MTE1 Series - power, Murata

MTE1 Series
www.murata-ps.com
Isolated 1W Single Output SM DC/DC Converters
„
Wide temperature performance at full
1 Watt load, –40°C to 85°C
„
UL 60950 recognised
„
3.3V, 5V, 12V, 15V & 24V Input
„
3.3V, 5V, 9V, 12V & 15V Output
„
Internal SMD construction
„
Toroidal magnetics
PRODUCT OVERVIEW
The MTE1 series is a new range of surface mount,
high performance 1W DC-DC converters. The
MTE1 series is the new high performance version
of our 1W NTE series, the MTE1 series is more
efficient and offers improved regulation performance. The MTE1 series offers 1W of available
output power over the full industrial temperature
range of -40ºC to 85ºC.
The MTE1 series has a MSL rating 1, and is
compatible with a peak reflow solder temperature
of 245ÚC as per J-STD-020D.1.
mA
%
%
mVp-p
%
%
pF
kHrs
382
363
353
348
346
248
239
236
233
227
225
97
95
93
93
79
77
76
75
50
48
48
48
11
8.5
7
6.5
6
9
6.5
6
5
5
5
5
3
3
3
4
3
2.5
2.5
4
2.5
2
2
13.5
11
9
8
8
12
8
7.5
6.5
6.5
6.5
7
4.5
4.5
4
5.5
4
4
4
5.5
4
3.5
3.5
33
24
17
15
13
24
20
20
15
14
11
19
13
12
11
15
9
10
8
20
19
19
22
75
79
82
83
83
77
79
81
83
84
85
81
82
85
85
80
81
82
84
79
84
83
85
78
82
85
86
86
79
82
84
85
87
88
84
86
88
88
83
86
87
88
83
86
87
88
15
16
21
20
20
21
22
24
26
29
33
24
29
43
40
25
38
45
57
21
31
39
46
3083
2912
2759
2573
2265
3080
3041
3024
2875
2658
2336
2707
2597
2422
2169
2444
2366
2196
2001
2731
2698
2488
2392
Units
MTTF2
mA
303
200
111
83
67
303
200
167
111
83
67
200
111
83
67
200
111
83
67
200
111
83
67
Efficiency (Min.)
Load Regulation
(Typ. )
V
3.3
5
9
12
15
3.3
5
6
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
Output Current
V
3.3
3.3
3.3
3.3
3.3
5
5
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
Output Voltage
Isolation
Capacitance
„
Typical efficiency 86%
Efficiency (Typ.)
„
1kVDC Isolation “Hi Pot Test”
Output Ripple
& Noise (Typ.)
„
Single isolated output
MTE1S0303MC
MTE1S0305MC
MTE1S0309MC
MTE1S0312MC
MTE1S0315MC
MTE1S0503MC
MTE1S0505MC
MTE1S0506MC
MTE1S0509MC
MTE1S0512MC
MTE1S0515MC
MTE1S1205MC
MTE1S1209MC
MTE1S1212MC
MTE1S1215MC
MTE1S1505MC
MTE1S1509MC
MTE1S1512MC
MTE1S1515MC
MTE1S2405MC
MTE1S2409MC
MTE1S2412MC
MTE1S2415MC
Load Regulation
(Max)
FEATURES
URES
Nominal Input
Voltage
Order Code1
Input Current
at Rated Load (Typ.)
SELECTION GUIDE
INPUT CHARACTERISTICS
Parameter
Conditions
Min.
Typ.
Max.
Voltage range
Continuous operation, 3.3V input types
Continuous operation, 5V input types
Continuous operation, 12V input types
Continuous operation, 15V input types
Continuous operation, 24V input types
2.97
4.5
10.8
13.5
21.6
3.3
5.0
12.0
15.0
24
5
3.63
5.5
13.2
16.5
26.4
15
mA p-p
Typ.
Max.
Units
Reflected ripple current
V
ISOLATION CHARACTERISTICS
Parameter
Conditions
Min.
