 1044 MKRAWT-00-0000-0D0HH445H G4 840 974 MKRAWT-00-0000-0D0HG445H MKRAWT-00-0000-0D0HG445F H4 970 1125 MKRAWT-00-0000-0D0HH440H MKRAWT-00-0000-0D0HH440F H2 900 1044 G4 840 974 MKRAWT-00-0000-0D0HG440H MKRAWT-00-0000-0D0HG440F H4 970 1125 MKRAWT-00-0000-0D0HH435H MKRAWT-00-0000-0D0HH435F H2 900 1044 G4 840 974 G2 780 905 MKRAWT-00-0000-0D0HG235H MKRAWT-00-0000-0D0HG235F H2 900 1044 MKRAWT-00-0000-0D0HH230H MKRAWT-00-0000-0D0HH230F G4 840 974 G2 780 905 MKRAWT-00-0000-0D0HG230H MKRAWT-00-0000-0D0HG230F G4 840 974 MKRAWT-00-0000-0D0HG427H MKRAWT-00-0000-0D0HG427F G2 780 905 F4 730 847 MKRAWT-00-0000-0D0HF427H MKRAWT-00-0000-0D0HF427F F2 680 789 MKRAWT-00-0000-0D0UF230H MKRAWT-00-0000-0D0UF230F E4 635 737 E2 590 684 MKRAWT-00-0000-0D0UE230H MKRAWT-00-0000-0D0UE230F E4 635 737 MKRAWT-00-0000-0D0UE427H MKRAWT-00-0000-0D0UE427F E2 590 684 D4 550 638 45H 40H 35H 30H 27H 30H 27H MKRAWT-00-0000-0D0HH245H MKRAWT-00-0000-0D0HH240H MKRAWT-00-0000-0D0HH235H MKRAWT-00-0000-0D0HG435H MKRAWT-00-0000-0D0HG430H MKRAWT-00-0000-0D0HG227H MKRAWT-00-0000-0D0UE430H MKRAWT-00-0000-0D0UE227H MKRAWT-00-0000-0D0UD427H MKRAWT-00-0000-0D0HH445F 45F 40F 35F 30F 27F 30F 27F MKRAWT-00-0000-0D0HH245F MKRAWT-00-0000-0D0HH240F MKRAWT-00-0000-0D0HH235F MKRAWT-00-0000-0D0HG435F MKRAWT-00-0000-0D0HG430F MKRAWT-00-0000-0D0HG227F MKRAWT-00-0000-0D0UE430F MKRAWT-00-0000-0D0UE227F MKRAWT-00-0000-0D0UD427F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 23). • Minimum CRI for 80-CRI White is 80. • Minimum CRI for 90-CRI White is 90. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 6 XLamp ® MK-R LEDs Flux Characteristics, ANSI White Order Codes and Bins - 12 V (If = 700 mA, TJ = 85 °C) Chromaticity Kit CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CRI Typical J4 1120 1299 MKRAWT-00-0000-0D00J4051 J2 1040 1206 MKRAWT-00-0000-0D00J2051 MKRAWT-00-0000-0D0BJ2051 H4 970 1125 MKRAWT-00-0000-0D00H4051 MKRAWT-00-0000-0D0BH4051 H2 900 1044 J2 1040 1206 MKRAWT-00-0000-0D00J20E1 H4 970 1125 MKRAWT-00-0000-0D00H40E1 H2 900 1044 J2 1040 1206 MKRAWT-00-0000-0D00J20E2 H4 970 1125 MKRAWT-00-0000-0D00H40E2 H2 900 1044 J2 1040 1206 MKRAWT-00-0000-0D00J20E3 MKRAWT-00-0000-0D0BJ20E3 H4 970 1125 MKRAWT-00-0000-0D00H40E3 MKRAWT-00-0000-0D0BH40E3 MKRAWT-00-0000-0D0HH40E3 H2 900 1044 MKRAWT-00-0000-0D00H20E3 MKRAWT-00-0000-0D0BH20E3 MKRAWT-00-0000-0D0HH20E3 G4 840 974 J2 1040 1206 MKRAWT-00-0000-0D00J20E4 MKRAWT-00-0000-0D0BJ20E4 H4 970 1125 MKRAWT-00-0000-0D00H40E4 MKRAWT-00-0000-0D0BH40E4 MKRAWT-00-0000-0D0HH40E4 H2 900 1044 MKRAWT-00-0000-0D00H20E4 MKRAWT-00-0000-0D0BH20E4 MKRAWT-00-0000-0D0HH20E4 G4 840 974 J2 1040 1206 MKRAWT-00-0000-0D00J20E5 MKRAWT-00-0000-0D0BJ20E5 H4 970 1125 MKRAWT-00-0000-0D00H40E5 MKRAWT-00-0000-0D0BH40E MKRAWT-00-0000-0D0HH40E5 H2 900 1044 MKRAWT-00-0000-0D00H20E5 MKRAWT-00-0000-0D0BH20E MKRAWT-00-0000-0D0HH20E5 G4 840 974 MKRAWT-00-0000-0D00G40E5 