AQF-30 SERIES AC/DC Power Module 30W FEATURES ►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85~264VAC, 47~440Hz ►Single, Dual and Triple Outputs ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -25°C to +70°C ►Overload/Voltage/Temp. and Short Circuit Protection ►Designed-in EMI Emission meets EN55011/22 Class B & FCC Level B ►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►UL508 Safety Approval (Option) Specifically for Industrial Application ►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking PRODUCT OVERVIEW The MINMAX AQF-30 series is a new range of fully encapsulated AC/DC power supply modules. The product features EMI-filter to EN55022, class B and EMS compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval.The AQF-30 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number Output Voltage Output Current μF 8000 Efficiency (typ.) @Max. Load % 78 60 3900 80 60 3900 80 543 60 1500 80 --- 543 60 1000 80 --- 565 60 #1500 80 --4500 1800 4500 900 900 4500 1500 500 4500 750 750 6000 1500 500 5300 2000 500 543 60 80 572 60 572 60 572 60 572 60 588 60 483 60 #1500 3900 1500 2200 1500 1500 2200 1500 1500 2200 1500 1500 2200 2200 1500 2200 2200 1500 # For each output 115VAC, 60Hz @Max. Load @No Load mA(typ.) mA(typ.) 557 60 AQF-30S05 VDC 5 Max. mA 6000 AQF-30S12 12 2500 --- 543 AQF-30S15 15 2000 --- 543 AQF-30S24 24 1250 --- AQF-30S48 48 625 AQF-30D12 ±12 ±1300 AQF-30D15 AQF-30D512 AQF-30T512 AQF-30T512A AQF-30T515 AQF-30T5312P AQF-30T3512P ±15 ±1000 *5 3000 *12 1250 *5 3000 12 600 -12 -600 *5 3000 12 1000 -12 -250 *5 3000 15 500 -15 -500 *5 4500 +3.3 1000 +12 250 *3.3 4000 +5 1500 +12 250 * Output floating (note 6) E-mail:[email protected] 2015/07/31 REV:21 Tel:886-6-2923150 Page 1 of 5 Peak mA --- Input Current Max. capacitive Load 76 76 76 76 71 71 AQF-30 SERIES AC/DC POWER MODULE 30W Input Specifications Parameter Model Input Voltage Range Input Frequency Range Input Voltage Range All Models 115VAC 230VAC Inrush Current (Cold Start at 25℃) Min. Typ. Max. Unit 85 47 120 ----- ----------- 264 440 370 20 40 VAC Hz VDC A A Min. ------------------------------------- Typ. ±1.0 ±1.0 ±3.0 ±0.2 ±0.5 ±2.5 ±2.5 ±4.0 ±2.0 ±5.0 ±5.0 1.5 1.0 10 20 120 ±0.02 --- Max. ±2.0 ±2.0 --±1.0 ±1.0 ±5.0 ±5.0 --------1.8 1.3 --------5 Unit %Vnom. %Vnom. %Vnom. % % % % % % % % %VPP of Vo %VPP of Vo %Inom. %Inom. % of Vo %/℃ % Vout --- --- % Inom. Typ. ----100 20 200,000 Max. --------- Unit VACrms MΩ KHz ms Hours Output Specifications Parameter Conditions Single / Dual Output Output Voltage Setting Accuracy Vo1 Vo2&Vo3 Dual Positive / Triple Output Line Regulation Vin=Min. to Max. @Full Load Single Output Models Dual Output Models Iout=Min. to Max. Vo1 Triple Output Models Vo2&Vo3 Load Regulation Cross RegulationDual / Triple Output Models Vo1 Vo2 Vo3 Measured output Io = 20% to 100% of rated load Other output(s) set at 50% of rated load 3.3V & 5VDC Output Models Other Output Models Single-,Dual-Output Models and Main Output Triple Output Models Auxiliary Outputs of Triple Output Models Zener diode clamp Ripple & Noise 0-20 MHz Bandwidth Minimum Load Over Voltage Protection Temperature Coefficient Overshoot Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, Automatic Recovery Current Limitation Short Circuit Protection General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) Protection Class II Conditions Input to Output, 60 Seconds 500 VDC Min. 3000 100 ----- MIL-HDBK-217F@25℃, Ground Benign According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 (UL508 for models with order code suffix ICE only) Safety Approvals EMC Specifications Parameter Standards & Level Performance EMI Conduction and Radiation EN55011, EN55022, FCC part 15 Class B EMS EN55011 ,EN55024 ESD Radiated immunity Fast transient Surge Conducted immunity PFMF Dips Interruptions EN61000-4-2 air ± 8kV , Contact ± 4kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms B A B B B A B C E-mail:[email protected] 2015/07/31 REV:21 Tel:886-6-2923150 Page 2 of 5 AQF-30 SERIES AC/DC POWER MODULE 30W Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Storage Temperature Range Power Derating Over Temperature Protection Humidity (non condensing) Cooling Conditions Min. Max. Unit Natural Convection -25 +70 ℃ ℃ W/℃ -40 +50℃ to +70℃ +85 1.125 at 90℃ (automatic recovery at 67℃) --95 % rel. H Natural Convection Lead Temperature (1.5mm from case for 10Sec.) --- ℃ 260 Notes 1 2 3 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. We recommend to protect the converter by a slow blow fuse in the input supply line. