40W Desk Top Type Industrial Power Supplies IPU40 series Features: Wide Operating Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Optional Output Connector (See page appendix) Over Voltage Protection (Crowbar Design) Single Output Energy Star 2.0, Efficiency level V Approved as Limited Power Source (LPS) Class I Operating temperature -20~70°C 3 year warranty Electrical Characteristics: Safety Approvals Input Voltage Range 100~240VAC Operate Voltage Range 90~264VAC fin Input Frequency 47~63Hz Po Output Power Range See rating chart Vo Output Voltage Range See rating chart Io Output Current Range Iil Input Current (Low Line) Io=Full load, Vin=100VAC 1.0A Iih Input Current (High Line) Io=Full load, Vin=240VAC 1.0A Low Line Inrush Current Io=Full load, 25°C, Cool start, Vin=115VAC 25A (max.) High Line Inrush Current Io=Full load, 25°C, Cool start, Vin=230VAC 50A (max.) Efficiency Io=Full Load, Vin=230VAC 78~90% Line Regulation Io=Full Load 0.5~1% Vin=230VAC 3~5% Vin Ir Eff REG-i REG-o Load Regulation See rating chart Application: - POS System - AV Equipment - Industrial PC - Note PC - Charger - LED Lighting Safety Approvals: S&E OVP Over Voltage Protection 112~132% OCP Over Current Protection 110~150% RoHS 2002/95/EC Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4mS (max.) Th Hold-Up Time Io=Full Load, Vin=110VAC 12mS (min.) Ts Start Up Time Io=Full Load, Vin=100VAC 2S (max.) Ripple & Noise(Peak to Peak) Full Load, Vin=90VAC 1% (max.) Ilk Safety Ground Leakage Current Vin=240VAC/60Hz 0.75mA (max.) TC Temperature Coefficient All output ±0.04%/°C Pno No-Load Power Consumption No load, Vin=230VAC See rating chart Primary to secondary 4242VDC (min.) Primary to PE 2414VDC (min.) Test Voltage=500VDC 50M Vp-p Vps Vpg Ris Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to PE Isolation Resistance (min.) Environmental To Operating Temperature See derating curve Ts Storage Temperature -40~85°C Ho Operating Humidity 0~95% Hr Storage Humidity 0~95% Operating Temperature at 25°C,Calculated per MIL-HDBK-217F 0.1M Hrs (min.) MTBF Pd Derate linearly from 100% load at 40°C to 50% load at 70°C COMPLIANT UL/c-UL(UL 60950-1:2nd Edition) TUV/GS(EN 60950-1:2nd Edition) 40W Desk Top Type Industrial Power Supplies IPU40 series Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage Output Current Total Regulation Max . Output Power Pno (max.) IPU40-102 5 ~ 6 VDC 5.00 ~ 4.16 A 5% 25W 0.5W IPU40-103 6 ~ 8 VDC 4.28 ~ 3.75 A 5% 30W 0.5W IPU40-104 8 ~ 11 VDC 4.37 ~ 3.18 A 5% 35W 0.5W IPU40-105 11 ~ 13 VDC 3.63 ~ 3.07 A 5% 40W 0.3W IPU40-106 13 ~ 16 VDC 3.07 ~ 2.50 A 4% 40W 0.3W IPU40-107 16 ~ 21 VDC 2.50 ~ 1.90 A 4% 40W 0.3W IPU40-108 21 ~ 27 VDC 1.90 ~ 1.48 A 3% 40W 0.3W IPU40-109 27 ~ 33 VDC 1.48 ~ 1.21 A 3% 40W 0.3W IPU40-110 33 ~ 40 VDC 1.21 ~ 1.00 A 3% 40W 0.3W IPU40-111 40 ~ 50 VDC 1.00 ~ 0.80 A 3% 40W 0.3W IPU40-102~105 are required to use AWG#16/4FT output cable. IPU40-106~111 are required to use AWG#18/4FT output cable. The regulation will be changed by modified output cable. Mechanical Specifications: Note: 1. Dimensions are shown in mm. 2. Weight: 275gs approx. 3. Optional output connector: See page Appendix. Derating Curve : 120% 1. Operating Temperature: -20 to 70°C 2. Derate linearly from 100% load at 40°C to 50% load at 70°C Output Watts (%) 100% 80% 60% 40% 20% 0% -20 0 10 20 30 40 Temperature (deg c) 50 60 70 80