PH480272T-006-I16Q - Scancraft Display is

TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
PTC
SAMPLE
CODE
:
SH480272T-006-I16Q
MASS PRODUCTION CODE
:
PH480272T-006-I16Q
SAMPLE VERSION
:
01
SPECIFICATIONS EDITION
:
002
DRAWING NO.
(Ver.)
:
LMD-PH480272T-006-I16Q (Ver.001)
PACKAGING NO.
(Ver.)
:
PKG-PH480272T-006-I16Q (Ver.001)
Customer Approved
Date:
Approved
Checked
Designer
黃秋源
Oliver Huang
李健弘
Lambert Lee
黃俊清
Ackey Huang
POWERTIP
2013.05.27
□
Preliminary specification for design input
■
Specification for sample approval
TW RD APR
POWERTIP TECH. CORP.
Headquarters:
th
No.8, 6 Road, Taichung Industrial Park,
TEL: 886-4-2355-8168
E-mail: [email protected]
FAX: 886-4-2355-8166
Http://www.powertip.com.tw
Taichung, Taiwan
台中市 407 工業區六路 8 號
NO.PT-A-005-8
History of Version
Date
(mm / dd / yyyy)
Ver. Edi.
Description
Page
Design by
03/04/2013
01
001
New Drawing.
-
Ackey
05/23/2013
01
002
New Sample.
-
Ackey
Total: 28 Page
PH480272T-006-I16Q
Page2
SAMPLE Ver.01
SPEC Edi.002
Contents
1. SPECIFICATIONS
1.1
1.2
1.3
1.4
1.5
1.6
1.7
Features
Mechanical Specifications
Absolute Maximum Ratings
DC Electrical Characteristics
Optical Characteristics
Backlight Characteristics
Touch Panel Characteristics
2. MODULE STRUCTURE
2.1 Counter Drawing
2.2 Interface Pin Description
2.3 Timing Characteristics
2.3.1 SPI Write
2.3.2 SPI Timing Table
2.4 Color Data Assignment
3. QUALITY ASSURANCE SYSTEM
3.1
3.2
Quality Assurance Flow Chart
Inspection Specification
4. RELIABILITY TEST
4.1
Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix:LCM Drawing
LCM Packaging Specifications
Note : For detailed information please refer to IC data sheet :
Primacy(TFT LCD): OTA5180A
PH480272T-006-I16Q
Page3
SAMPLE Ver.01
SPEC Edi.002
1. SPECIFICATIONS
1.1 Features
1.2
Item
Standard Value
Display Type
480 * 3 (RGB) * 272 Dots
LCD Type
a-Si TFT , Normally white , Transmissive type
Touch panel
True Multi-Touch Capacitive Touch Panel
True Multi-touch with up to 5 Points of Absolution
Screen size(inch)
4.3 inch
Viewing Direction
6 O’clock
Color configuration
RGB-Strip
Backlight Type
LED B/L
Weight
80 g
Interface
24 Bits RGB Interface
Other(controller/driver IC)
OTA5180A
(Or Compatible IC )
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news.php?area_id_view=1085560481/
Mechanical Specifications
Item
Standard Value
Unit
Outline Dimension(T/P)
115.1(W) x 73.9 (L) x 5.8(H)(MAX)
mm
Item
Standard Value
Unit
Active Area
95.04 (W) x 53.856 (L)
mm
Item
Standard Value
Unit
Viewing Area
97.1 (W) * 55.9 (L)
mm
LCD panel
Touch panel
Note : For detailed information please refer to LCM drawing
PH480272T-006-I16Q
Page4
SAMPLE Ver.01
SPEC Edi.002
1.3
Absolute Maximum Ratings
Module
1.4
Item
Symbol
Condition
Min.
Max.