MKRAWT-00-0000-0D0BG40E5 MKRAWT-00-0000-0D0HG40E5 H4 970 1125 MKRAWT-00-0000-0D0BH40E6 H2 900 1044 MKRAWT-00-0000-0D0BH20E6 MKRAWT-00-0000-0D0HH20E6 G4 840 974 MKRAWT-00-0000-0D0BG40E6 MKRAWT-00-0000-0D0HG40E6 G2 780 905 H4 970 1125 MKRAWT-00-0000-0D0BH40E7 H2 900 1044 MKRAWT-00-0000-0D0BH20E7 MKRAWT-00-0000-0D0HH20E7 G4 840 974 MKRAWT-00-0000-0D0BG40E7 MKRAWT-00-0000-0D0HG40E7 G2 780 905 F4 730 847 F2 680 789 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum ANSI White (2700 K - 8300 K) 51 E1 E2 E3 E4 E5 E6 E7 6200 K 6500 K 5700 K 5000 K 4500 K 4000 K 3500 K 3000 K MKRAWT-00-0000-0D0BH2051 MKRAWT-00-0000-0D0BH40E1 MKRAWT-00-0000-0D0BH20E1 MKRAWT-00-0000-0D0BH40E2 MKRAWT-00-0000-0D0BH20E2 MKRAWT-00-0000-0D0HG40E3 MKRAWT-00-0000-0D0HG40E4 MKRAWT-00-0000-0D0HG20E6 MKRAWT-00-0000-0D0HG20E7 MKRAWT-00-0000-0D0UF20E7 E4 635 737 MKRAWT-00-0000-0D0UE40E7 E2 590 684 MKRAWT-00-0000-0D0UE20E7 ** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. • For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 15. • Minimum CRI for 70-CRI White is 70. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 7 XLamp ® MK-R LEDs Flux Characteristics, ANSI White Order Codes and Bins - 12 V (If = 700 mA, TJ = 85 °C) - Continued Chromaticity Kit CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 974 MKRAWT-00-0000-0D0HG40E8 G2 780 905 MKRAWT-00-0000-0D0HG20E8 F4 730 847 MKRAWT-00-0000-0D0HF40E8 F2 680 789 65 CRI Typical 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum ANSI White (2700 K - 8300 K) E8 2700 K E4 635 737 MKRAWT-00-0000-0D0UE40E8 E2 590 684 MKRAWT-00-0000-0D0UE20E8 D4 550 638 MKRAWT-00-0000-0D0UD40E8 ** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. • For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 15. • Minimum CRI for 70-CRI White is 70. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 8 XLamp ® MK-R LEDs Relative Spectral Power Relative Spectral Power Distribution (6 V, 1400 mA; 12 V, 700 mA; TJ= 85 °C) Relative Radiant Power (%) 100 80 60 Cool White Neutral White Warm White 40 20 0 Relative Flux Output vs. Junction Temperature 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux vs. Junction Temperature (6 V, IF = 1400 mA; 12 V, IF = 700 mA) Relative Luminous Flux (%) 120 100 80 60 40 20 0 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 9 XLamp ® MK-R LEDs Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 85 °C) 2500 Forward Current (mA) 2000 1500 6V 1000 500 0 5.25 5.50 Electrical Characteristics (Tj = 85ºC) 5.75 6.00 6.25 Forward Voltage (V) 1250 Forward Current (mA) 1000 750 12 V 500 250 0 10.5 11.0 11.5 12.0 12.5 Forward Voltage (V) Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 10 XLamp ® MK-R LEDs Relative Intensity vs. Current (Tj = 85ºC) Relative Flux vs. Current (TJ = 85 °C) 180 Relative Luminous Flux (%) 150 120 6V 90 60 30 0 0 500 1000 1500 Relative Intensity vs. Current (Tj = 85ºC) 2000 