ST 78L07 3-Terminal positive voltage regulator 7V • Suitable for TTL, DTL, HTL, C-MOS, power supply • Internal short-circuit current limiting • Internal thermal overload protection • Maximum output current of 150 mA (Tj = 25 OC) • Available in the plastic TO-92 package 1. Output 2. Common 3. Input TO-92 Plastic Package Absolute Maximum Ratings (Ta = 25 OC) Parameter Symbol Value Unit Input Voltage VIN 35 V Power Dissipation Ptot 800 mW Operating Temperature Topr - 30 to + 75 O Storage Temperature Range Tstg - 55 to + 150 O C C Electrical Characteristics (Unless otherwise specified, VIN = 12 V, IOUT = 40 mA, CIN = 0.33 µF, COUT = 0.1 µF, Tj = 25 °C) Parameter Symbol Min. Typ. Max. Output Voltage Input Regulation 9.2 V ≤ VIN ≤ 22 V 10 V ≤ VIN ≤ 22 V Load Regulation 1 mA ≤ IOUT ≤ 100 mA 1 mA ≤ IOUT ≤ 40 mA Output Voltage 9.2 V ≤ VIN ≤ 22 V 1 mA ≤ IOUT ≤ 40 mA Output Voltage VIN = 12 V 1 mA ≤ IOUT ≤ 70 mA Unit VOUT 6.72 7 7.28 V Reg. line - 50 45 160 115 mV Reg. load - 13 56 75 40 mV VOUT 6.65 - 7.35 V VOUT 6.65 - 7.35 V IB - 3.1 6.5 mA - - 1.5 0.1 mA - 50 - µV 37 46 - dB - 1.7 - V - -0.75 - mV/OC Quiescent Current Quiescent Current Change 10 V ≤ VIN ≤ 22 V With line ΔIB 1 mA ≤ IOUT ≤ 40 mA With load Output Noise Voltage VNO at Ta = 25 OC, 10 Hz ≤ f ≤ 100 KHz Ripple Rejection RR at f = 120 Hz, 10 V ≤ VIN ≤ 20 V, Tj = 25 OC Dropout Voltage ⎢VIN-VOUT ⎢ at Tj = 25 OC Average Temperature Coefficient of Output Voltage TCVO at IOUT = 5 mA SEMTECH ELECTRONICS LTD. Subsidiary of Sino-Tech International (BVI) Limited ® Dated : 07/12/2002