Unit
System Power Supply Voltage
VDDIO
GND=0
-0.3
4.5
V
Operating Temperature
TOP
Excluded T/P
-20
+70
°C
Storage Temperature
TST
Excluded T/P
-30
+80
°C
DC Electrical Characteristics
GND = 0V, Ta = 25°C
Module
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
-
3.0
3.3
3.6
V
VIH
-
0.7VDDIO
-
VDDIO
V
VIL
-
0
-
0.3VDDIO
V
VOH
-
VDDIO-0.4
-
VDDIO
V
VOL
-
0
-
GND+0.4
V
VDDIO = 3.3 V
Pattern= Pattern display
-
15
-
mA
VDDIO = 3.3 V
Pattern= Red *1
-
15
20
mA
Power Supply Voltage VDDIO
Input H/L Level Voltage
Output H/L Level
Voltage
Supply Current
IDDIO
Note1:Maximum current display
PH480272T-006-I16Q
Page5
SAMPLE Ver.01
SPEC Edi.002
1.5
Optical Characteristics
VDDIO= 3.3 V, Ta=25°C
TFT LCD Module
Item
Symbol
Condition
Min.
Typ.
Max.
unit
-
Tr+Tf
25℃
-
-
30
45
ms
-
Top
θY+
-
45
-
Bottom
θY-
-
50
-
Left
θX-
-
50
-
Deg.
Note 4
Right
θX+
-
50
-
CR
200
250
-
-
Note 3
X
0.26
0.31
0.36
Y
0.29
0.34
0.39
0.50
0.55
0.60
0.33
0.39
0.44
0.30
0.35
0.40
-
Note1
Y
0.65
0.60
0.65
X
0.10
0.15
0.20
Y
0.06
0.11
0.16
Response time
Viewing angle
Contrast ratio
White
Red
Color of CIE
Coordinate
(With B/L&T/P) Green
Blue
X
Y
X
CR ≥ 10
Ta = 25°C
θX , θY = 0°
Average Brightness
Pattern=white display
(With B/L&T/P)*1
IV
IF= 20mA
220
300
-
Uniformity
(With B/L&T/P)*2
△B
IF= 20mA
70
-
-
PH480272T-006-I16Q
Page6
cd/m2 Note1
%
Note1
SAMPLE Ver.01
SPEC Edi.002
Note 1:
*1:△B=B(min) / B(max) * 100%
*2:Measurement Condition for Optical Characteristics:
a:Environment: 25℃±5℃ / 60±20%R.H,no wind,dark room below 10 Lux at typical lamp
current and typical operating frequency.
b:Measurement Distance: 500 ± 50 ㎜ ,(θ= 0°)
c:Equipment: TOPCON BM-7 fast,(field 1°),after 10 minutes operation.
d:The uncertainty of the C.I.E coordinate measurement ±0.01,Average Brightness ± 4%
1
2
3
VIEW AREA
6
5
4
7
8
θθ
9
500 ㎜
LCM
Colorimeter=BM-7 fast
To be measured at the center area of panel with a viewing cone of 1° by Topcon
luminance meter BM-7, after 10 minutes operation (module)
Note2: Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
Amplitudes.
Refer to figure as below:
Normally White
"White"
"Black"
"White"
Signal (Relative value)
100%
90%
10%
0%
Tr
PH480272T-006-I16Q
Tf
Page7
SAMPLE Ver.01
SPEC Edi.002
Normally Black
"Black"
"White"
"Black"
Signal (Relative value)
100%
90%
10%
0%
Tr
Tf
Note3: Definition of contrast ratio:
Contrast ratio is calculated with the following formula
Photo detector output when LCD is at “White” state
Contrast ratio (CR) =
Photo detector output when LCD is at “Black” state
Note4: Definition of viewing angle:
Refer to figure as below:
θX = θY = 0 °
12H
Φ = 180 °
Φ = 270 °
θY -
θY +
θY + = 9 0 °
θX - = 9 0 °
Y+
X-
θX θX +
Φ= 90 °
Φ
θX + = 9 0 °
X+
Y6 H
Φ= 0 °
θY - = 9 0 °
PH480272T-006-I16Q
Page8
SAMPLE Ver.01
SPEC Edi.002
1.6
Backlight Characteristics
Maximum Ratings
Item
Symbol
Conditions
Min.
Max.
Unit
LED Forward Current
IF
Ta =25℃
-
30
mA
LED Reverse Voltage
VR
Ta =25℃
-
1
V
Power Dissipation
PD
Ta =25℃
-
360
mW
Electrical / Optical Characteristics
Item
Symbol
Forward Voltage
Average Brightness
(Without LCD &T/P)
CIE Color Coordinate
(Without LCD &T/P)
Conditions
Min.
Typ.
Max.
