TECH. CORP. SPECIFICATIONS CUSTOMER : SAMPLE CODE : SH480272T-006-I-Q MASS PRODUCTION CODE : PH480272T-006-I-Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. (Ver.) : JLMD-PH480272T-006-I-Q_002 PACKAGING NO. (Ver.) : - Customer Approved POWERTIP 2010.03.25 JS RD APPROVED Date: Approved Checked Designer 閆偉 Ryan 戴進霞 Una 劉進 Lori ■ Preliminary specification for design input □ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) 03/22/2010 Ver. Edi. 01 001 Description Page Design by New Drawing. - Lori Total: 26 Page PH480272T-006-I-Q Page2 SAMPLE Ver.01 SPEC Edi.001 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing PH480272T-006-I-Q Page3 SAMPLE Ver.01 SPEC Edi.001 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 480 * 3 (RGB) * 272 Dots LCD Type a-Si TFT , Normally white, Transmissive type Screen size(inch) 4.3 inch Viewing Direction 6 O’clock Color configuration RGB-Strip Backlight Type LED B/L Interface Digital 24-bits RGB OTA5180A Other(controller/driver IC) ROHS 1.2 (Or Compatible IC ) THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news/LatestNews.asp Mechanical Specifications Item Standard Value Unit Outline Dimension 105.5(W) x 67.2 (L) x 5.0(H)MAX mm Item Standard Value Unit Active Area 95.04 (W) x 53.856 (L) mm Item Standard Value Unit Viewing Area 99.5 (W) * 58.0 (L) mm Active Area 97.0 (W) * 55.8 (L) mm LCD panel Touch panel Note : For detailed information please refer to LCM drawing PH480272T-006-I-Q Page4 SAMPLE Ver.01 SPEC Edi.001 1.3 Absolute Maximum Ratings Module 1.4 Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDDIO GND=0 -0.3 4.5 V Operating Temperature TOP - -20 70 °C Storage Temperature TST - -30 80 °C DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Symbol Condition Min. Typ. Max. Unit - 3.0 3.3 3.6 V VIH - 0.7VDDIO - VDDIO V VIL - 0 - 0.3VDDIO V Output H/L Level Voltage VOH - VDDIO-0.4 - VDDIO V VOL - 0 - GND+0.4 V Supply Current IDD - TBD TBD mA Power Supply Voltage VDDIO Input H/L Level Voltage VDDIO = 3.3 V Pattern=TBD *1 Note1:Maximum current display PH480272T-006-I-Q Page5 SAMPLE Ver.01 SPEC Edi.001 1.5 Optical Characteristics VDDIO= 3.3 V, Ta=25°C TFT LCD Module Item Symbol Condition Min. Typ. Max. unit - Tr+Tf 25℃ - - TBD TBD ms - Top θY+ - TBD - Bottom θY- - TBD - Left θX- - TBD - Deg. Note 4 Right θX+ CR X TBD TBD TBD TBD TBD TBD - Note 3 Y TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD - Note1 Y TBD TBD TBD X TBD TBD TBD Y TBD TBD TBD Response time Viewing angle Contrast ratio White Color of CIE Coordinate （With B/L） Red Green Blue X Y X CR ≥ 10 Ta = 25°C θX , θY = 0° Average Brightness Pattern=white display (With LCD)*1 IV IF= TBD 200 TBD - Uniformity (With LCD)*2 △B IF= TBD TBD - - PH480272T-006-I-Q Page6 cd/m2 Note1 % Note1 SAMPLE Ver.01 SPEC Edi.001 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr PH480272T-006-I-Q Tf Page7 SAMPLE Ver.01 SPEC Edi.001 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θ X = θ Y = 0° 12H Φ = 180 ° Φ = 270 ° θY- θY+ θ X - = 90 ° X- θ Y + = 90 ° Y+ θX- θX+ Φ = 90 ° Φ X+ Y6H Φ=0° θ Y - = 90 ° PH480272T-006-I-Q