Isolation voltage
Resistance
Flash tested for 1 second
Viso= 1000VDC
1000
20
VDC
GΩ
GENERAL CHARACTERISTICS
Parameter
Conditions
Switching frequency
All output types
Min.
Typ.
80
Max.
Units
Hz
ABSOLUTE MAXIMUM RATINGS
Input voltage VIN, MTE03 types
Input voltage VIN, MTE05 types
Input voltage VIN, MTE12 types
Input voltage VIN, MTE15 types
Input voltage VIN, MTE24 types
5.5V
7V
15V
18V
28V
1. If components are required in tape and reel format suffix order code with -R, e.g. MTE0505MC-R.
2. Calculated using MIL-HDBK-217 FN2 calculation model with nominal input voltage at full load.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 1 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
OUTPUT CHARACTERISTICS
Parameter
Conditions
Rated power
Voltage set point accuracy
Line regulation
Ripple and noise
TA=-40°C to 85°C
See tolerance envelope
High VIN to low VIN
BW=DC to 20MHz
Min.
Typ.
Max.
Units
1.0
W
1.1
25
1.2
70
%/%
mV p-p
Typ.
Max.
Units
°C
12.5
85
130
20
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Specification
Storage
Case temperature rise above ambient
Cooling
All output types
-40
-50
All output types
Free air convection
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage,
applied for a specified time, across a component designed to provide electrical isolation,
to verify the integrity of that isolation.
Murata Power Solutions MTE1 series of DC/DC converters are all 100% production tested
at their stated isolation voltage. This is 1kVDC for 1 second.
A question commonly asked is, “What is the continuous voltage that can be applied
across the part in normal operation?”
The MTE1 has been recognized by Underwriters Laboratory for functional insulation, both
input and output should normally be maintained within SELV limits i.e. less than 42.4V
peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient
voltages and the part should never be used as an element of a safety isolation system.
The part could be expected to function correctly with several hundred volts offset applied
continuously across the isolation barrier; but then the circuitry on both sides of the barrier must be regarded as operating at an unsafe voltage and further isolation/insulation
systems must form a barrier between these circuits and any user-accessible circuitry
according to safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can
actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. The MTE1 series has toroidal isolation transformers,
with no additional insulation between primary and secondary windings of enameled
wire. While parts can be expected to withstand several times the stated test voltage,
the isolation capability does depend on the wire insulation. Any material, including this
enamel (typically polyurethane) is susceptible to eventual chemical degradation when
subject to very high applied voltages thus implying that the number of tests should be
strictly limited. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified
test voltage.
This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
SAFETY APPROVAL
The MTE1 series has been recognized by Underwriters Laboratory (UL) to UL 60950 for functional insulation in a maximum ambient temperature for 3.3V & 5V input models of
60°C and for 12V, 15V and 24V models of 85°C. File number E151252 applies. The MTE1 Series of converters are not internally fused so to meet the requirements of UL 60950
an anti-surge input line fuse should always be used with ratings as defined below.
MTE1S03xxxC: 1A
MTE1S05xxxC: 0.7A
MTE1S12xxxC: 0.2A
MTE1S15xxxC: 0.2A
MTE1S24xxxC: 0.16A
All fuses should be UL approved and rated to at least the maximum allowable DC input voltage.
TEMPERATURE DERATING GRAPH
Output Power (W)
1.5
85°C
1.0
0.5
0
-40
Safe Operating Area
100
50
0
Ambient Temperature (°C)
www.murata-ps.com
150
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 2 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
TOLERANCE ENVELOPES
The voltage tolerance envelope shows typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to
changes in output loading.