Unit
VF
-
22.8
-
V
IV
5900
6400
-
cd/m2
X
0.26
-
0.34
Y
0.26
-
0.34
IF=20mA
Color
PH480272T-006-I16Q
-
White
Page9
SAMPLE Ver.01
SPEC Edi.002
1.7
Touch Panel Characteristics
Features
Item
Standard Value
Touch Panel Size
4.3”
Touch type
True Multi-Touch Capacitive Touch Panel
Input Method
True Multi-touch with up to 5 Points of Absolution X and Y Coordinates
Output Interface
I 2C
IC
FT5216
Mechanical Specifications
Item
Standard Value
Unit
Viewing Area
97.10 mm (W) x 55.90 mm (H)
mm
Number of sensing channel
16 (W) x 10 (H)
mm
Absolute Maximum Ratings
Item
Symbol
Condition
Min.
Max.
Unit
Supply voltage
VDD
-
-0.3
3.6
V
Operating Temperature
TOP
-
-20
+70
°C
Storage Temperature
TST
-
-30
+80
°C
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Power Supply Voltage
VDD
-
3.0
3.3
3.6
V
DC Electrical Characteristics
PH480272T-006-I16Q
Page10
SAMPLE Ver.01
SPEC Edi.002
I2C Serial Data Transfer Format
I2C master write, slave read
I2C master read, slave write
Timing Characteristics
PH480272T-006-I16Q
Page11
SAMPLE Ver.01
SPEC Edi.002
Power on time
Power on Sequence
Reset Sequence
Power on / Reset Sequence Parameters
PH480272T-006-I16Q
Page12
SAMPLE Ver.01
SPEC Edi.002
2. MODULE STRUCTURE
2.1
Counter Drawing
2.1.1
LCM Mechanical Diagram
* See Appendix
2.1.2
Block Diagram
Pixel1
Line 1 RGB
Pixel 480
---------------------------------------------
RGB
Line 272 RGB
---------------------------------------------
……………………
……………………
TFT LCD Panel
480RGB X 272 DOTS
LED
Backlight
RGB
1
Touch
Panel
Ground
2
SDA
3
SCL
4
VDD
5
HX8257-A
Single Chip Digital Driver
(T-CON)
6
XRES
K
A
CSB
VDDIO
R0
R1
R2
R3
R4
R5
R6
R7
G0
G1
G2
G3
G4
G5
G6
G7
B0
B1
B2
B3
B4
B5
B6
B7
GND
CLK
RESETB
HSYNC
VSYNC
SDI
SCK
GND
NC
NC
NC
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
OTA5180
INT
PH480272T-006-I16Q
Page13
SAMPLE Ver.01
SPEC Edi.002
2.2
Interface Pin Description
Pin No.
Symbol
1
K
Power supply for LED Backlight cathode input
2
A
Power supply for LED Backlight anode input
3
CSB
4
VDDIO
Digital power
5
R0
Red data bit 0
6
R1
Red data bit 1
7
R2
Red data bit 2
8
R3
Red data bit 3
9
R4
Red data bit 4
10
R5
Red data bit 5
11
R6
Red data bit 6
12
R7
Red data bit 7
13
G0
Green data bit 0
14
G1
Green data bit 1
15
G2
Green data bit 2
16
G3
Green data bit 3
17
G4
Green data bit 4
18
G5
Green data bit 5
19
G6
Green data bit 6
20
G7
Green data bit 7
21
B0
Blue data bit 0
22
B1
Blue data bit 1
23
B2
Blue data bit 2
24
B3
Blue data bit 3
25
B4
Blue data bit 4
26
B5
Blue data bit 5
27
B6
Blue data bit 6
28
B7
Blue data bit 7
PH480272T-006-I16Q
Function
Chip select pin of serial interface.
Page14
SAMPLE Ver.01
SPEC Edi.002
Pin No.
Symbol
Function
29
GND
Ground
30
CLK
Dot data clock
31
RESETB
Active low global reset signal input.
32
HSYNC
Horizontal sync input
33
VSYNC
Vertical sync input
34
SDI
Data input pin in serial interface.
35
SCL
Clock input pin in serial interface.
36
GND
Ground.
37
NC
NO use.
38
NC
NO use.
39
NC
NO use.
40
NC
NO use.
T/P PIN
Pin No.
