APM-40 SERIES AC/DC Power Module 40W, Industrial & Medical Safety FEATURES ►Fully encapsulated Plastic Case ►3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting ► Package Dimension 88.9x63.5x30.0 mm (PCB Version) ►Universal Input 85-264VAC, 47-440 Hz ►Protection Class ll ►Extended Operating Temp.Range -40°C to +60°C at full Load ►LED Output Indicator (Chassis Version Models) ►Eco Design, compliant to Energy Star specification and ErP Directive 2009/125/EC ►Industrial Safety to UL/IEC/EN 90650-1 and UL508 ►Medical Safety Approval to UL/IEC/EN 60601-1 3rd Edition ►Over Load and Over Temperature Protection ►3 Year Product Warranty PRODUCT OVERVIEW The new MINMAX APM-40 series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended operating temperature range of -40°C to +80°C. Universal input voltage 85-264VAC and UL/IEC/EN safety approvals including medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide markets. The modules comply with the latest European ErP Directive and meet Energy Star requirements. EMI-filter meets EN55022, class B and FCC,part15, class B. The APM-40 series power modules provide an economical solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output (For model with Chassis Voltage Output Current Input Current Max. capacitive Load Max. 115VAC, 60Hz 230VAC, 50Hz @Max. Load Mounting, add suffix C) VDC 5 12 15 24 ±12 ±15 APM-40S05 APM-40S12 APM-40S15 APM-40S24 APM-40D12 APM-40D15 mA 8000 3330 2660 1660 ±1660 ±1330 mA(typ.) 698 698 698 687 687 687 Efficiency (typ.) @Max. Load, 115VAC μF 8000 3900 3900 680 1500# 1000# # For each output 419 419 419 413 413 413 % 83 83 83 84 84 84 Input Specifications Parameter Model Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC --- --- 0.3 W 115VAC --- --- 25 A 230VAC --- --- 50 A AC Voltage Input Range Input Frequency Range All Models DC Voltage Input Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:[email protected] 2012/06/08 P2 Tel:886-6-2923150 Page 1 of 5 APM-40 SERIES AC/DC Power Module 40W, Industrial & Medical Safety Output Specifications Parameter Conditions Output Voltage Accuracy Line Regulation Min. Typ. Max. Unit ----- ±2.0 ±0.5 ----- % % % % Single Output Model Dual Output Models --±1.0 ----±2.0 --No minimum Load Requirement 5VDC Output Models 1.5 1.8 %VPP of Vo --Other Output Models 1.0 1.3 %VPP of Vo --Zener diode clamp 120 --% of Vo ----±0.02 --%/℃ ----5 % 85VAC, Hiccup Mode, auto-recovery 105 ----% Inom. Hiccup mode, indefinite (automatic recovery) (long term overload condition may cause damage) Load Regulation Min.Load Ripple & Noise (20MHz) Over Voltage Protection Temperature Coefficient Overshoot Current Limitation Short Circuit Protection General Specifications Parameter Conditions I/O Isolation Voltage (reinforced) Leakage Current I/O Isolation Resistance Switching Frequency Min. 500 VDC 115VAC, 60Hz 230VAC, 50Hz MIL-HDBK-217F@25℃, Ground Benign Conducted and radiated Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 Hold-up Time MTBF (calculated) EMC Emission EMC Immunity according EN61000-6-1 EN61000-4-6 EN61000-4-8 EN61000-4-11 Protection Class II Safety (Approvals pending) Typ. Max. Unit 4000 ----VACrms --80 --μA 1000 ----MΩ --130 --KHz --25 --ms --80 --ms TBD ----Hours EN 55011 class B, EN 55022 class B, FCC part 15 Class B Specification Requirement Performance Criteria Air ±8KV Cont. ±4KV B 80~1000MHz, 10V/m 80% AM, 1KHz modulation A AC port ±2KV DC, SL, TL ±2KV not less than 1 min. B 1.2/50μS(8/20μS) AC dif. ±2KV DC ±1KV B 0.15~80MHz, 10Vrms (functional earth ports included) B 80% AM, 