2500 Forward Current (mA) Relative Luminous Flux (%) 180 150 120 12 V 90 60 30 0 0 250 500 750 1000 1250 Forward Current (mA) Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 11 XLamp ® MK-R LEDs Relative Chromaticity vs. Current - Warm White (TJ = 85 °C) 0.006 6V 0.004 0.002 ΔCCx 0.000 ΔCCy -0.002 -0.004 -0.006 0 500 1000 1500 2000 2500 Current (mA) Relative Chromaticity Vs. Current - Warm White 0.006 12 V 0.004 0.002 ΔCCx 0.000 ΔCCy -0.002 -0.004 -0.006 0 250 500 750 1000 1250 Current (mA) Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 12 XLamp ® MK-R LEDs Relative Chromaticity Vs. Temperature - Warm White ΔCCx Relative Chromaticity vs. Temperature - Warm White (6 V, IF = 1400 mA; 12 V, IF = 700 mA) 0.006 0.004 0.002 ΔCCx 0.000 ΔCCy -0.002 -0.004 -0.006 0 25 50 75 100 125 150 Tsp (°C) Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 40 20 -100 -80 -60 -40 -20 0 0 20 40 60 80 100 Angle (º) Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 13 XLamp ® MK-R LEDs Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 3000 Maximum Current (mA) 2500 2000 1500 6V Rj-a = 2°C/W 1000 Rj-a = 4°C/W Thermal Design 500 Rj-a = 6°C/W Rj-a = 8°C/W 0 0 20 40 60 80 100 120 140 Ambient Temperature (ºC) 1400 Maximum Current (mA) 1200 1000 800 12 V 600 Rj-a = 2°C/W 400 Rj-a = 4°C/W Rj-a = 6°C/W 200 0 Rj-a = 8°C/W 0 20 40 60 80 100 120 140 Ambient Temperature (ºC) Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 14 XLamp ® MK-R LEDs Performance Groups - Brightness (Tj = 85 °C) XLamp MK-R LEDs are tested for luminous flux and placed into one of the following bins. Group Code Min. Luminous Flux Max. Luminous Flux D2 510 550 D4 550 590 E2 590 635 E4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 15 XLamp ® MK-R LEDs Performance Groups - Chromaticity (Tj = 85 °C) XLamp MK‑R LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code 50F 45F 40F 35F 30F 27F CCT 5000 K 4500 K 4000 K 3500 K 3000 K 2700 K EasyWhite Color Temperatures – 2-Step x y 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3674 0.3772 0.3582 0.3710 0.3562 0.3573 0.3642 Code x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3643 0.3720 0.3597 0.3689 0.3587 0.3620 0.3625 0.3628 0.3647 0.3744 0.3685 0.3784 0.3741 0.3782 0.3837 0.3804 0.3818 0.3912 0.3917 0.3867 0.3857 0.3863 0.3758 0.3844 0.3778 0.3981 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 50F 45F 40F 35F 30F 27F CCT 5000 K 4500 K 4000 K 3500 K 3000 K 2700 K Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 16 XLamp ® MK-R LEDs Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED ANSI White Bins Code CCT Bin Code 0A0 0B0 051 6200 K 0C0 0D0 Bin Code x y 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2950 0.2970 0R0 x y 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.2980 0.2880 Bin Code 1A0 x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 Bin Code 1R0 x y 0.3068 0.3113 