0303, 0503
0305,0309
+13%
+5%
+5%
+3%
Output Voltage
Output Voltage
+8%
+2%
-4%
-5%
10
50
25
75
100
10
25
50
100
75
Output Load Current (%)
Output Load Current (%)
0312, 0315, 0505, 0506, 0509
1209, 1212, 1215, 15XX, 2409, 2412, 2415
+3%
+2%
Output Voltage
Output Voltage
+7%
+4%
+1%
0%
-3%
-4%
10
75
50
Output Load Current (%)
25
100
10
25
75
50
Output Load Current (%)
100
Output Voltage
0512, 0515, 1205,2405
+5%
+1%
0%
-4%
10
25
www.murata-ps.com
75
50
Output Load Current (%)
100
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 3 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
EFFICIENCY VS LOAD
5V Input
90
70
70
Efficiency (%)
Efficiency (%)
3.3V Input
90
50
MTE1S0303MC
MTE1S0305MC
30
MTE1S0309MC
MTE1S0503MC
50
MTE1S0505MC
MTE1S0509MC
30
MTE1S0512MC
MTE1S0312MC
0
MTE1S0515MC
MTE1S0315MC
10
20
40
60
80
MTE1S0506MC
10
100
0
20
40
Load (%)
12V Input
90
70
70
50
MTE1S1205MC
30
MTE1S1209MC
MTE1S1505MC
30
MTE1S1509MC
MTE1S1512MC
MTE1S1215MC
10
20
40
100
50
MTE1S1212MC
0
80
15V Input
90
Efficiency (%)
Efficiency (%)
60
Load (%)
60
Load (%)
80
MTE1S1515MC
10
100
0
20
40
60
Load (%)
80
100
24V Input
90
Efficiency (%)
70
50
MTE1S2405MC
30
MTE1S2409MC
MTE1S2412MC
MTE1S2415MC
10
0
20
40
60
Load (%)
80
100
RoHS COMPLIANCE, MSL AND PSL INFORMATION
This series is compatible with RoHS soldering systems with a peak reflow solder temperature of 245ºC as per
J-STD-020D.1. The pin termination finish on this product series is Matte Tin over Nickel Preplate. The series is
backward compatible with Sn/Pb soldering systems. The series has a Moisture Sensitivity Level (MSL) 1.
Samples of the product series were tested in accordance with the conditioning described for MSL level 1 in
IDC/J-STD-020D.1. The product series passed electrical tests and visual inspection criteria.
For further information, please visit: www.murata-ps.com/rohs
www.murata-ps.com
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 4 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
APPLICATION NOTES
Advisory Notes
Minimum Load
The MTE series is not hermetically sealed, customers should ensure that parts are
fully dried before input power application.
The minimum load to meet datasheet specification is 10% of the full rated load
across the specified input voltage range. Lower than 10% minimum loading will
result in an increase in output voltage, which may rise to typically double the
specified output voltage if the output load falls to less than 5%.
The MTE has been tested to the following standards, which should not be exceeded for shock and vibration:
BS EN 60068-2-64:2008 (Vibration Broadband Random)
BS EN 60068-2-27:2009 (Mechanical Shock)
Capacitive Loading & Start Up
Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of 10μF, are shown in the table below. The
product series will start into a capacitance of 47μF with an increased start time, however, the maximum recommended output capacitance is 10μF.
MTE1S0303MC
MTE1S0305MC
MTE1S0309MC
MTE1S0312MC
MTE1S0315MC
MTE1S0503MC
MTE1S0505MC
MTE1S0506MC
Start-up time
μs
TBC
TBC
TBC
TBC
TBC
TBC
TBC
TBC
Start-up time
μs
TBC
TBC
TBC
TBC
TBC
TBC
TBC
TBC
MTE1S0509MC
MTE1S0512MC
MTE1S0515MC
MTE1S1205MC
MTE1S1209MC
MTE1S1212MC
MTE1S1215MC
MTE1S1505MC
MTE1S1509MC
MTE1S1512MC
MTE1S1515MC
MTE1S2405MC
MTE1S2409MC
MTE1S2412MC
MTE1S2415MC
Start-up time
μs
TBC
TBC
TBC
TBC
TBC
TBC
TBC
Typical Start-Up Wave Form
Output Ripple Reduction
By using the values of inductance and capacitance stated, the output ripple at the
rated load is lowered to 5mV p-p max.
Component selection
Capacitor: It is required that the ESR (Equivalent Series Resistance) should be
as low as possible, ceramic types are recommended. The voltage rating should
be at least twice (except for 15V output), the rated output voltage of the DC/DC
converter.
