2200RM Series www.murata-ps.com Bobbin Wound Surface Mount Inductors SELECTION GUIDE FEATURES n RoHS compliant n Up to 2.52A IDC n 10μH to 68mH n Low DC resistance n Surface mount n Compact size n Tape and reel packaging n Compatible with RoHS soldering systems n Backward compatible with Sn/Pb soldering systems n Custom parts available DESCRIPTION The 2200RM Series is a surface mount alternative to our 2200R Series. It is a general purpose range of inductors suitable for low to medium current applications. Their small footprint makes them ideal for high density applications where a chip inductor will not cope with the power requirement. Order Code Inductance, (1kHz, 0.1VAC) ±10% μH DC Current1 Max. A 22R103MC 22R153MC 22R223MC 22R333MC 22R473MC 22R683MC 22R104MC 22R154MC 22R224MC 22R334MC 22R474MC 22R684MC 22R105MC 22R155MC 22R225MC 22R335MC 22R475MC 22R685MC 22R106MC 22R156MC 22R226MC 22R336MC 22R476MC 22R686MC 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1.0mH 1.5mH 2.2mH 3.3mH 4.7mH 6.8mH 10.0mH 15.0mH 22.0mH 33.0mH 47.0mH 68.0mH 2.52 2.08 1.81 1.31 0.99 0.84 0.80 0.64 0.50 0.42 0.37 0.30 0.21 0.16 0.14 0.12 0.10 0.077 0.068 0.055 0.044 0.037 0.033 0.026 DC Resistance Max. Ω 0.05 0.07 0.09 0.14 0.22 0.28 0.39 0.54 0.83 1.21 1.65 2.64 3.63 6.49 8.58 10.0 13.2 22.0 37.4 49.5 82.5 110.0 154.0 242.0 ABSOLUTE MAXIMUM RATINGS Operating free air temperature range Storage temperature range -40°C to 85°C -40°C to 150°C SOLDERING INFORMATION2 Peak reflow temperature Pin finish Moisture sensitivity level3 250˚C Hot dipped tin 1 PACKAGE SPECIFICATIONS Mechanical Dimensions 7.50± 0.4 (0.295± 0.016) Recommended Pad Layout 7.80± 0.4 (0.307± 0.016) 686MC 2.20 (0.087) 7.00± 0.4 (0.276± 0.016) 7.50 (0.295) 8.00 (0.315) R1.00 (0.039) Package weight: 1.30g Typ. Unless otherwise stated, all dimensions in mm (inches) ± 0.25 (0.010). All specifications typical at TA=25°C For full details go to www.murata-ps.com/rohs 1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs 3 When tested to moisture sensitivity level 1, as described per IPC/JEDEC J-STD-020D, products passed electrical testing, package coplanarity and visual inspection. www.murata-ps.com/support KMP_2200RMC_A03 Page 1 of 3 2200RM Series Bobbin Wound Surface Mount Inductors 2200RM Series Inductance Vs Current INDUCTANCE Vs CURRENT 100000 68mH 10mH 10000 Inductance, L (µH) 1mH 1000 100µH 100 10µH 10 1 0.001 0.01 0.1 1 10 Current, IDC (A) 2200RM Temperature Vs Current TEMPERATURE Vs CURRENT Temperature rise above ambient, t (ºC) 60 10mH 1mH 50 100µH 10µH 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Current, IDC (A) 2200RM Series Inductance Vs Frequency INDUCTANCE Vs FREQUENCY 1000000 68mH Inductance, L (µH) 100000 10mH 10000 1mH 1000 100µH 100 10µH 10 1 10 100 1000 10000 Frequency, (kHz) www.murata-ps.com/support KMP_2200RMC_A03 Page 2 of 3 2200RM Series Bobbin Wound Surface Mount Inductors TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS Ø331 [13.03] Max. 23.9-27.4 [0.94-1.08]* 100 ±0.5 [3.937 ±0.02] Ø 13.50 0.531 Ø 12.80 0.504 Leader Section 400 [15.748] Min. 100 [3.937] Min. 1.50 [0.059] Min. 24.7 [0.972] Max.† Goods Enclosure Section 24.4 [0.96]† +2 [0.079] -0 [0] Trailer Section 160 [6.299] Min. All dimensions in mm (inches) * Includes flange distortion at outer edge † Measured at hub Ø20.20 [Ø0.795] Min. TAPE OUTLINE DIMENSIONS 11.5 (0.453) 24 (0.945) Ø1.5 (0.059) 16 (0.63) 2 (0.079) User direction of unreeling 0.4 (0.016) 686MC 4 (0.157) 686MC 1.75 (0.069) 8.05 (0.315) 7.8 (0.307) Reel quantity: 500 All dimensions in mm (inches) Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2011 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_2200RMC_A03 Page 3 of 3