LARGE ALUMINUM ELECTROLYTIC CAPACITORS For Photo Flash Series DF For photo flash applications with lug terminal Low dissipation factor, low leakage current and high stability during the repetition of charge and discharge Complied to the RoHS directive Item Characteristics -20 ~ +55 C -10 ~ +20% at 120Hz, 20 C I=1 C ( A) (after 5 minutes), where C=Nominal capacitance ( F) Operating temperature range Capacitance tolerance Leakage current max. Capacitance range( F) tan Dissipation factor max. (at 120Hz, 20 C) 150 ~ 600 0.10 700 ~ 1500 0.15 Charge and discharge at rated voltage at 5~35 C with a switch sequence of 30 seconds for 5000 times via xenon flash tube with discharge resistance of 0.7~1.0 Charge and discharge Less than 150% of specified value Within 10% of initial value Less than 150% of specified value Leakage current Capacitance change tan characteristics After leaving capacitors under no load at 55 C for 1000 hours. The measurement shall be performed at 20 C by the KS C IEC 60384 - 4 Less than 300% of specified value Leakage current Within 10% of initial value Capacitance change Less than 150% of specified value tan Shelf life Unit : mm DRAWING D 22 A 1 P 1 Insulating sleeve D 1 max. Bottom plate A B p Safety vent Note : L 2 max. D=22 D 3.5 6.0 8.0 4.5 8.0 10.0 25.4 D 40 4.5 11.0 18.0 B 1 40 is available upon request. Please check with us individual size and dimensions. LARGE TYPES 237 LARGE ALUMINUM ELECTROLYTIC CAPACITORS DF series DIMENSIONS D L(mm) D WV (SV) 22 25.4 30 35 F 200 250 22 27 300 22 30 350 22 33 400 22 36 25.4 30 450 22 42 25.4 33 500 22 44 25.4 37 330 (350) 600 25.4 42 30 33 700 25.4 47 30 38 800 25.4 54 30 42 900 25.4 57 30 45 1000 30 48 35 40 1200 30 58 35 45 1300 30 63 35 50 1500 30 70 35 55 200 22 27 250 22 30 300 22 36 25.4 30 350 22 40 25.4 33 400 22 42 25.4 35 450 22 48 25.4 40 500 25.4 44 30 35 600 25.4 54 30 38 700 25.4 57 30 45 800 30 50 35 40 900 30 55 35 45 1000 30 58 35 55 1200 30 70 35 55 1300 35 60 1500 35 70 360 (390) 238