EFE-300M - RSG Electronic Components GmbH

EFE300M / EFE400M
www.uk.tdk-lambda.com/efe-m
Medical
Industrial
Test
Broadcast
Comms
300W and 400W, High Density
AC-DC, digital power solution
Renewable
Features
Benefits
• Reinforced isolation
Simplifies equipment design
• Full Digital Control
Improves Product Performance
• High Efficiency
Minimises heat in system
• Temperature controlled fan option
Reduces noise in system
• 5 Year Warranty
Low cost of ownership
Input
Input Voltage
90-264Vac
Input Frequency
45 - 63Hz
(440Hz with reduced PFC - consult factory)
Input Harmonics
EN61000-3-2 compliant
Power Factor
0.97 typical
Input Fuse
Dual fuses (Live + Neutral)
Fast acting (not user accessible)
Inrush Current
<40A at 25°C and 230Vac (cold start)
(meets EN61000-3-3). <50A for EFE400M
Earth Leakage Current
123µA at 120Vac (60Hz), 257µA max at 240Vac (60Hz)
Worst case leakage current is less than 300µA at 264Vac, 63Hz (normal condition, 0.5mA Single Fault Condition)
Quick Selector (Standard models). Additional variants available - see below
Output
Current
Voltage
12V
24V
48V
Units without fan
Open Frame
Description
Order Code
Units with end fan
Cover + Chassis
Description
Order Code
Cover + Chassis
Description
Order Code
25A
EFE300M-12-5-HNMDL-YT
U5Y0020
EFE300M-12-5-HCMDL-YT
33.3A
EFE400M-12-5-HNMDL-YT
U6Y001H
EFE400M-12-5-HCMDL-YT
12.5A
EFE300M-24-5-HNMDL-YT
U5Y0053
EFE300M-24-5-HCMDL-YT
16.7A
EFE400M-24-5-HNMDL-YT
U6Y002J
EFE400M-24-5-HCMDL-YT
6.25A
EFE300M-48-5-HNMDL-YT
U5Y0201
8.3A
EFE400M-48-5-HNMDL-YT
U6Y003K
U5Y001Z
EFE300M-12-5-ECMDL-YT
U5Y0031
U6Y004L
EFE400M-12-5-ECMDL-YT
U6Y007P
U5Y0042
EFE300M-24-5-ECMDL-YT
U5Y0064
U6Y005M
EFE400M-24-5-ECMDL-YT
U6Y008q
EFE300M-48-5-HCMDL-YT
U5Y0223
EFE300M-48-5-ECMDL-YT
U5Y0166
EFE400M-48-5-HCMDL-YT
U6Y006N
EFE400M-48-5-ECMDL-YT
U6Y009R
How To Create A Product Description
Output Factory Setting Range
EFE300M EFE400M
12 11.4 - 13.2V 11.4 - 13.2V
24 22.8 - 26.4V 22.8 - 26.4V
28
27 - 32V
48
47-50V
47-50V
50
50-54V
Required output voltage must
be specified at time of ordering
Standby Voltage
5 = 5V / 2A
12 = 12V / 1A
-HN
-HU
-HC
-EC
-NN
-NU
-NC
Case / Fan Option
Open frame, no fan, with 12V / 1A fan supply
U chassis, no fan, with 12V / 1A fan supply
Cover+chassis, no fan, with 12V / 1A fan supply
Cover+chassis, end fan (temp controlled)
Open frame, no fan, no fan supply
U chassis, no fan, no fan supply
Cover+chassis, no fan, no fan supply
-Y = ORing FET included
blank = right angled
-V = vertical
EFE300MCase/Fan
Input
D - Dual Earth ORing Remote Output
Vout - Standby
or
Option Connector Fused Leakage FET Of/Off Connector
EFE400M-
Confirm availability of created product with the factory
M = Molex
(see connection drawings for details)
EFE300M / EFE400M
L = 300µA
E = Enable
T = Inhibit
1
Isolation
Input to Output
Reinforced
2 x MOPPs (3rd edition 60601)
4kVac, 5.7kVdc type tested to 4kVac (equivalent to 5.7kVdc), production tested to 4.3kVdc.
Input to Earth
Basic
1.5kVac, 2.3kVdc
Output to Earth
1.5kVac
Output Specification
Output Power
Peak Power
Total Regulation
EFE300M
300W
EFE400M
400W
400W
530W
better than 4%
Continuous (including fan supply) or RMS (including Peak power)
EFE400M derates below 100Vac input and units fitted with fan, vertical output connector, ORing FET
derate. See handbook for details.
EFE300M - for 10 seconds. Outputs above 36V, 350W.
EFE400M - for 10 seconds. No peak power for outputs 47V and above.
Including Line (for 90-264Vac input change), Load (for 0-100% load change)
and temperature (0-50°C)
Ripple & Noise
1.5%
pk-pk, using EIAJ test method & 20MHz bandwidth
Voltage Setting Accuracy
±1%
at 50% load
Turn on Time
1.5s max
at 90 Vac & 100% rated output power
Efficiency
90%
