FKC12 SERIES 12 WATTS DC-DC CONVERTER FEATURES • 12 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 3.5A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 88% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY (400kHz) • STANDARD 24 PIN DIP PACKAGE • I/O ISOLATION 1600 VDC • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment SMD TYPE DESCRIPTION The FKC12 series offer 12 watts of output power from a package in an IC compatible 24pin DIP configuration. FKC12 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The FKC12 have features 1600VDC of isolation, short circuit protection and as well as five sided shielding. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Output power 12 Watts, max. Voltage accuracy ±1.2% Minimum load 0% Single LL to HL at Full Load Line regulation Dual Single (DIP) No Load to Full Single (SMD) Load regulation Load Dual (SMD,DIP) (2.5Vo only) Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth Temperature coefficient ± 0.5% ± 1% ± 1% ± 1% ± 5% See table ±0.02% / ºC, max. Transient response recovery time 25% load step change 2.5VDC output Over voltage protection 3.3VDC output Zener diode clamp 5.1VDC output (only single) 12VDC output 15VDC output Over load protection % of FL at nominal input Short circuit protection ± 0.2% ± 0.5% 250µs 3.9VDC 3.9VDC 6.2VDC 15VDC 18VDC 150% Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Input to Output Isolation voltage Input(Output) to Case Isolation resistance 500VDC 12VDC nominal input 24VDC nominal input 48VDC nominal input 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Pi type 36VDC 100ms, max. 50VDC 100ms, max. 100VDC 100ms, max. 20mAp-p Input filter 12VDC input 24VDC input 48VDC input Input reflected ripple current Nominal input and Power up 450ms Start up time constant resistive load 12VDC input 9VDC Start-up voltage 24VDC input 18VDC 36VDC 48VDC input 12VDC input 8VDC Shutdown voltage 24VDC input 16VDC 48VDC input 33VDC Remote ON/OFF (Note 5) (Positive logic) DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Input current of remote control pin Nominal input -0.5mA ~ 0.5mA Remote off state input current Nominal input 2.5mA Input surge voltage ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +85ºC (with derating) Maximum case temperature See table 1600VDC, min. 1minute DIP 1600VDC, min. 1minute SMD 1000VDC, min. 1minute 9 10 ohms, min. Isolation capacitance 1200pF, max. Switching frequency 400kHz±10% Design meet safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch Dimensions (31.8 X 20.3 X 10.2 mm) Weight 18g (0.62oz) BELLCORE 2.750 x 106 hrs MTBF (Note 1) TR-NWT-000332 7.575 x 105 hrs MIL-HDBK-217F Page 1 of 3 Input voltage range 100ºC Storage temperature range Thermal impedance -55ºC ~ +125ºC Nature convection 20ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 6) EN55022 ESD EN61000-4-2 Radiated immunity Class A, Class B Air Contact ± 8kV ± 6kV Perf. Criteria A EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 7) EN61000-4-4 ± 2kV Perf. Criteria A Surge (Note 7) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com 2013/6/4 FKC12 SERIES 12 WATTS Model Number Input Range DC-DC CONVERTER Output Current Output Output Voltage Min. load Full load Ripple & Noise FKC12-12S2P5 9 ~ 18 VDC 2.5 VDC 0mA 3500mA 85mVp-p FKC12-12S3P3 9 ~ 18 VDC 3.3 VDC 0mA 3500mA 85mVp-p FKC12-12S05 9 ~ 18 VDC 5.1 VDC 0mA 2400mA 85mVp-p FKC12-12S12 9 ~ 18 VDC 12 VDC 0mA 1000mA 85mVp-p FKC12-12S15 9 ~ 18 VDC 15 VDC 0mA 800mA 85mVp-p FKC12-12D05 9 ~ 18 VDC ± 5 VDC 0mA ± 1200mA 85mVp-p FKC12-12D12 9 ~ 18 VDC ± 12 VDC 0mA ± 500mA 85mVp-p FKC12-12D15 9 ~ 18 VDC ± 15 VDC 0mA ± 400mA 85mVp-p FKC12-24S2P5 18 ~ 36 VDC 2.5 VDC 0mA 3500mA 85mVp-p FKC12-24S3P3 18 ~ 36 VDC 3.3 VDC 0mA 3500mA 85mVp-p FKC12-24S05 18 ~ 36 VDC 5.1 VDC 0mA 2400mA 85mVp-p FKC12-24S12 18 ~ 36 VDC 12 VDC 0mA 1000mA 85mVp-p FKC12-24S15 18 ~ 36 VDC 15 VDC 0mA 800mA 85mVp-p FKC12-24D05 18 ~ 36 VDC ± 5 VDC 0mA ± 1200mA 85mVp-p FKC12-24D12 18 ~ 36 VDC ± 12 VDC 0mA ± 500mA 85mVp-p FKC12-24D15 18 ~ 36 VDC ± 15 VDC 0mA ± 400mA 85mVp-p FKC12-48S2P5 36 ~ 75 VDC 2.5 VDC 0mA 3500mA 85mVp-p FKC12-48S3P3 36 ~ 75 VDC 3.3 VDC 0mA 3500mA 85mVp-p FKC12-48S05 36 ~ 75 VDC 5.1 VDC 0mA 2400mA 85mVp-p FKC12-48S12 36 ~ 75 VDC 12 VDC 0mA 1000mA 85mVp-p FKC12-48S15 36 ~ 75 VDC 15 VDC 0mA 800mA 85mVp-p FKC12-48D05 36 ~ 75 VDC ± 5 VDC 0mA ± 1200mA 85mVp-p FKC12-48D12 36 ~ 75 VDC ± 12 VDC 0mA ± 500mA 85mVp-p FKC12-48D15 36 ~ 75 VDC ± 15 VDC 0mA ± 400mA 85mVp-p NOTE: 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input voltage and no load. 3. Typical value at nominal input voltage and full load. 4. Test by minimum input and constant resistive load. 5. The ON/OFF control pin voltage is referenced to –INPUT. 6. The FKC12 series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF /100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. Page 2 of 3 www.pduke.com (2) No load Input Current 50mA 60mA 53mA 15mA 17mA 24mA 19mA 24mA 36mA 36mA 35mA 16mA 17mA 15mA 15mA 18mA 10mA 14mA 23mA 11mA 5mA 6mA 6mA 6mA (3) (4) Eff (%) Capacitor Load max 82 84 86 86 86 82 87 87 83 85 87 87 87 83 88 88 83 85 87 87 87 83 88 88 2000µF 2000µF 2000µF 430µF 300µF ± 1250µF ± 200µF ± 120µF 2000µF 2000µF 2000µF 430µF 300µF ± 1250µF ± 200µF ± 120µF 2000µF 2000µF 2000µF 430µF 300µF ± 1250µF ± 200µF ± 120µF 2013/6/4 FKC12 SERIES 12 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION SMD PIN CONNECTION PIN 1 2 3 SINGLE CTRL -INPUT -INPUT DUAL CTRL -INPUT -INPUT PIN SINGLE DUAL 23 22 +INPUT +INPUT +INPUT +INPUT 9 11 NC NC COMMON -OUTPUT 16 14 -OUTPUT +OUTPUT COMMON +OUTPUT Page 3 of 3 PIN 1 2 3 SINGLE CTRL -INPUT -INPUT DUAL CTRL -INPUT -INPUT PIN SINGLE DUAL 23 22 +INPUT +INPUT +INPUT +INPUT 9 11 Others NC NC NC COMMON -OUTPUT NC 16 14 -OUTPUT +OUTPUT COMMON +OUTPUT www.pduke.com 2013/6/4