1KHz modulation A 50Hz/60Hz, 30A/m 30%, 10ms B 60%, 100ms, 95%, 5000ms C According IEC/EN 60536 cUL/UL 60950-1,60601-1, UL508 listed IEC/EN 60950-1,60601-1 3rd Edition Input Fuse All Models External Fuse (Recommended) 3.15A Slow – Blow Type Environmental Specifications Parameter Conditions Ambient Above +60℃ Temperature Range (operational) Power Derating Storage Temperature Range Over Temperature Protection Humidity (non condensing) Cooling E-mail:[email protected] 2012/06/08 P2 -40℃ -40℃ Shutdown at 90℃ (automatic recovery at approx. 67℃) --Free-Air convection Tel:886-6-2923150 Page 2 of 5 +80℃ 1.5W / ℃ +95℃ 95% rel. H APM-40 SERIES AC/DC Power Module 40W, Industrial & Medical Safety Notes 1 This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other 2 Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. 3 Ripple & Noise measurement bandwidth is 0~20 MHz, measured with a 0.1μF/50V MLCC and a 1μF/50V Aluminum electrolytic. 4 Safety approvals cover frequency 47-63 Hz. 5 All AC/DC modules should be externally fused at the front end for protection. such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 6 Other input and output voltage may be available, please contact factory. 7 To order the module with chassis mount package, please add a suffix C (e.g. APM-40S05C). 8 Part number for DIN-Rail mounting bracket: AC-DIN-02 9 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 10 Specifications subject to change without notice. Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 5 6 15.9 [0.63] 6.0 [0.24] 15.24 [0.60] 12.7 [0.50] 4 0.7 [0.03] 3 81.3 [3.20] 31.6 [1.24] Pin Single Output Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 +Vout +Vout 4 No Pin No Pin 5 -Vout Common 6 No Pin No Pin 7 NC -Vout 88.9 [3.50] 7 12.7 [0.50] 1.0 [ 0.04] 15.24 [0.60] 30.0 [1.18] NC: No Connection Bottom View 2 1 5.0 [0.20] Mounting M4.0 Thread dimensions in mm (inches) ►Tolerance: ±0.5 63.5 [2.50] ►Pin Physical Characteristics Case Size : Case Material : Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : TBD 88.9x63.5x30.0mm (3.50x2.50x1.18 inches) E-mail:[email protected] 2012/06/08 P2 ►All 55.88 [2.20] Tel:886-6-2923150 Page 3 of 5 (±0.02) diameter 1.0 ±0.1 (0.04±0.004) APM-40 SERIES AC/DC Power Module 40W, Industrial & Medical Safety Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Pin Single Output Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 +Vout +Vout 4 NC NC 5 -Vout Common Indication LED 2 Top view 1 63.8 [2.51] 7 6 5 4 3 50.0 [1.97] 4 x O 3.5 POWER "GOOD" INDICATOR 6 NC NC 7 NC -Vout 100.0 [3.94] NC: No Connection 112.0 [4.41] 92.0 [3.62] 34.1 [1.34] 10.0 [0.39] 5.0 [0.20] 16.8 [0.66] ►All Physical Characteristics Case Size : Case Material : 112.0x63.8x34.1mm (4.41x2.51x1.34 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : TBD Package Specifications with DIN Rail Mounting Bracket Mechanical Dimensions Indication LED 2 1 63.8 [2.51] Top view 50.0 [1.97] 4 x O 3.5 7 6 5 4 3 POWER "GOOD" INDICATOR 100.0 [3.94] 112.0 [4.41] Physical Characteristics Case Size : 112.0x63.8x34.1mm (4.41x2.51x1.34 inches) Case Material : Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : TBD 2012/06/08 P2 Tel:886-6-2923150 Page 4 of 5 34.1 [1.34] 11.0[0.43] 3.0[0.12] 5.0 [0.20] 10.0 [0.39] 16.8[0.66] 92.0 [3.62] E-mail:[email protected] dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) APM-40 SERIES AC/DC Power Module 40W, Industrial & Medical Safety DIN-Rail Mounting Bracket (Order code for Kit : AC-DIN-02) Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2012/06/08 P2 Page 5 of 5