typical. 87% typical if Standby Supply is fully loaded
Hold up
16ms
typical at 90 Vac, 75% load
Min Load
None
Transient Response
<5%
of set voltage for 50% load change
Recovery
<1ms
for recovery to 2% of set voltage
(in 50µs within the range 25 - 100% load)
Short circuit protection
Yes
Auto recovery after removal of short circuit
Over Temperature protection
Yes
Primary - auto recovers, secondary - cycle power to restart
Over Voltage Protection
Yes
Latching, need to cycle ac to restart unit.
Fan supply
12V / 1A
Depending on ‘Case/Fan Option’ selected. See previous page for details
Global Signals
Remote on/off
Enable - TTL logic level low (relative to Standby 0V) enables channel 1 and fan supply
Inhibit - TTL logic level low (relative to Standby 0V) inhibits channel 1 and fan supply
Standby Supply
5V / 2A or 12V / 1A, isolated supply, not affected by remote on/off.
Power Good
Logic high indicates ac supply is good and Ch1 is within regulation
ORing FET
Allows redundant connection of power supplies with no additional diodes required.
Environment
Temperature
0°C to 50°C operational, -40°C to 70°C storage (max 12 months).
Full load, with 2m/s air blown from input to output (approximately 10CFM)
Derating
50°C to 70°C derate each output by 2.5% per °C
Low Temp Startup
-20°C
Humidity
5 - 95% RH non condensing
Shock
±3 x 30g shocks in each plane, total 18 shocks
30g shock = 11ms (+/-0.5msec), half sine
Conforms to EN60068-2-27, EN60068-2-47, IEC68-2-27, IEC68-2-47, JIS C0041-1987.
Conforms to MIL-STD-810E/F, Method 516.5, Pro I, IV, VI
Vibration
Single axis 10 - 500 Hz at 2g (sweep and endurance at resonance) in all 3 planes
Conforms to EN60068-2-6, IEC68-2-6
Conforms to MIL-STD-810E, Method 514.4, Pro I, Cat 1,9
Altitude
Medical approval = -200 to 3000 metres operational (-200 to 5000m storage/transportation)
Non medical approval = -200 to 5000a metres operational (-200 to 5000m storage/transportation)
Pollution
a - non open frame EFE400M units = -200 to 4000 metres
Degree 2, Material group IIIb
Emissions EN61000-6-3:2007, EN60601-1-2:2001
Radiated Electric Field
EN55011, EN55022
Conducted Emissions
EN55011, EN55022
(as per CISPR.11/22) Class B, FCC47 part 15 subpart B
Conducted Harmonics
EN61000-3-2
Class A
Class C - EFE300M at 100W and above
Flicker
EN61000-3-3
Compliant - dmax only
2
(as per CISPR.11/22) Class B, FCC47 part 15 subpart B
see application note for details
EFE300M / EFE400M
Immunity EN61000-6-2:2005
Criteria
Electrostatic Discharge
EN61000-4-2
Level 4
Air discharge 15kV, Contact discharge 8kV
Level 3 for Fan supply (-HN, -HU & -HC units only)
Not applicable to open frame units
A
Electromagnetic Field
EN61000-4-3
Level 3
12V/m
A
Fast / Burst Transient
EN61000-4-4
Level 4
ac input tested to 4.4kV
dc output tested to 2.2kV
A
Surge Immunity
EN61000-4-5
Level 3
Common mode - 2.2kV
Differential - 1.1kV
A
Conducted RF Immunity
EN61000-4-6
Level 3
12V
A
Power Frequency Magnetic Field
EN61000-4-8
Level 4
30A/m
A
Voltage Dips, Variations, Interruptions
EN61000-4-11
Class 3
Criteria B for 5 sec interruption
Criteria B for 1 cycle interruption
A
Ring Wave
EN61000-4-12
Level 3
Common mode - 2.2kV
Differential - 1.1kV
A
Voltage Fluctuations
EN61000-4-14
Class 3
A
Safety Approvals
Notes
IEC/EN 60950-1, UL60950-1 / CSA 22.2 No 60950-1
File E135494
IEC/EN 60601-1, UL/CSA 60601-1, ANSI/AAMI ES60601-1
CAN/CSA-C22.2 No 60601-1-08
File E349607
IEC/EN 61010-1
EFE300M approved (File E331788), EFE400M designed to meet
CE Mark (EN60950-1)
LV Directive 2006/95/EC
CB certificate and Report available on request
Please check with technical sales for status of approvals
Outline & Connection Drawings
EFE300M (not -V version)
EFE400M (not -V version)