Inductor: The rated current of the inductor should not be less than that of the
output of the DC/DC converter. At the rated current, the DC resistance of the
inductor should be such that the voltage drop across the inductor is <2% of the
rated voltage of the DC/DC converter. The SRF (Self Resonant Frequency) should
be >20MHz.
L
Power
Source
www.murata-ps.com
DC
C
DC
Load
MTE1S0303MC
MTE1S0305MC
MTE1S0309MC
MTE1S0312MC
MTE1S0315MC
MTE1S0503MC
MTE1S0505MC
MTE1S0506MC
MTE1S0509MC
MTE1S0512MC
MTE1S0515MC
MTE1S1205MC
MTE1S1209MC
MTE1S1212MC
MTE1S1215MC
MTE1S1505MC
MTE1S1509MC
MTE1S1512MC
MTE1S1515MC
MTE1S2405MC
MTE1S2409MC
MTE1S2412MC
MTE1S2415MC
L, μH
4.7
10
22
47
47
4.7
10
22
22
47
47
10
22
47
47
10
22
47
47
10
22
47
47
Inductor
SMD
82472C
82103C
82223C
82473C
82473C
82472C
82103C
82223C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
Through Hole
11R472C
11R103C
11R223C
11R473C
11R473C
11R472C
11R103C
11R223C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R223C
11R103C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
Capacitor
C, μF
10
4.7
2.2
1
1
10
4.7
2.2
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 5 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
EMC FILTERING AND SPECTRA
FILTERING
A 22uF (100uF for the MTE1S2405MC), input capacitor is required to meet EN 55022 Curve B, Quasi-Peak EMC limit, as shown in the following plots.
MTE1S0305MC
80
80
70
70
60
60
50
50
dBuV
dBuV
MTE1S0303MC
40
40
30
30
20
20
10
0
1.00E+05
10
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
1.00E+06
Frequency (Hz)
MTE1S0309MC
80
70
70
60
60
50
dBuV
dBuV
50
40
40
30
30
20
20
10
10
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
1.00E+06
MTE1S0315MC
1.00E+08
MTE1S0503MC
80
80
70
70
60
60
50
50
dBuV
dBuV
1.00E+07
Frequency (Hz)
Frequency (Hz)
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+08
MTE1S0312MC
80
0
1.00E+05
1.00E+07
Frequency (Hz)
1.00E+06
1.00E+07
Frequency (Hz)
www.murata-ps.com
1.00E+08
0
1.00E+05
1.00E+06
1.00E+07
1.00E+08
Frequency (Hz)
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 6 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
EMC FILTERING AND SPECTRA (continued)
MTE1S0506MC
80
80
70
70
60
60
50
50
dBuV
dBuV
MTE1S0505MC
40
40
30
30
20
20
10
0
1.00E+05
10
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
1.00E+06
Frequency (Hz)
1.00E+08
MTE1S0512MC
80
80
70
70
60
60
50
50
dBuV
dBuV
MTE1S0509MC
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+07
Frequency (Hz)
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
1.00E+06
Frequency (Hz)
1.00E+07
1.00E+08
Frequency (Hz)
MTE1S0515MC
MTE1S1205MC
80
80
70
70
60
60
50
dBuV
dBuV
50
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+06
1.00E+07
1.00E+08
0
1.00E+05
Frequency (Hz)
1.00E+06
1.00E+07
1.00E+08
1.00E+07
1.00E+08
Frequency (Hz)
MTE1S1209MC
MTE1S1212MC
80
80
70
70
60
60
50
dBuV
dBuV
50
40
30
30
20
20
10
0
1.00E+05
40
10
1.00E+06
1.00E+07
Frequency (Hz)
www.murata-ps.com
1.00E+08
0
1.00E+05
1.00E+06
Frequency (Hz)
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 7 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