θ X + = 90 ° Page8 SAMPLE Ver.01 SPEC Edi.001 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit LED Forward Current IF Ta =25℃ - TBD mA LED Reverse Voltage VR Ta =25℃ - TBD V Power Dissipation PD Ta =25℃ - TBD mW Electrical / Optical Characteristics Item Symbol Forward Voltage Average Brightness (Without LCD &T/P) CIE Color Coordinate (Without LCD &T/P) Conditions Min. Typ. Max. Unit VF - TBD - V IV TBD TBD - cd/m2 X - TBD - Y - TBD - IF= TBD Color PH480272T-006-I-Q - White Page9 SAMPLE Ver.01 SPEC Edi.001 1.7 Touch Panel Characteristics TBD PH480272T-006-I-Q Page10 SAMPLE Ver.01 SPEC Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH480272T-006-I-Q Page11 SAMPLE Ver.01 SPEC Edi.001 2.2 Interface Pin Description Pin No. Symbol 1 K Power supply for LED Backlight cathode input 2 A Power supply for LED Backlight anode input 3 CSB 4 VDDIO Digital power 5 R0 Red data bit 0 6 R1 Red data bit 1 7 R2 Red data bit 2 8 R3 Red data bit 3 9 R4 Red data bit 4 10 R5 Red data bit 5 11 R6 Red data bit 6 12 R7 Red data bit 7 13 G0 Green data bit 0 14 G1 Green data bit 1 15 G2 Green data bit 2 16 G3 Green data bit 3 17 G4 Green data bit 4 18 G5 Green data bit 5 19 G6 Green data bit 6 20 G7 Green data bit 7 PH480272T-006-I-Q Function Chip select pin of serial interface. Page12 SAMPLE Ver.01 SPEC Edi.001 Pin No. Symbol 21 B0 Blue data bit 0 22 B1 Blue data bit 1 23 B2 Blue data bit 2 24 B3 Blue data bit 3 25 B4 Blue data bit 4 26 B5 Blue data bit 5 27 B6 Blue data bit 6 28 B7 Blue data bit 7 29 GND Ground 30 CLK Dot data clock 31 RESETB Active low global reset signal input. 32 HSYNC Horizontal sync input 33 VSYNC Vertical sync input 34 SDI Data input pin in serial interface. 35 SCL Clock input pin in serial interface. 36 GND Ground 37 XR Right side of touch panel. 38 YD Bottom side of touch panel. 39 XL Left side of touch panel. 40 YU Up side of touch panel. PH480272T-006-I-Q Function Page13 SAMPLE Ver.01 SPEC Edi.001 2.3 Timing Characteristics 2.3.1 Parallel RGB Input Timing Table PH480272T-006-I-Q Page14 SAMPLE Ver.01 SPEC Edi.001 2.3.2 3-Wire Communication Timing Table PH480272T-006-I-Q Page15 SAMPLE Ver.01 SPEC Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH480272T-006-I-Q run & Reliability test Inspection NG Shipment Ship out Page16 SAMPLE Ver.01 SPEC Edi.001 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH480272T-006-I-Q Page17 2. Process improvement proposal 4. Education And Training Activities SAMPLE Ver.01 SPEC Edi.001 3.2 Inspection Specification PH480272T-006-I-Q Page18 SAMPLE Ver.01 SPEC Edi.001 PH480272T-006-I-Q Page19 SAMPLE Ver.01 SPEC Edi.001 PH480272T-006-I-Q Page20 SAMPLE Ver.01 SPEC Edi.001 PH480272T-006-I-Q Page21 SAMPLE Ver.01 SPEC Edi.001 PH480272T-006-I-Q Page22 SAMPLE Ver.01 SPEC Edi.001 PH480272T-006-I-Q Page23 SAMPLE Ver.01 SPEC Edi.001 PH480272T-006-I-Q Page24 SAMPLE Ver.01 SPEC Edi.001 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PH480272T-006-I-Q Page25 SAMPLE Ver.01 SPEC Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH480272T-006-I-Q Page26 SAMPLE Ver.01 SPEC Edi.001