163.78
MATING PARTS (MOLEX OR EQUIVALENT)
PIN CONNECTION
152.40
1
EARTH
115.57
2
NOT CONNECTED
3
LIVE
4
NOT CONNECTED
5
NEUTRAL
18.42


A
5.72
A

CONNECTOR
HOUSING
CRIMP PIN
J1
09-50-8051
08-52-0113
J2
39-01-2200
44476-3112
A
6.13
CONNECTION
+V STANDBY
REMOTE ON/OFF
12 0V CH1
3
+V CH1
13 0V CH1
4
+V CH1
14 0V CH1
5
+V CH1
6
+V CH1
16 0V CH1
7
+V CH1
17 0V CH1
15 0V CH1
8
+V CH1
18 +12V FAN (NOTE*1)
9
N/C
PIN 11
A
PIN 1
A
PIN 20
A
7.85
CRIMP PIN
09-50-8051
08-52-0113
J2
39-01-2185
44476-3112
2.53
18.42
115.57

B
B
19.50
84.40
10.00
`U` CHANNEL
31.00
24.39
152.40
11.38
0V CH 1
0V CH 1
0V CH 1
0V CH 1
0V CH 1
0V CH 1
0V CH 1
+12V FAN
40.60
14.80
153.67
B
B
B
10.00
B
B
165.10
10.91
B
B
Note, connection details and outline
drawings for -v (vertical) connector
are different See handbook for details
Notes 1. All customer fixings M3
2. Maximum Penetration 4.5mm
3. Maximum torque 0.9Nm
4. All tolerances +/-0.5mm
13
14
15
16
17
18
19
20
B
B
FORWARD
AIRFLOW
4.00
A 4 OFF HOLES ∅3.5mm CLEARANCE FOR M3 FIXINGS.
B 8 OFF FIXING HOLES FOR M3, MAXIMUM PENETRATION 4.5mm,
MAXIMUM TORQUE 0.9Nm.
ALL TOLERANCES +/-0.5mm.
0V STANDBY
POWER GOOD
72.10

