40W Desk Top Type I.T.E. Power Supplies SPU40 series Features: Wide Operating Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Optional Output Connector (See page appendix) Over Voltage Protection (Crowbar Design) Single Output Energy Star 2.0, Efficiency level V Approved as Limited Power Source (LPS) Class I 2 year warranty Electrical Characteristics: Safety Approvals Input Voltage Range 100~240VAC Operate Voltage Range 90~264VAC fin Input Frequency 47~63Hz Po Output Power Range See rating chart Vo Output Voltage Range See rating chart Io Output Current Range Iil Input Current (Low Line) Io=Full load, Vin=100VAC 1.0A Iih Input Current (High Line) Io=Full load, Vin=240VAC 1.0A Low Line Inrush Current Io=Full load, 25°C, Cool start, Vin=115VAC 25A (max.) High Line Inrush Current Io=Full load, 25°C, Cool start, Vin=230VAC 50A (max.) Efficiency Io=Full Load, Vin=230VAC 78~90% Line Regulation Io=Full Load 0.5~1% Vin=230VAC 3~5% Vin Ir Eff REG-i REG-o Load Regulation See rating chart Over Voltage Protection 112~132% OCP Over Current Protection 110~150% Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4mS (max.) Th Hold-Up Time Io=Full Load, Vin=110VAC 12mS (min.) Ts Start Up Time Io=Full Load, Vin=100VAC 2S (max.) Ripple & Noise(Peak to Peak) Full Load, Vin=90VAC 1% (max.) 0.75mA (max.) Ilk Safety Ground Leakage Current Vin=240VAC/60Hz TC Temperature Coefficient All output ±0.04%/°C Pno No-Load Power Consumption No load, Vin=230VAC See rating chart Primary to secondary 4242VDC (min.) Primary to PE 2414VDC (min.) Test Voltage=500VDC 50M Vps Vpg Ris Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to PE Isolation Resistance (min.) Environmental To Operating Temperature See derating curve Ts Storage Temperature -40~85°C Ho Operating Humidity 0~95% Hr Storage Humidity 0~95% Operating Temperature at 25°C,Calculated per MIL-HDBK-217F 0.1M Hrs (min.) MTBF Pd Derate linearly from 100% load at 40°C to 50% load at 70°C - POS System - AV Equipment - Industrial PC - Note PC - Charger - LED Lighting Safety Approvals: S&E OVP Vp-p Application: RoHS 2002/95/EC COMPLIANT UL/c-UL(UL 60950-1:2nd Edition) TUV/GS(EN 60950-1:2nd Edition) The SPU40-102 is available on KC mark (Korea Certification). 40W Desk Top Type I.T.E. Power Supplies SPU40 series Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage Output Current Total Regulation Max . Output Power Pno (max.) SPU40-102 5 ~ 6 VDC 5.00 ~ 4.16 A 5% 25W 0.5W SPU40-103 6 ~ 8 VDC 4.28 ~ 3.75 A 5% 30W 0.5W SPU40-104 8 ~ 11 VDC 4.37 ~ 3.18 A 5% 35W 0.5W SPU40-105 11 ~ 13 VDC 3.63 ~ 3.07 A 5% 40W 0.3W SPU40-106 13 ~ 16 VDC 3.07 ~ 2.50 A 4% 40W 0.3W SPU40-107 16 ~ 21 VDC 2.50 ~ 1.90 A 4% 40W 0.3W SPU40-108 21 ~ 27 VDC 1.90 ~ 1.48 A 3% 40W 0.3W SPU40-109 27 ~ 33 VDC 1.48 ~ 1.21 A 3% 40W 0.3W SPU40-110 33 ~ 40 VDC 1.21 ~ 1.00 A 3% 40W 0.3W SPU40-111 40 ~ 50 VDC 1.00 ~ 0.80 A 3% 40W 0.3W SPU40-102~105 are required to use AWG#16/4FT output cable. S PU40-106~111 are required to use AWG#18/4FT output cable. The regulation will be changed by modified output cable. Mechanical Specifications: Note: 1. Dimensions are shown in mm. 2. Weight: 275gs approx. 3. Optional output connector: See page Appendix. Derating Curve : 1. Operating Temperature: 0 to 70°C 2. Derate linearly from 100% load at 40°C to 50% load at 70°C 120% Output Watts (%) 100% 80% 60% 40% 20% 0% 0 10 20 30 40 50 Temperature (deg c) 60 70 80