FEC30 SERIES 30 WATTS DC-DC CONVERTER FEATURES • 30 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 6A • STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE • HIGH EFFICIENCY UP TO 90% • 2:1 WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • OFFER SINGLE AND DUAL OUTPUT • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The FEC30 series offer 30 Watts of output power from a 2.00 x 1.60 x 0.40 inch package. The FEC30 series with 2:1 wide input voltage of 9~18VDC, 18~36VDC and 36~75VDC and features 1600VDC of isolation, short-circuit and over-voltage protection. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Output power 30 Watts, max. Voltage accuracy ± 1% Minimum load 0% Voltage adjustability ± 10% ± 0.2% ± 0.5% ± 0.5% ± 1% ± 5% Single Dual Single Load regulation No Load to Full Load Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL Line regulation Ripple and noise LL to HL at Full Load 20MHz bandwidth (Measured with a 0.1µF/50V MLCC) See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change Short circuit protection 300µs 3.9VDC 3.9VDC 3.9VDC 3.9VDC 6.2VDC 15VDC 18VDC 150%, max. 1.5VDC output 1.8VDC output 2.5VDC output Over voltage protection 3.3VDC output Zener diode clamp 5VDC output 12VDC output 15VDC output Over load protection % of FL at nominal input Continuous, automatics recovery Efficiency Isolation resistance See table Input to Output Input (Output) to Case 500VDC 1600VDC, min. 1minute 1600VDC, min. 1minute 9 10 ohms, min. Isolation capacitance 1000pF, max. Switching frequency 300kHz±10%. Design meets safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Dimensions Epoxy (UL94-V0) 2.00 X 1.60 X 0.40 Inch (50.8 X 40.6 X 10.2 mm) Weight MTBF (Note 1) Page 1 of 3 12VDC nominal input 24VDC nominal input 48VDC nominal input 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC L-C type 36VDC 100ms,max 50VDC 100ms,max 100VDC 100ms,max 30mAp-p Power up 25mS Remote ON/OFF 25mS 9VDC 17.8VDC 36VDC 8VDC 16VDC 33VDC Input filter 12VDC input 24VDC input 48VDC input Input reflected ripple current Nominal input and Start up time constant resistive load 12VDC input Start-up voltage 24VDC input 48VDC input 12VDC input Shutdown voltage 24VDC input 48VDC input Remote ON/OFF (Note 6) (Positive logic) DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Input current of remote control pin Nominal input -0.5mA ~ 0.5mA 2.5mA Remote off state input current Nominal input Input surge voltage ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Maximum case temperature Storage temperature range GENERAL SPECIFICATIONS Isolation voltage Input voltage range 48g (1.69oz) BELLCORE TR-NWT-000332 MIL-HDBK-217F 1.316 x 106 hrs 3.465 x 105 hrs -40ºC ~ +85ºC (with derating) 100ºC -55ºC ~ +125ºC Over temperature protection 115ºC Thermal impedance Natural convection 10ºC/Watt (Note 7) Natural convection with heat-sink 8.24ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 8) EN55022 ESD EN61000-4-2 Radiated immunity Class A, Class B Air ± 8kV Perf. Criteria B Contact ± 6kV EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 9) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 9) EN61000-4-5 ± 1kV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com 2013/5/3 FEC30 SERIES 30 WATTS Model Number Input Range Output Voltage FEC30-12S1P5 FEC30-12S1P8 FEC30-12S2P5 FEC30-12S3P3 FEC30-12S05 FEC30-12S12 FEC30-12S15 FEC30-12D12 FEC30-12D15 FEC30-24S1P5 FEC30-24S1P8 FEC30-24S2P5 FEC30-24S3P3 FEC30-24S05 FEC30-24S12 FEC30-24S15 FEC30-24D12 FEC30-24D15 FEC30-48S1P5 FEC30-48S1P8 FEC30-48S2P5 FEC30-48S3P3 FEC30-48S05 FEC30-48S12 FEC30-48S15 FEC30-48D12 FEC30-48D15 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC Output Current Min. load Full load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 6000mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA ±1250mA ±1000mA 6000mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA ±1250mA ±1000mA 6000mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA ±1250mA ±1000mA DC-DC CONVERTER (2) (3) (4) Output No load Ripple & Noise Input Current 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p (5) Eff (%) 100mA 100mA 110mA 115mA 95mA 170mA 210mA 60mA 40mA 50mA 35mA 45mA 50mA 50mA 80mA 90mA 30mA 30mA 20mA 20mA 25mA 30mA 35mA 35mA 55mA 20mA 20mA Capacitor Load max 78 81 83 85 87 88 88 87 87 80 82 84 86 88 89 89 88 88 81 83 85 87 89 90 90 88 88 85800µF 65000µF 33000µF 19500µF 10200µF 3240µF 1100µF ±1020µF ±675µF 85800µF 65000µF 33000µF 19500µF 10200µF 3300µF 1100µF ±1020µF ±675µF 85800µF 65000µF 33000µF 19500µF 10200µF 3300µF 1100µF ±1020µF ±675µF Note FEC30-48S05 Derating Curve 120 100 80 60 40 20 0 100 80 60 40 20 0 -40 -20 0 20 62.9 40 60 80 100 120 -40 AMBIENT TEMPERATURE(℃) FEC30-48S05 Efficiency VS Input Voltage 90 88 86 84 82 80 36 40 44 48 52 56 60 64 68 95 90 85 80 75 70 65 60 55 50 45 0 20 40 60 69.4 80 100 120 FEC30-48S05 Efficiency VS Output Load 10 72 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) INPUT VOLTAGE (V) Page 2 of 3 -20 AMBIENT TEMPERATURE(℃ ) E F F IC IE N C Y (% ) EFFIC IEN C Y(% ) 92 FEC30-48S05 (Note Derating 7) Curve With Heatsink (Note 4 ) 120 O U T P U T P O W E R (% ) O U T P U T P O W E R (% ) 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input and full load. (20MHZ BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. The CTRL pin voltage is referenced to -INPUT. 7. Heat-sink is optional and P/N: 7G-0011C-F. 8. The FEC30 series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. www.pduke.com 2013/5/3 FEC30 SERIES 30 WATTS DC-DC CONVERTER MECHANICAL DRAWING 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION EXTERNAL OUTPUT TRIMMING PIN SINGLE DUAL 1 2 4 5 6 7 8 + INPUT - INPUT CTRL NO PIN + OUTPUT - OUTPUT TRIM + INPUT - INPUT CTRL + OUTPUT COMMON - OUTPUT TRIM Page 3 of 3 Output can be externally trimmed by using the method shown below. ( ) for dual output trim TRIM UP TRIM DOWN 7(7) 8(8) RU 8(8) www.pduke.com RD 6(5) 2013/5/3