AAF-03 SERIES AC/DC Power Module 3W FEATURES ►Ultra Compact Size 1.0 x 1.0 x 0.64”( 25.4 x 25.4 x 16.3 mm) ►Fully encapsulated Module with Solder Pins for PC Mount ►Regulated Single Outputs from 3.3 to 24VDC ►Universal Input 85 – 264 VAC ►EcoDesign, stand-by power consumption 150 mW max. ►Overvoltage and Short Circuit Protection ►Operating Temp. Range -25°C to +70°C ►Protection Class ll as per IEC/EN 60536 ►Safety Approval to UL/cUL/IEC/EN 60950-1, TUV IEC/EN 60335-1 ►3 Year Product Warranty PRODUCT OVERVIEW The new AAF-03 Series from MINMAX is a range of ultra-small,fully encapsulated 3 Watt AC/DC power supply modules.They are designed for easy PCB mounting with solder pins.The modules feature EMI-filter to meet EN 55011/55012,class B and EN 55014.EMC immunity complies with EN 61000-6-1.The low stand-by power consumption complies with European ErP Directive 2009/125/EC. Universal input voltage range of 85-264VAC and an International safety approval package qualifies the power modules for worldwide markets. The AAF-03 series provide a cost effective solution for space critical applications in consumer appliances and instrumentation and communication equipment. Model Selection Guide Model Output Number Voltage VDC 3.3 5 9 12 15 24 AAF-03S03 AAF-03S05 AAF-03S09 AAF-03S12 AAF-03S15 AAF-03S24 Output Current Input Current Max. capacitive Efficiency Load Max. Peak(1) @Max. Load mA 900 600 333 250 200 125 mA 1170 780 430 320 260 160 mA(typ.) 62 61 57 56 56 56 (typ.) @Max. Load μF 1200 820 470 330 270 180 % 70 72 77 78 78 78 Input Specifications Parameter Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:[email protected] 2014/09/09 REV:3 Typ. Max. Unit 85 --- 264 VAC 47 --- 63 Hz 120 --- 370 VDC --- --- 150 mW 115VAC --- --- 15 A 230VAC --- --- 25 A Tel:886-6-2923150 Page 1 of 3 Min. AAF-03 SERIES AC/DC POWER MODULE 3W Output Specifications Parameter Conditions Output Voltage Accuracy Line Regulation Load Regulation Ripple & Noise Min. Load Over Voltage Protection Temperature Coefficient Overshoot 0-20 MHz Bandwidth Zener Diode Clamp Min. Typ. Max. Unit ----- ----- ±2.0 ±1.0 ----- ±1.0 70 % % % mV P-P 125 ----- 190 ±0.05 5 % of Vo %/℃ %Vout --- %Inom. Max. --------- Unit VAC MΩ KHz ms Hours ----No min. Load required ------- Foldback, auto-recovery 135 150 (long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Current Limitation Short Circuit Protection General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) Protection Class II Conditions Input to Output, 60 Seconds 500 VDC Min. 3000 100 ----- 115VAC, Full Load MIL-HDBK-217F@25℃, Ground Benign Typ. ----65 8 1,200,000 According IEC/EN 60536 UL/cUL 60950-1 recognition(UL certificate) IEC/EN 60950-1(CB-scheme) IEC/EN 60335-1 recognition(TUV certificata,CB-scheme) Safety Approvals EMC Specifications Parameter EMI Standards & Level Performance EN55011, EN55014-1, EN55022, FCC part 15 Class B EN55014-2 ,EN55024 ESD Radiated immunity Fast transient Surge EMS EN61000-4-2 air ± 8kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms Conducted immunity PFMF Dips Interruptions A A A A A A A B Environmental Specifications Parameter Temperature Range (operational) Power Derating Storage Temperature Range Cooling Humidity (non condensing) Ambient Conditions -25℃ +60℃ to +70℃ -40℃ Free-Air convection --- +70℃ 0.15 W/℃ +85℃ 95 % rel. H Notes 1 Peak load lasting <30s with a maximum duty cycle of 10%, average output power not to exceed maximum power. 2 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 6 Specifications are subject to change without notice. E-mail:[email protected] 2014/09/09 REV:3 Tel:886-6-2923150 Page 2 of 3 AAF-03 SERIES AC/DC POWER MODULE 3W Package Specifications Mechanical Dimensions Pin Connections 25.4 [1.00] 20.32 [0.80] 2.54 [0.10] 10.16 [0.40] [0.20] 2 1 Pin Function 1 AC (N) 2 AC (L) 3 NC 4 -Vout 5 +Vout 5 2.54 [0.10] 5.08 4 25.4 [1.00] 25.4 [1.00] 10.16 [0.40] 3 16.3[0.64] 0.60 [ 0.02] 5.08 [0.20] ►All dimensions in mm (inches) ►Tolerance: ±0.5 ►Pin (±0.01) diameter 0.6 ±0.1 (0.02±0.004) Physical Characteristics Case Size : Case Material : 25.4x25.4x16.3mm (1.0x1.0x0.64 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Pin Material Weight : : Copper Alloy with Gold Plate Over Nickel Subplate 17.4g 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2014/09/09 REV:3 Page 3 of 3