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.2895 0.3135 0.2870 0.3210 0.3028 0.3304 0.3005 0.3415 0.2962 0.3220 0.2937 0.3312 0.3115 0.3391 0.3099 0.3509 0.2984 0.3133 0.2962 0.3220 0.3130 0.3290 0.3115 0.3391 0S0 1B0 1S0 0.2920 0.3060 0.2895 0.3135 0.3048 0.3207 0.3028 0.3304 0.2962 0.3220 0.2937 0.3312 0.3115 0.3391 0.3099 0.3509 0.3028 0.3304 0.3048 0.3207 0.2984 0.3133 0T0 0.3005 0.3415 0.3028 0.3304 0.2962 0.3220 1C0 0.3205 0.3481 0.3213 0.3373 0.3130 0.3290 1T0 0.3196 0.3602 0.3205 0.3481 0.3115 0.3391 0.2984 0.3133 0.3009 0.3042 0.3130 0.3290 0.3144 0.3186 0.3048 0.3207 0.3068 0.3113 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3093 0.2993 0.3221 0.3261 0.3009 0.3042 0.3037 0.2937 0.3144 0.3186 x y .3371 .3490 0U0 1D0 1U0 0.3231 0.3120 0.3161 0.3059 ANSI White Bins Code CCT Bin Code 2A0 2B0 051 6200 K 2C0 2D0 x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 Bin Code 2R0 x y 0.3222 0.3243 0.3290 0.3300 0.3290 0.3180 0.3231 0.3120 Bin Code 3A0 .3451 .3554 .3440 .3427 .3366 .3369 0.3207 0.3462 0.3196 0.3602 .3376 .3616 0.3290 0.3538 0.3290 0.3690 .3463 .3687 0.3290 0.3417 0.3290 0.3538 .3451 .3554 2S0 3B0 0.3215 0.3350 0.3207 0.3462 .3371 .3490 0.3290 0.3538 0.3290 0.3690 .3463 .3687 0.3376 0.3616 0.3371 0.3490 0.3290 0.3417 2T0 0.3381 0.3762 0.3376 0.3616 0.3290 0.3538 3C0 .3551 .3760 .3533 .3620 .3451 .3554 0.3290 0.3417 0.3290 0.3300 .3451 .3554 0.3371 0.3490 0.3366 0.3369 .3533 .3620 0.3366 0.3369 0.3361 0.3245 0.3290 0.3300 0.3290 0.3180 2U0 3D0 .3515 .3487 .3440 .3427 Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 17 XLamp ® MK-R LEDs Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED ANSI White Bins Code Bin Code CCT 1A0 1B0 0E1 6500 K 1C0 1D0 Code y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 0.3028 0.3115 0.3130 0.3290 Bin Code 0.3350 .3371 .3490 0.3290 0.3417 .3451 .3554 0.3290 0.3300 .3440 .3427 0.3222 0.3243 .3366 .3369 0.3304 0.3207 0.3462 .3376 .3616 0.3391 0.3290 0.3538 .3463 .3687 .3451 .3554 0.3048 0.3207 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3130 0.3290 0.3130 0.3213 0.3221 0.3261 0.3144 0.3186 2A0 2B0 x y 0.3215 0.3290 4C0 4D0 .3371 .3490 .3687 .3551 .3760 .3533 .3620 .3451 .3554 0.3417 .3451 .3554 0.3490 .3533 .3620 .3515 .3487 .3440 .3427 x y 0.3350 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3417 0.3290 0.3290 0.3373 0.3371 2C0 2D0 x y .3530 .3615 .3590 .3521 Code CCT 3B0 .3463 0.3215 5700 K 3A0 0.3417 0.3290 0E2 0.3366 0.3369 0.3290 0.3300 Bin Code 4500 K Bin Code CCT y CCT ANSI White Bins 4B0 Code x Code Bin Code 4A0 0E4 x ANSI White Bins CCT ANSI White Bins ANSI White Bins 0E3 5000 K 3C0 3D0 ANSI White Bins Code CCT Bin Code x y .3597 .3670 .3578 .3889 .3690 .3659 .3702 .3722 .3941 .3848 .3825 .3798 .4080 .3916 5A0 6A0 .3512 .3465 .3783 .3646 .4017 .3751 .3548 .3736 .3702 .3722 .3941 .3848 .3641 .3804 .3736 .3874 .3996 .4015 .3615 .3659 .3869 .3958 .4146 .4089 .3530 .3597 .3825 .3798 .4080 .3916 .3641 .3804 .3825 .3798 .4080 .3916 .3736 .3874 .3869 .3958 .4146 .4089 .3702 .3722 .4006 .4044 .4299 .4165 .3615 .3659 .3950 .3875 .4221 .3984 .3668 .3957 .3783 .3646 .4017 .3751 .3771 .4034 .3825 .3798 .4080 .3916 .3736 .3874 .3950 .3875 .4221 .3984 .3641 .3804 .3898 .3716 .4147 .3814 5B0 0E5 4000 K 5C0 5D0 6B0 0E6 3500 K 6C0 6D0 Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 18 XLamp ® MK-R LEDs Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED ANSI White Bins Code Bin Code CCT 7A0 7B0 0E7 ANSI White Bins 3000 K 7C0 7D0 Code x y .4147 .4221 .4342 .4028 .4259 .3853 .4221 .4299 .4430 .4212 Bin Code CCT x y .3814 .4373 .3893 .3984 .4465 .4071 .4582 .4099 .4483 .3919 .3984 .4465 .4071 .4165 .4562 .4260 .4687 .4289 .4342 .4028 .4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071 .4259 .4342 .4465 .4071 .4373 .3893 8A0 8B0 .4582 .4099 .4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126 .3853 .4483 .3919 .4028 .4582 .4099 .4700 .4126 .4593 .3944 0E8 2700 K 8C0 8D0 Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700 K 3000 K 0.43 3500 K 0.42 4000 K 4500 K 0.41 CCy 0.40 5000 K 0.39 5700 K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 19 XLamp ® MK-R LEDs Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.45 0.44 0.43 2600 K 3000 K 3200 K 0.42 3500 K 7B 4000 K 0.40 6C 4300 K 0.39 0.37 4B 3B ANSI C78.377A 4D 4A 3D 0.35 6A 5D 5A 3C 0.36 7A 6D 5B 4C 8D 8A 7D 5C 4750 K 5300 K 0.38 6B 4500 K 5000 K 8C 8B 7C 3700 K 0.41 CCy 2700 K 2900 K 3A 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 0.35 CCy 3B 2S 2C 1T 8000 K 1S 0.34 0T 0.33 0S 0.32 0B 0.31 0.30 3R 2A 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 2D 1C 1B 0C 3A 2B 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 20 XLamp ® MK-R LEDs Bin and Order Code Formats Bin codes and order codes are configured as follows. Order CodeBin Code Series = MKR Series = MKR Internal code Internal code Forward voltage class B=6V D = 12 V Luminous flux group CRI specification B = 70-CRI minimum H = 80-CRI minimum U = 90-CRI minimum 0 = No minimum SSSCCC-HH-HHHH-GHKLNNNNN Kit code Internal code Color AWT = White Internal code SSSCCC-E-DDD-MM-HK-L-PP CRI specification B = 70-CRI minimum H = 80-CRI minimum U = 90-CRI minimum 0 = No minimum Forward voltage class B=6V D = 12 V Chromaticity bin Color AWT = White Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 21 XLamp ® MK-R LEDs Reflow Soldering Characteristics In testing, Cree has found XLamp MK-R LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Lead-Based Solder Lead-Free Solder Average Ramp-Up Rate (Tsmax to Tp) 3 °C/second max. 3 °C/second max. Preheat: Temperature Min (Tsmin) 100 °C 150 °C Preheat: Temperature Max (Tsmax) 150 °C 200 °C 60-120 seconds 60-180 seconds 183 °C 217 °C 60-150 seconds 60-150 seconds 215 °C 260 °C 10-30 seconds 20-40 seconds 6 °C/second max. 6 °C/second max. 6 minutes max. 8 minutes max. Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5 °C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 °C to Peak Temperature Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 22 XLamp ® MK-R LEDs Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM‑80 data sets available for this LED, refer to the LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MK-R LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 23 XLamp ® MK-R LEDs Notes - Continued Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 24 XLamp ® MK-R LEDs 6 Mechanical Dimensions 6 6 5 5 5 4 4 4 3 2 2 2 1 All measurements are ±.13 unless REV otherwise REV mm REV DESCRIPTION DESCRIPTION DESCRIPTION indicated. B 6 7.000 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 6.70 6.70 4 .73.73 .70.70 .73 REVISONS BY 3 6.70 .70 .70 .70 .70 REV B 4.08 6.70 7.000 D 7.000 7.000 Anode 7.000 .70.70 R3.250 .70 .73 6.76 6.76 6.76 7.000 R3.250 R3.250 6.76 .70 3.90 3.90 Top View BY D B SHOW VIEWS SHOW LATEST REVISION DC DC 8/ VIEWS VIEWS SHOW LATEST LATEST REVISION REVISION B 4.08 4.08 4.08 7.000 7.000 3 3 REVISONS REVISONS NOTICE OTICE NOTICE EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION THIS PLOT PLOT ANDAND THE THE INFORMATION INFORMATION NTAINED WITHIN ARE ARE THE THE PROPRIETARY PROPRIETARY ANDTHE ANDPROPRIETARY AND NFIDENTIAL OF CREE, INC. THIS PLOT TION MATION OF CREE, OF INFORMATION CREE, INC. INC. THISTHIS PLOT PLOT Y NOT BE COPIED, REPRODUCED DISCLOSED TO ANY RODUCED REPRODUCED OR DISCLOSED OR DISCLOSED TO ANY TO OR ANY AUTHORIZED WITHOUT THE WRITTEN CONSENT SON WITHOUT WITHOUTPERSON THE THE WRITTEN WRITTEN CONSENT CONSENT CREE INC. 3.90 Bottom View Side View R3.250 .70 C 3.90 6.70 6.70 6.70 .70.70 6.55 6.55 .70 3.90 3.90 1.23 1.23 3.90 6.55 1.23 6.70 6.55 .70 3.90 5.27 5.27 6.70 1.23 5.27 B 5.27 6.70 3.00 3.00 .70.70 .55.55 .70 3.00 3.00 .55 .70 .55 RECOMMENDED RECOMMENDED STENCIL STENCIL PATTERN PATTERN RECOMMENDED STENCIL SHADED SHADED AREA AREA IS OPEN IS OPEN SHADED AREA IS OPEN RECOMMENDED PCB SOLDER PAD A ECOMMENDED RECOMMENDED PCBPCB SOLDER SOLDER PADPAD RECOMMENDED PCB SOLDER PAD Recommended PCB Solder Pad 6 6 6 5 5 5 6 4 4 45 DRAWNDRAWN BY BY DATE DATE UNLESS UNLESS OTHERWISE OTHERWISE SPECIFIED SPECIFIED DATE DRAWN BY 4600 Sil4 D. CRONIN D. CRONIN 11/7/12 SPECIFIED11/7/12 DIMENSIONS DIMENSIONS ARE INARE IN UNLESS OTHERWISE Durham D D. CRONIN 11/7/12 ARE IN DATE DATE CHECK CHECK DRAWN BY MILLIMETERS MILLIMETERS AND AFTER AND AFTER FINISH. FINISH. DIMENSIONS UNLESS OTHERWISE SPECIFIED Phone P (9 CHECK DATE MILLIMETERS AND AFTER FINISH. D. CRON TOLERANCE TOLERANCE UNLESS UNLESS SPECIFIED: SPECIFIED: DIMENSIONS ARE IN Fax (919 F PATTERN TOLERANCE UNLESS SPECIFIED: CHECK MILLIMETERS AND AFTER FINISH. .XX .XX ± ±.25 .25 APPROVED APPROVED DATE DATE RECOMMENDED STENCIL PATTERN .XX ± .25 