AZF-60 SERIES AC/DC Power Module 60W FEATURES ►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85~264VAC, 47~440Hz ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -10℃ to +70℃ ►Overload/Voltage/Temp. and Short Circuit Protection ►Designed-in EMI Emission meets EN55011/22 Class B & FCC Level B ►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►UL508 Safety Approval (Option) Specifically for Industrial Application ►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking PRODUCT OVERVIEW The MINMAX AZF-60 series is a new range of fully encapsulated AC/DC power supply modules. The product features EMI-filter to EN55022, class B and EMS compliance to EN 61000-4 standard.Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval.The AZF-60 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output Voltage Output Current Input Current AZF-60S051 VDC 5.1 Max. mA 10,000 115VAC, 60Hz @Max. Load @No Load mA(typ.) mA(typ.) 936 50 AZF-60S12 12 5000 1060 AZF-60S15 15 4000 AZF-60S24 24 AZF-60S36 36 AZF-60S48 48 Max. capacitive Load μF 8000 Efficiency (typ.) @Max. Load % 79 50 3900 82 1047 50 3300 83 2500 1035 50 1500 84 1666 1035 50 1000 84 1250 1035 50 680 84 Input Specifications Parameter Conditions / Model Input Voltage Range Input Frequency Range All Models Input Voltage Range 115VAC Inrush Current 230VAC E-mail:[email protected] 2015/07/31 REV:13 Tel:886-6-2923150 Page 1 of 4 Cold Start at 25℃ Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 63 Hz 120 --- 370 VDC --- --- 30 A --- --- 50 A AZF-60 SERIES AC/DC POWER MODULE 60W Output Specifications Parameter Output Voltage Accuracy Line Regulation Load Regulation Conditions Vin=Min. to Max. @Full Load Io=10% to 100% 5.1VDC Output Models 0-20 MHz Bandwidth Other Output Models Ripple & Noise Minimum Load Over Voltage Protection Transient Response Deviation Temperature Coefficient Overshoot Zener diode clamp (Iout=100% to Iout=50%) Min. ------------------- Typ. ±1.0 ±0.2 ±0.5 2.0 1.0 10 120 ±3 ±0.02 --- Max. ±2.0 ±1.0 ±1.0 3.0 1.3 ----±6 --5 Unit % % % %VPP of Vo %VPP of Vo %Inom. % of Vo % %/℃ % Vout --- --- %Inom. Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, Automatic Recovery Current Limitation Short Circuit Protection General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) Protection Class II Conditions Input to Output, 60 Seconds 500 VDC Min. 3000 100 ----- Typ. ----100 20 Max. --------- MIL-HDBK-217F@25℃, Ground Benign 125,000 According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 (UL508 for models with order code suffix ICE only) Safety Approvals Unit VACrms MΩ KHz ms Hours Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Storage Temperature Range Power Derating Power Derating (5.1Vout) Over Temperature Protection Humidity (non condensing) Cooling Lead-free reflow solder process (1.5mm from case for 10Sec.) Conditions Min. Max. Natural Convection -10 +70 Unit ℃ ℃ W/℃ W/℃ -40 +85 2.25 2.25 at 90℃ (automatic recovery at 67℃) --95 Natural Convection +50℃ to +70℃ +40℃ to +70℃ --- % rel. H ℃ 260 EMC Specifications Parameter Standards & Level Conduction and Radiation EN55011 ,EN55024 ESD Radiated immunity Fast transient Surge Conducted immunity PFMF Dips Interruptions EMI EMS Performance EN55011, EN55022, FCC part 15 Class B EN61000-4-2 Air ± 8kV , Contact ± 4kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms B A B B B A B C Notes 1 2 3 4 5 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. Other input and output voltage may be available, please contact factory. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications are subject to change without notice E-mail:[email protected] 2015/07/31 REV:13 Tel:886-6-2923150 Page 2 of 4 AZF-60 SERIES AC/DC POWER MODULE 60W Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 25.4 [1.00] 4 1.0 [ 0.04] 6 81.3 [3.20] 27.5 [1.08] 31.45 [1.24] Mounting M4.0 Thread Bottom View 2 Function 1 AC(N) – AC Neutral 2 AC(L) – AC Line 4 +Vout 6 -Vout 88.9 [3.50] 28.75 [1.13] Pin 1 ►All dimensions in mm 55.88 [2.20] 0.7 [0.03] 6.0 [0.24] 67.5 [2.66] ►Tolerance: ±1.0 34.2 [1.35] ►Pin (inches) (±0.04) diameter 1.0 ±0.1 (0.04±0.004) Physical Characteristics Case Size : 88.9x67.5x34.2mm (3.50x2.66x1.35 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 345g Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Terminal Function 1 AC(N) – AC Neutral 7 2 AC(L) – AC Line 6 3 NC 4 +Vout 5 NC 6 -Vout 7 NC Top View 4 Indication LED 1 67.8 [2.67] 2 5 50.0 [1.97] 4x 3.5 3 DCON POWER"GOOD"INDICATOR 100.0 [3.94] NC: No Connection 112.0 [4.41] Physical Characteristics Case Size : 112.0x67.8x38.0mm (4.41x2.67x1.50 inches) Case Material Weight : : Plastic resin (flammability to UL 94V-0 rated) 357g E-mail:[email protected] 2015/07/31 REV:13 Tel:886-6-2923150 Page 3 of 4 38.0 [1.50] 5.0[0.20] 11.0 [0.43] 16.8 [0.66] 90.0 [3.54] ►All dimensions in mm ►Tolerance: ±1.0 (inches) (±0.04) AZF-60 SERIES AC/DC POWER MODULE 60W Package Specifications with DIN Rail Mounting Bracket Mechanical Dimensions 4x 3.5 2 5 Top View 4 1 67.8 [2.67] 50.0 [1.97] 7 6 3 Indication LED DCON POWER"GOOD"INDICATOR 100.0 [3.94] 112.0 [4.41] 38.0 [1.50] 11.0 [0.43] 3.0 [0.12] 5.0[0.20] 11.0 [0.43] 16.8 [0.66] 90.0 [3.54] Physical Characteristics Case Size : 112.0x67.8x38.0mm (4.41x2.67x1.50 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 410g DIN-Rail Mounting Bracket (Order Code for Kit : AC-DIN-02) Order Code Table PCB Mounting Chassis Mounting AZF-60S051C PCB Mounting With UL508 AZF-60S051ICE Chassis Mounting With UL508 AZF-60S051CICE With DIN Rail Mounting by two Order Code AZF-60S051C AC-DIN-02 Chassis Mounting with UL508 & DIN Rail Mounting by two Order Code AZF-60S051CICE AC-DIN-02 AZF-60S051 AZF-60S12 AZF-60S15 AZF-60S12C AZF-60S12ICE AZF-60S12CICE AZF-60S12C AC-DIN-02 AZF-60S12CICE AC-DIN-02 AZF-60S15C AZF-60S15ICE AZF-60S15CICE AZF-60S15C AC-DIN-02 AZF-60S15CICE AC-DIN-02 AZF-60S24 AZF-60S24C AZF-60S24ICE AZF-60S24CICE AZF-60S24C AC-DIN-02 AZF-60S24CICE AC-DIN-02 AZF-60S36 AZF-60S36C AZF-60S36ICE AZF-60S36CICE AZF-60S36C AC-DIN-02 AZF-60S36CICE AC-DIN-02 AZF-60S48 AZF-60S48C AZF-60S48ICE AZF-60S48CICE AZF-60S48C AC-DIN-02 AZF-60S48CICE AC-DIN-02 Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2015/07/31 REV:13 Page 4 of 4