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. Other input and output voltage may be available, please contact factory. Peak current can't be drawn from all output at the same time. Floating (or isolated) output of a power supply that is not connected to any other output. Specifications are subject to change without notice 4 5 6 7 Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 21.7 [0.85] 6.0 [0.24] 15.24 [0.60] 12.7 [0.50] 15.24 [0.60] 12.7 [0.50] 0.7 [0.03] Pin Single Dual (D12,D15) 1 4 1.0 [ 0.04] 5 6 3 26.75 [1.05] 3 7 +Vout No Pin -Vout 6 88.9 [3.50] 81.3 [3.20] 27.5 [1.08] Mounting M4.0 Thread Common No Pin NC +Vout2 +Vout2 +Vout2 +Vout1 +Vout1 +Vout1 -Vout2 Com. 2/3 Com. 2/3 -Vout1 -Vout1 -Vout1 NC -Vout3 +Vout3 -Vout 2 1 5.0 [0.20] 31.45 [1.24] NC: No Connection Bottom View ►All dimensions in mm 55.88 [2.20] ►Tolerance: ±0.5 63.5 [2.50] ►Pin Physical Characteristics Case Size : 88.9x63.5x21.7mm (3.50x2.50x0.85 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 177g E-mail:[email protected] 2015/07/31 REV:21 Tel:886-6-2923150 Page 3 of 5 Triple (T5312P,T3512P) AC(L) – AC Line +Vout 4 5 Triple AC(N) – AC Neutral 2 7 Dual (D512) (inches) (±0.02) diameter 1.0 ±0.1 (0.04±0.004) AQF-30 SERIES AC/DC POWER MODULE 30W Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Terminal 4 x 3.5 Dual (D12,D15) Single 1 Indication LED 1 63.8 [2.51] 50.0 [1.97] Top view 2 +Vout 4 -Vout 6 112.0 [4.41] NC -Vout +Vout2 +Vout2 +Vout2 +Vout1 +Vout1 +Vout1 -Vout2 Com. 2/3 Com. 2/3 -Vout1 -Vout1 -Vout1 NC -Vout3 +Vout3 NC: No Connection 10.0 [0.39] ►All dimensions in mm 16.8 [0.66] 5.0 [0.20] 25.6 [1.01] 92.0 [3.62] Common NC 7 100.0 [3.94] +Vout NC 5 POWER"GOOD"INDICATOR ►Tolerance: X.X±0.5 (inches) (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pin pitch tolerance: ±0.25 (0.01) Physical Characteristics Case Size : 112.0x63.8x25.6mm (4.41x2.51x1.01 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 191g Package Specifications with DIN Rail Mounting Bracket (order code AC-DIN-02) Mechanical Dimensions Indication LED Top view 2 1 63.8 [2.51] 7 6 5 4 3 50.0 [1.97] 4 x 3.5 DCON POWER"GOOD"INDICATOR 100.0 [3.94] 112.0 [4.41] Physical Characteristics Case Size : 112.0x63.8x25.6mm (4.41x2.51x1.01 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 245g E-mail:[email protected] 2015/07/31 REV:21 Tel:886-6-2923150 Page 4 of 5 25.6 [1.01] 11.0 [0.43] 3.0 [0.12] 16.8 [0.66] 10.0 [0.39] 5.0 [0.20] 92.0 [3.62] Triple (T5312P,T3512P) AC(L) – AC Line 3 DCON Triple AC(N) – AC Neutral 2 7 6 5 4 3 Dual (D512) AQF-30 SERIES AC/DC POWER MODULE 30W DIN-Rail Mounting Kit Order Code Table PCB Mounting Chassis Mounting PCB Mounting With UL508 Chassis Mounting With UL508 With DIN Rail Mounting by two Order Code Chassis Mounting with UL508 & DIN Rail Mounting by two Order Code AQF-30S05 AQF-30S05C AQF-30S05ICE AQF-30S05CICE AQF-30S05C AC-DIN-02 AQF-30S05CICE AC-DIN-02 AQF-30S12 AQF-30S12C AQF-30S12ICE AQF-30S12CICE AQF-30S12C AC-DIN-02 AQF-30S12CICE AC-DIN-02 AQF-30S15 AQF-30S15C AQF-30S15ICE AQF-30S15CICE AQF-30S15C AC-DIN-02 AQF-30S15CICE AC-DIN-02 AQF-30S24 AQF-30S24C AQF-30S24ICE AQF-30S24CICE AQF-30S24C AC-DIN-02 AQF-30S24CICE AC-DIN-02 AQF-30S48 AQF-30S48C AQF-30S48ICE AQF-30S48CICE AQF-30S48C AC-DIN-02 AQF-30S48CICE AC-DIN-02 AQF-30D12 AQF-30D12C AQF-30D12ICE AQF-30D12CICE AQF-30D12C AC-DIN-02 AQF-30D12CICE AC-DIN-02 AQF-30D15 AQF-30D15C AQF-30D15ICE AQF-30D15CICE AQF-30D15C AC-DIN-02 AQF-30D15CICE AC-DIN-02 AQF-30D512 AQF-30D512C --- --- AQF-30D512C AC-DIN-02 --- --- AQF-30T512 AQF-30T512C --- --- AQF-30T512C AC-DIN-02 --- --- AQF-30T512A AQF-30T512AC --- --- AQF-30T512AC AC-DIN-02 --- --- AQF-30T515 AQF-30T515C --- --- AQF-30T515C AC-DIN-02 --- --- AQF-30T5312P AQF-30T5312PC --- --- AQF-30T5312PC AC-DIN-02 --- --- AQF-30T3512P AQF-30T3512PC --- --- AQF-30T3512PC AC-DIN-02 --- --- Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2015/07/31 REV:21 Page 5 of 5