APPROVED DATE TITLE TITLE TOLERANCE UNLESS SPECIFIED: .XXX .XXX ± .125 ± .125 TITLE .XXX ± .125 .XX ± .25 APPROVED SHADED AREA IS OPEN X° X°± ±.5 ° .5 ° THIRD THIRD ANGLE ANGLE PROJECTION PROJECTION .XXX ± .125 X° MATERIAL ± .5 ° MATERIAL FOR PROJECTION SHEET FOR SHEET METALMETAL PARTSPARTS ONLY ONLY THIRD ANGLE X° ± .5 ° MATERIAL FOR SHEET METAL PARTS ONLY THIRD ANGLE PROJECTION MATERIAL .X .X ± ± 1.5 1.5 FOR SHEETDRAWING METAL PARTS ONLY DRAWING NO. NO. SIZE SIZE .X ± 1.5 .XX .XX ± ±.75 .75 .X ± 1.5 DR SIZE ±FINISH .75 .XXX .XXX ± .25 ± .25 FINAL.XX PROTECTIVE FINAL PROTECTIVE FINISH .XX ± .75 .XXX ± .25 FINAL PROTECTIVE FINISH X° X° ± ±.5 ° .5 ° .XXX ± .25 FINAL PROTECTI X° ± .5 ° SCALE SCALE X° ± .5 ° SHEET SH SURFACE SURFACE FINISH: FINISH: 1.6 1.6 11.000 11.000 1.6SCALE 1.6 SURFACE FINISH: SURFACE FINISH: 11.000 Recommended Stencil Pattern (Shaded Area Is Open) 3 3 4 3 MKR MKR Marketing Marketing Spec Sp MK CC 2 2 3 2610-00031 2610-0003 C 1 2 Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 25 XLamp ® MK-R LEDs 6 5 4 3 2 Tape and Reel 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV A DESCRIPTION BY DATE Initial Release DC 12/7/12 APP'D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. D All dimensions in mm. D 1.5± .1 User Feed Direction 12±.1 END 4±.10 1.75 ±.10 START CATHODE SIDE 4.31 16 +.3 -.0 C 7.4 C 0.36 ANODE SIDE Trailer 180mm (min) of empty pockets 6 sealed with tape (15 pockets min.) NOTICE Loaded Pockets (1000 Lamps) 5 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 4 3 Leader 420mm (min) of empty pockets sealed with tape (35 pockets min.) User Feed Direction 2 1 2400-00009 INDEX QTY ITEM 1 2 1 2 2400-00009-CORE 2400-00009-REEL COMMENTS B B D D 13mm A 12.4 +.2 .0 MEASURED AT HUBTHIRD ANGLE PROJECTION 13 " C UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° DATE DRAWN BY D. CRONIN CHECK 6 5 4 Phone (919) 313-5300 -- C A Fax (919) 313-5558 DATE -- TITLE -- MKR LOADING SPEC MATERIAL -- SIZE -- 3 SCALE 2402-00025 A SHEET 3.000 2 16.4 +0.2 .0 MEASURED AT HUB REV. DRAWING NO. C FINAL PROTECTIVE FINISH SURFACE FINISH: 1.6 330 +.25 -.75 4600 Silicon Drive Durham, N.C 27703 12/7/12 DATE -APPROVED OF 1 /1 1 1.9±.4 21 ±.4 13.1 ±.2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° BY DESCRIPTION DATE APP'D DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 09/29/09 CHECK DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- TITLE -- REEL, 13" X 12MM, 3 PIECE SNAP Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, XLamp , EasyWhite and SC3 Technology® are registered ANTI-STATIC HIPS trademarks of Cree, Inc. THIRD ANGLE PROJECTION ®FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH: 6 5 4 3 63 MATERIAL ® ® SIZE FINAL PROTECTIVE FINISH 2 SCALE C 0.500 REV. DRAWING NO. 2400-00009 SHEET 1 A OF 26 1 /1 XLamp ® MK-R LEDs Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks of Cree, Inc. 27