CONNECTION
11
12
41.91
B
4.00
NOTE:
PIN
15.72
5.72
77.72
B
65.02
59.40
FORWARD
AIRFLOW
3
4
5
6
7
8
9
10
B
9.60
31.00
+V STANDBY
REMOTE
ON/OFF
+V CH 1
+V CH 1
+V CH 1
+V CH 1
+V CH 1
+V CH 1
+V CH 1
+V CH 1
39.10
WITHOUT
COVER
14.80
B
9.60
20.30
CONNECTION
1
153.67
39.10
WITHOUT
COVER
B
19.50
LABEL
(CHASSIS WITH COVER)
PIN
115.57
40.60
18.42
EARTH
NOT CONNECTED
LIVE
NOT CONNECTED
NEUTRAL
2.99
3.40
J1
29.00
HOUSING
34.00
34.00
29.00
3.40
CONNECTOR
PIN 10
CONNECTION
1
2
3
4
5
J2
2
NOTE:*1 (J) MODEL PIN N/C
MATING PARTS (MOLEX OR EQUIVALENT)
PIN 1
J2
J1
33.70
1
2
88.90
77.72
PIN
11 POWER GOOD
PIN
37.71
5.59
PIN 1
CONNECTION
10 0V STANDBY
24.64
A
PIN
41.91
56.00
A

5.59
65.02
12.00
76.20



J1
97.10
A
176.01
165.10
153.67
B
NOTE:
FAN OPTION
20.30
A 5 OFF
HOLES 3.5mm CLEARANCE FOR M3 FIXINGS.
A
B 9 OFF M3 CUSTOMER FIXINGS, MAXIMUM PENETRATION 4.5MM
Connectors are not included with the product. They are available from TDK-Lambda
1 off input connector and 3 crimps are available as part number is 94910.
1 off output connector and 18 crimps are available as part number 94752. (EFE300M)
1 off output connector and 20 crimps are available as part number 94912 (EFE400M)
EFE300M / EFE400M
3
TDK-LAMBDA EMEA
www.emea.tdk-lambda.com
TDK-Lambda France SAS
TDK-Lambda UK Ltd.
ZAC des Delaches
CS 41077
9 rue Thuillere
91978 Villebon Courtaboeuf
France
Tel: +33 1 60 12 71 65
Fax: +33 1 60 12 71 66
france@fr.tdk-lambda.com
www.fr.tdk-lambda.com
Kingsley Avenue
Ilfracombe
Devon EX34 8ES
United Kingdom
Tel: +44 (0) 12 71 85 66 66
Fax: +44 (0) 12 71 86 48 94
powersolutions@uk.tdk-lambda.com
www.uk.tdk-lambda.com
Italy Sales Office
TDK-Lambda Ltd.
Via dei Lavoratori 128/130
20092 Cinisello Balsamo (MI)
Italy
Tel: +39 02 61 29 38 63
Fax: +39 02 61 29 09 00
info.italia@it.tdk-lambda.com
www.it.tdk-lambda.com
Kibbutz
Givat Hashlosha 48800
Israel
Tel: +9 723 902 4333
Fax: +9 723 902 4777
info@tdk-lambda.co.il
www.tdk-lambda.co.il
TDK-Lambda Germany GmbH
Russia
Karl-Bold-Strasse 40
77855 Achern
Germany
Tel: +49 7841 666 0
Fax: +49 7841 5000
info.germany@de.tdk-lambda.com
www.de.tdk-lambda.com
Technical Support:
St Petersburg
Tel: +7 (812) 6580463
Sales:
Moscow
Tel: +7 (499) 7557732
info@tdk-lambda.ru
www.tdk-lambda.ru
Austria Sales Office
Aredstrasse 22
2544 Leobersdorf
Austria
Tel: +43 2256 655 84
Fax: +43 2256 645 12
info.germany@de.tdk-lambda.com
www.de.tdk-lambda.com
Local Distribution
Distribution:
RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach / Germany
Tel. +49.69.984047-0 ■ Fax +49.69.984047-77 ■ info@rsg-electronic.de ■ www.rsg-electronic.de
Änderungen vorbehalten / subject to change without notice.
EFE300M_400M Rev 19 - 69930
4
EFE300M / EFE400M