2015-4장-02 2015.1.20 03:47 PM 페이지155 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PF High Ripple Current, High Reliability Series Long Life ・High ripple current for diaplay module ・High reliability withstanding 10000 hours load life at 105° C ・Suited for ballast application ・Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance -40 ~ +105° C I = 0.02CV+15μA (after 5 minutes) ±20% at 120Hz, 20° C WV tanδ Dissipation factor max. (at 120Hz, 20° C) Low temperature characteristics (Impedance ratio at 120Hz) 160 0.15 200 0.15 250 0.15 275 0.20 160 4 200 4 250 4 275 4 WV Z-40° C/Z+20° C Load life After an application of DC bias voltage plus the rated AC ripple current for 10000 hours at 105° C. The measurement shall meet the following limits. The DC voltage plus the peak AC voltage combined must not exceed the rated voltage. Less than specified value Leakage current Within ±20% of initial value Capacitance change Less than 200% of specified value tanδ Shelf life (at 105° C) After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Unit : mm ● DRAWING Ød±0.05 Tinned copper-ply wire ØD+0.5 max. Insulating sleeve ＋ P±0.5 － L+βmax. 15 min. ØD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Ød 0.6 0.6 0.8 0.8 β 4 min. 2.0 MINIATURE TYPES Safety vent ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV μF 10 22 33 47 68 82 100 120 150 160 10 10 10 10 12.5 12.5 12.5 16 16 × × × × × × × × × 16 16 20 20 20 25 25 20 25 200 10 × 16 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 20 16 × 20 16×20, 18×20 320 500 650 750 970 1060 1250 1350 1610 18 × 25 250 320 500 650 840 970 1125 1230 1435 1740 10 10 12.5 12.5 16 16 16 18 18 18 × × × × × × × × × × 16 20 20 20 20 20 25 25 25 31.5 275 320 500 770 980 1080 1190 1425 1660 2000 2075 × × × × × × 18 × 18 × 10 12.5 12.5 16 18 18 20 20 25 25 25 25 31.5 35.5 350 500 840 970 1100 1400 1600 1900 Ripple current (mA rms) at 105° C, 100kHz Case size ØD×L (mm) ● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency(Hz) 50(60)Hz 120Hz 1kHz 10kHz 50kHz 100kHz≦ Coefficient 0.30 0.40 0.70 0.80 0.90 1.00 155