2015-4장-02 2015.1.20 03:49 PM 페이지170 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS BP For Speaker Networks Series Non-polarized Solvent Proof ・Non-polarized series for crossover networks in Hi-Fi sound systems ・Excellent frequency characteristics ・Close capacitance tolerance ・Extended voltage range of 25V, 50V, 100V, 200V ・Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance -40 ~ +85° C I = 0.03CV or 3μ A whichever is greater (after 5 minutes) ±20% at 120Hz, 20° C BP Series Frequency Dissipation factor max. (at 120Hz, 20° C) 25WV, 50WV, 100WV 0.10 0.15 1kHz 5kHz Less than specified value Within ±15% of initial value Less than 200% of specified value Polarity reverse each 250 hours Leakage current Capacitance change tanδ Test method Load life (after application of the rated voltage for 2000 hours at 85° C) 200WV 0.12 0.30 After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Shelf life (at 85° C) ● DRAWING Unit : mm Ød±0.05 Tinned copper-ply wire Insulating sleeve ØD+αmax. ØD P±0.5 8 10 12.5 16 18 22 P 3.5 5.0 5.0 7.5 7.5 10.0 Ød 0.6 0.6 0.6 0.8 0.8 1.0 β L+βmax. 15 min. 1.5 2.0 α 4 min. 3.0 0.5 1.0 Safety vent ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT μF WV 25 50 100 200 1.0 1.5 8× 11.5 8× 11.5 67 8× 11.5 82 8× 11.5 2.2 10× 12.5 114 10× 12.5 3.3 10× 12.5 139 10× 12.5 4.7 6.8 10× 12.5 10× 16 222 166 10× 12.5 15 22 33 10× 20 10× 20 10× 20 12.5× 20 297 364 440 10× 16 10× 20 10× 20 10× 20 297 364 440 67 82 114 139 166 222 10× 16 10× 16 10× 16 10× 16 10× 16 10× 20 100 125 150 185 225 275 10 12.5× 20 340 16× 25 403 12.5× 20 420 16× 31.5 540 12.5× 25 543 16× 35.5 687 Case size ØD×L (mm) Ripple current (mA rms) at 85° C, 1kHz 170 678 12.5× 20 678 16× 25 47 68 100 12.5× 25 890 12.5× 25 890 16× 31.5 16× 31.5 950 16× 35.5 737 790 983 16× 40 18× 40 22× 40 884 920 1218 16× 35.5 1170 16× 40 1253