Symbol
1
GND
Ground. (T/P)
2
SDA
I2C Data.(T/P)
3
SCL
I 2C
4
VDD
Power.(T/P)
5
INT
Active Low. (T/P)
6
XRES
PH480272T-006-I16Q
Function
Clock. (T/P)
XRES. (T/P)
Page15
SAMPLE Ver.01
SPEC Edi.002
2.3
Timing Characteristics
2.3.1 Parallel RGB Input Timing Table
PH480272T-006-I16Q
Page16
SAMPLE Ver.01
SPEC Edi.002
2.3.2
3-Wire Communication Timing Table
PH480272T-006-I16Q
Page17
SAMPLE Ver.01
SPEC Edi.002
3. QUALITY ASSURANCE SYSTEM
3.1
Quality Assurance Flow Chart
Item
Customer
Sales
Info
Marketing
&
Design
R&D
Manufactu Product
Inventory
Purchase
ring
control
control
Q.A
Survey
Request
Project
Inquiry
evaluation
Project Validation
NG
OK
Quote
Contract
Design check
Sample test
Sample
Approval
NG
Verification
NG
OK
Sample approval
OK
Pilot
Pilot
Run
&
Mass
Product
NG
Verification
OK
Specification preparation
Mass production
OK
Ship
Out
PH480272T-006-I16Q
run & Reliability test
Inspection
NG
Shipment
Ship out
Page18
SAMPLE Ver.01
SPEC Edi.002
Item
Customer
Sales
Info
Claim
R&D
Manufact Product
Inventory
Purchase
uring
control
control
Q.A
Failure analysis
Sales
Service
Analysis report
Corrective action
Tracking
1. ISO 9001 Maintenance Activities
Q.A
3. Equipment calibration
Activity 5. Standardization Management
PH480272T-006-I16Q
2. Process improvement proposal
4. Education And Training Activities
Page19
SAMPLE Ver.01
SPEC Edi.002
3.2. Inspection Specification
PH480272T-006-I16Q
Page20
SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I16Q
Page21
SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I16Q
Page22
SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I16Q
Page23
SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I16Q
Page24
SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I16Q
Page25
SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I16Q
Page26
SAMPLE Ver.01
SPEC Edi.002
4. RELIABILITY TEST
4.1
Reliability Test Condition
NO.
TEST ITEM
1
High Temperature
Storage Test
2
Low Temperature
Storage Test
3
High Temperature /
High Humidity
Storage Test
4
Temperature Cycling
Storage Test
5
ESD Test
6
Vibration Test
(Packaged)
7
Drop Test
(Packaged)
(Ver.B01)
TEST CONDITION
Keep in +80 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
Keep in -30 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
Keep in +60℃ / 90% R.H duration for 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
(Excluding the polarizer)
-30℃ → +25℃ → +80℃ → +25℃
(30mins)
(5mins)
(30mins)
(5mins)
10 Cycle
Surrounding temperature, then storage at normal condition 4hrs.
Air Discharge:
Contact Discharge:
Apply 2 KV with 5 times
Apply 250 V with 5 times
Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃∼35℃
2. Humidity relative : 30%∼60%
3. Energy Storage Capacitance(Cs+Cd) : 150pF±10%
4. Discharge Resistance(Rd) : 330Ω±10%
5. Discharge, mode of operation :
Single Discharge (time between successive discharges at least 1 sec)
(Tolerance if the output voltage indication : ±5%)
1. Sine wave 10∼55 Hz frequency (1 min/sweep)
2. The amplitude of vibration :1.5 mm
3. Each direction (X、Y、Z) duration for 2 Hrs
Packing Weight (Kg)
0 ~ 45.4
Drop Height (cm)
122
45.4 ~ 90.8
76
90.8 ~ 454
61
Over 454
46
Drop Direction :※1 corner / 3 edges / 6 sides each 1time
PH480272T-006-I16Q
Page27
SAMPLE Ver.01
SPEC Edi.002
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1
5.1.2
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1
5.2.2
5.2.8
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
To control temperature and time of soldering is 320±10℃and 3-5 sec.
5.2.9
To avoid liquid (include organic solvent) stained on LCM .
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.3 STORAGE
5.3.1
Store the panel or module in a dark place where the temperature is 25℃ ±5℃
5.3.2
5.3.3
and the humidity is below 65% RH.
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1
5.4.2
Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
PH480272T-006-I16Q
Page28
SAMPLE Ver.01
SPEC Edi.002