EMC FILTERING AND SPECTRA (continued)
MTE1S1215MC
MTE1S1505MC
80
80
70
70
60
60
50
dBuV
dBuV
50
40
30
30
20
20
10
0
1.00E+05
40
10
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
1.00E+06
Frequency (Hz)
1.00E+07
1.00E+08
1.00E+07
1.00E+08
1.00E+07
1.00E+08
1.00E+07
1.00E+08
Frequency (Hz)
MTE1S1509MC
MTE1S1512MC
80
80
70
70
60
60
50
dBuV
dBuV
50
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
Frequency (Hz)
1.00E+06
Frequency (Hz)
MTE1S2405MC
80
80
70
70
60
60
50
50
dBuV
dBuV
MTE1S1515MC
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+06
1.00E+07
0
1.00E+05
1.00E+08
1.00E+06
Frequency (Hz)
Frequency (Hz)
MTE1S2412MC
80
80
70
70
60
60
50
50
dBuV
dBuV
MTE1S2409MC
40
40
30
30
20
20
10
10
0
1.00E+05
1.00E+06
1.00E+07
Frequency (Hz)
www.murata-ps.com
1.00E+08
0
1.00E+05
1.00E+06
Frequency (Hz)
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 8 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
EMC FILTERING AND SPECTRA (continued)
MTE1S2415MC
80
70
60
dBuV
50
40
30
20
10
0
1.00E+05
1.00E+06
1.00E+07
1.00E+08
Frequency (Hz)
www.murata-ps.com
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 9 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
PACKAGE SPECIFICATIONS
Mechanical Dimensions
Pin Connections
12.70±0.20
(0.500±0.008)
7.62 (0.300)
14
11.00±0.15
(0.433±0.006)
10.70±0.15
(0.421±0.006)
8
MTE1S0303MC
Function
1
3
7
8
14
-VIN
+VIN
-VOUT
+VOUT
NA
NA - Not available for electrical connection.
XYYWW
1
3
7
2.54 (0.100)
0.6±0.05 (0.024±0.002)
+0.35
( 0.278 +0.014
)
-0.10
-0.004
x5 Pins
0.10 S
0.2 (0.008) Min.
2.54±0.15 (0.100±0.006)
All dimensions in mm ±0.25mm (inches ±0.01). All pins on a 2.54 (0.1) pitch and within ± 0.25 (0.01) of true position.
0.25±0.05 (0.010±0.002)
1.56±0.10 (0.061±0.004)
Weight: 1.1g Typ.
Tube Outline Dimensions
Recommended Footprint Details
2.30 (0.091)
11.40 (0.45)
7.62
(0.3)
9.40
(0.370)
14.85 (0.59)
7.05
Pin
2.54 (0.1)
1.00 (0.040) Min.
All pins on a 2.54mm pitch.
www.murata-ps.com
9.05 (0.36)
Unless otherwise stated all dimensions in mm±0.5mm (inches ±0.02).
Tube length : 475±2.0 (18.70±0.07).
Tube Quantity: 30
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 10 of 11
MTE1 Series
Isolated 1W Single Output SM DC/DC Converters
TAPE & REEL SPECIFICATIONS
REEL OUTLINE DIMENSIONS
TAPE OUTLINE DIMENSIONS
330±2.0
(12.99±0.08)
13.25
(0.52)
0.60 (0.02) Max.
Ø90 (3.54)
+0.004 (+0.10)
-0.00 (-0.00)
DIRECTION OF UNREELING
1.50 (Ø0.06)
2.00
(0.08)
13.00±0.5
Ø (0.51±0.02)
16.00 (0.63)
11.50
(0.45)
4.00
(0.16)
1.75(0.07)
11.50
(0.45)
8.10
(0.32)
24.00±0.30
(0.94±0.01)
REEL PACKAGING DETAILS
GOODS ENCLOSURE
SECTION
MTE1S0303MC
XYYWW
MTE1S0303MC
XYYWW
Product Orientation
Pin 1, located nearest to
carrier drive sprocket.
MTE1S0303MC
XYYWW
TRAILER SECTION
160 (6.30) MIN
CARRIER TAPE START
100 (3.94) MIN
LEADER SECTION
400 (15.75) MIN
Reel Quantity: 500
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/support
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2015 Murata Power Solutions, Inc.
All enquiries: www.murata-ps.com/support
KDC_MTE1.B03 Page 11 of 11