SURFACE MOUNT MICROPROCESSOR CRYSTAL Page 1 of 3 SERIES RH100 FEATURES COMPACT DESIGN HIGH ACCURACY EXCELLENT FOR HIGH DENSITY SURFACE MOUNTING SPECIFICATIONS PARAMETER VALUE FREQUENCY RANGE FUNDAMENTAL THIRD OVERTONE MODE OF OSCILLATION FREQUENCY TOLERANCE AT 25°C FREQUENCY STABILITY OVER TEMPERATURE OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE AGING LOAD CAPACITANCE EQUIVALENT SERIES RESISTANCE SHUNT CAPACITANCE DRIVE LEVEL SHOCK RESISTANCE REFLOW CONDITIONS FREQUENCY (MHz) 10.000TO 15.999 16.000 TO 19.999 20.000 TO 54.999 55.000 TO 115.000 TABLE 1 MODE FUND FUND FUND/OT 3OT 10.000 MHz TO 115.000 MHz 10.000 MHz TO 55.000 MHz 25.000 MHz TO 115.000 MHz ±100 PPM MAXIMUM (±10 PPM, ±20 PPM AND ±50 PPM AVAILABLE) ±100 PPM MAXIMUM (±10 PPM, ±20 PPM AND ±50 PPM AVAILABLE) -20°C TO +70°C STANDARD -40°C TO +85°C EXTENDED -40°C TO +85°C ±3 PPM PER YEAR MAXIMUM 9 pF to 32 pF OR SERIES SEE TABLE 1 7.0 pF MAXIMUM 500 µW MAX ±5 PPM MAXIMUM 75 cm DROP TEST IN 3 AXES ON TO A HARD SURFACE 260°C ±5°C FOR 10s MAXIMUM MAXIMUM ESR (OHMS) 100 80 60/40 40 PART NUMBERING SYSTEM TYPE - FREQUENCY - LOAD CAPACITANCE - RH100 - IN MHz - 9 TO 32 pF FOR PARALLEL S FOR SERIES - TOLERANCE/STABLITY (PPM/PPM) Blank FOR MAXIMUM PPMPPM Example: 1020, 2050 MODE Blank FOR < 24.576 MHz F FOR ≥ 24.576 MHz 3OT THIRD OVERTONE - EXTENDED TEMPERATURE - TAPE & REEL - Blank FOR STANDARD EXT FOR EXTENDED - TR - EXAMPLE: RH100-24.000-18-TR Surface Mount Microprocessor Crystal, 3.2 x 2.5 mm, 24.000 MHz, Fundamental mode, 18 pF load, ±100 ppm Tolerance, ±100 ppm Stability, from -10°C to +60°C, Tape and reel packaging R A L T R O N E L E C T R O N I C S 1 0 4 0 0 N .W . 3 3 rd STREET Miami, Florida 33172 U.S.A. Telephone: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] web site: http://www.raltron.com SURFACE MOUNT MICROPROCESSOR CRYSTAL Page 2 of 3 SERIES RH100 1.3 .051 1.0 .039 4.0 ± 0.1 .157 ± .004 2.8 ± 0.1 .110 ± .004 3 .5 ± 0 .1 2.0 ± 0.05 .079 ± .002 .1 3 8 ± .0 0 8 ø 1.15 ø .045 0.25 ± 0.05 .010 ± .002 4.0 ± 0.1 .157 ± .004 8 .0 ± 0 .2 1 .7 5 ± 0 .1 .0 6 9 ± .0 0 4 ø 1.5 ø .059 .3 1 5 ± .0 0 8 0.25 ± 0.1 .010 ± .004 0.65 ± 0.15 .026 ± .006 0.65 ± 0.15 .026 ± .006 0.20 .008 GND 0.90 ± 0.15 .035 ± .006 1.00 .039 BOTTOM VIEW 1.20 .047 0.20 .008 0.90 ± 0.15 .035 ± .006 4x (R0.20) 4x (R.008) GND 2.5 ± 0.2 .098 ± .008 0.7 ± 0.1 .028 ± .004 MARKING AREA TOP VIEW 3 .5 ± 0 .0 5 3.20 ± 0.2 .126 ± .008 CARRIER TAPE DIMENSIONS .1 3 8 ± .0 0 2 MECHANICAL SPECIFICATION 1.0 ± 0.1 .039 ± .004 1.3 .051 1.1 0.8 1.1 .043 .031 .043 NOTE: REFER TO EIA-481 FOR NON-SPECIFIED DIMENSIONS PACKAGING 180 mm REEL DIAMETER 8 mm TAPE WIDTH, 4 mm PITCH QUANTITY: 3000 PIECES PER REEL LAND PATTERN IN ACCORDANCE WITH EIA-481 R A L T R O N E L E C T R O N I C S 1 0 4 0 0 N .W . 3 3 rd STREET Miami, Florida 33172 U.S.A. Telephone: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] web site: http://www.raltron.com SURFACE MOUNT MICROPROCESSOR CRYSTAL Page 3 of 3 SERIES RH100 REFLOW PROFILE tP TP Critical Zone TL to TP Ramp-up TL tL TSMAX Temp. [°C] TSMIN Ramp-down tS Preheat Time [sec] t[25°C] to Peak Reflow profile Temperature Min Preheat Temperature Max Preheat Time (TSMIN to TSMAX) Temperature Peak Temperature Ramp-up rate Ramp-down rate Time within 5°C of Peak Temperature Time t[25°C] to Peak Temperature Time TSMIN TSMAX tS TL TP RUP RDOWN tP t[25°C] to Peak tL 150°C 200°C 60-180 sec. 217°C 260°C 3°C/sec max. 6°C/sec max. 10 sec. 480 sec. 60-150 sec. ENVIRONMENTAL PARAMETER MOISTURE SENSITIVITY LEVEL RoHS 2 REACH SVHC HALOGEN-FREE ESD CLASSIFICATION LEVEL TERMINATION FINISH UNIT WEIGHT (GRAMS) VALUE 1 6/6 LEAD FREE COMPLIANT COMPLIANT N/A Au 0.01945 JANUARY 2014 R A L T R O N E L E C T R O N I C S 1 0 4 0 0 N .W . 3 3 rd STREET Miami, Florida 33172 U.S.A. Telephone: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] web site: http://www.raltron.com