VCXO Page 1 of 2 9X14 PECL J-LEADED VCXO ****ROHS COMPLIANT*** (SEE PAGE TWO FOR PART NUMBERING SCHEME) " ELECTRICAL SPECIFICATION PARAMETER Frequency, nom Supply voltage, nom. Supply current, max. SYMBOL fo Vcc Is VALUE 70.000~207.000 3.3VDC 5.0VDC 135.0 UNIT MHz V mA 2.275 / 1.68 3.975/3.38 40…60 OR 45…55 0.330…1.0 (see note A) 1.0 SEE PART NUMBER GENERATION TABLE 0…+3.3 +0.5…+4.5 SEE PART NUMBER GENERATION TABLE 10 10.0 10.0 V % ns ps ppm En Dis CONDITIONS Vcc±5% Vcc=+3.3V/Vc=+1.65V OR +5.0V/Vc=+2.5V Ta=+25°C, 50Ω to Vcc-2.0VDC load Vcc=+3.3VDC, load=50Ω to Vcc-2.0VDC load=50Ω to Vcc-2.0VDC / @50%Vcc, Ta=+25°C 20%~80% Vout, 80%~20% Vout, max 1σ, Fj=12KHz…20MHz Including operating temp., ±5% load & supply variations, calibration @+25°C, and 10 year aging DC Vc= 0~3.3V (at Vcc=3.3V ) Vc=0.5~4.5V (at Vcc=5.0V) Vcc=+3.3V/Vc=+1.65V OR +5.0V/Vc=+2.5V Ta=+25°C, 50Ω to Vcc-2.0VDC load Pin 2=Low, Vcc-1.620 (max.) Pin 2=High, Vcc-1.025 (min.) PECL output level Duty cycle Rise- / fall time, max. Jitter, rms, max. Overall freq. stability, max. VOH / VOL DC tr / tf J ∆f/fc Control voltage range Pullability min Vc APR Linearity, max. Input impedance, min. Modulation freq. bandwidth, min. ∆f/V Zin MBW (-3dB) Enable option Disable option Operating temperature range Ta - Storage temperature range Absolute voltage ranges T(stg) Vcc, Vc(abs) Non-destructive, DC SEE PART NUMBER GENERATION TABLE -55…+90 -0.5…+7.0 V ppm % KΩ KHz Enabled Pin 5 will assume a fixed level of logic “0”, and pin 4 will assume a fixed level of logic“1” °C °C V NOTE A: RISE AND FALL TIME VALUES (tr/tf) ARE FREQUENCY DEPENDENT. MECHANICAL SPECIFICATION OUTLINE TOLERANCE: ±0.015” / 0.4mm (Unless otherwise specified) 4 pin Version 6 pin Version .550 MAX 13.96 MAX. .385 9.77 .030 .76 .018 TYP. .46 TYP. .100 TYP. 2.54 TYP. .200 TYP. 5.08 TYP. .300 ±008 7.61 ±.20 RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th PIN FUNCTIONS (4 pins): [1] VOLTAGE CONTROL [2] CASE / GROUND [3] OUTPUT [4] SUPPLY VOLTAGE .76 .030 .185 MAX. 4.70 MAX. .018 TYP. .46 TYP. PIN FUNCTIONS (6 pins): [1] VOLTAGE CONTROL [2] EN / DIS OR NC [3] CASE / GROUND [4] OUTPUT [5] COMP. OUTPUT OR NC [6] SUPPLY VOLTAGE .185 MAX. 4.70 MAX. .350 8.88 .385 MAX. 9.77 MAX. .550 .350 8.88 " .300 ±008 7.61 ±.20 MARKING (EXAMPLE): VE8950A-LZ 155.520-T-C-EL RAL D/C St ! Miami, Florida 33172 ! U.S.A. phone: +001(305) 593-6033 ! fax: +001(305)594-3973 ! e-mail: [email protected] ! internet: http:/www.raltron.com VCXO Page 2 of 2 " REFLOW SOLDER " ELECTRICAL TEST DIAGRAM ▀ PART NUMBER GENERATION SERIES OVERALL STABILITY VC88: 5.0V PECL, NO E/D 50: ±50ppm VC89: 3.3V PECL, NO E/D 00: ±100ppm VE88: 5.0V PECL, E/D VE89: 3.3V PECL, E/D REV A TEMP. RANGE (°°C) LV: 0…50 LZ: 0…+70 HZ: -20…+70 D3: -40…+85 PULLABILITY (PPM) 25:±25 ppm 30:±30 ppm 50:±50 ppm 80:±80 ppm 100:±100 ppm 150:±150 ppm FREQUENCY (MHz) 70.000…207.000 OPTIONS SUFFIX C: COMP. OUTPUT T: 45…55 DUTY EL (See note 2) NOTE: 1.Variations from standard specification are available, please contact factory. 2.EL is added at the end of the part number for all PECL vcxo’s with enable/disable option. 3/6/02rketing-rfq, vcxo EXAMPLE: VE8950A-LZ-100-155.520-T-C-EL RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: +001(305) 593-6033 ! fax: +001(305)594-3973 ! e-mail: [email protected] ! internet: http:/www.raltron.com